Re: [PATCH v7 0/6] Build and support rk3036 SoC platform

[Xing Zheng <zhengxing@rock-chips.com>]

OK, Thanks Heiko. :-)

On 2015年11月24日 08:03, Heiko Stübner wrote:
> Hi Xing Zheng,
>
> Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng:
>> Hi,
>>    We need to support rk3036 soc platform via upstream, there are
>> some primary parts for the initial release of minimum system: dts,
>> clk-pll, smp, and clock tree for rk3036, and additional, we can use
>> these startup and run to init processs.
> [...]
>
> after talking with Mike and agreeing that I'm again taking the regular
> clock patches to them, I've applied all of this to appropriate branches.
> I did some cosmetics, as explained below.
>
>
>> Xing Zheng (6):
>>    dt-bindings: add documentation of rk3036 clock controller
>>    clk: rockchip: add dt-binding header for rk3036
>>    clk: rockchip: add new pll-type for rk3036 and similar socs
> - wrapped some overly long lines, otherwise this is similar to what
>    Stephen already took for the rk3066-pll-type.
>
>
>>    clk: rockchip: add clock controller for rk3036
>>    ARM: dts: rockchip: add core rk3036 dts
> - split off the evb into a separate patch
> - reordered some nodes (please order by the address (the @xxxxxxxx)
> - reordered some properties
> - fixed the gic cpu masks
>
>
>>    ARM: dts: enable smp for rk3036
> folded into the core dtsi addition
>
>
> Please take a final look at [0] to make sure I didn't mess up anything.
>
>
> Thanks
> Heiko
>
>
> [0]
> https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/next
> https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-armsoc/dts32
>
>
>