* [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support
2015-11-23 10:07 [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Huang Rui
@ 2015-11-23 10:07 ` Huang Rui
2015-11-24 14:00 ` Guenter Roeck
2015-12-27 19:46 ` Wim Van Sebroeck
2015-11-24 13:58 ` [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Guenter Roeck
2015-12-27 19:45 ` Wim Van Sebroeck
2 siblings, 2 replies; 8+ messages in thread
From: Huang Rui @ 2015-11-23 10:07 UTC (permalink / raw)
To: Guenter Roeck, Wim Van Sebroeck
Cc: linux-watchdog, linux-kernel, Denis Turischev, Borislav Petkov,
Vincent Wan, Tony Li, Huang Rui
sp5100_tco watchdog is also supported on AMD KernCZ chipset of Carrizo
platform.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Denis Turischev <denis.turischev@compulab.co.il>
---
drivers/watchdog/sp5100_tco.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index c9dd419..6467b91 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -308,6 +308,8 @@ static const struct pci_device_id sp5100_tco_pci_tbl[] = {
PCI_ANY_ID, },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID,
PCI_ANY_ID, },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
+ PCI_ANY_ID, },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support
2015-11-23 10:07 ` [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support Huang Rui
@ 2015-11-24 14:00 ` Guenter Roeck
2015-12-27 19:46 ` Wim Van Sebroeck
1 sibling, 0 replies; 8+ messages in thread
From: Guenter Roeck @ 2015-11-24 14:00 UTC (permalink / raw)
To: Huang Rui, Wim Van Sebroeck
Cc: linux-watchdog, linux-kernel, Denis Turischev, Borislav Petkov,
Vincent Wan, Tony Li
On 11/23/2015 02:07 AM, Huang Rui wrote:
> sp5100_tco watchdog is also supported on AMD KernCZ chipset of Carrizo
> platform.
>
> Signed-off-by: Huang Rui <ray.huang@amd.com>
> Cc: Denis Turischev <denis.turischev@compulab.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/sp5100_tco.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index c9dd419..6467b91 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -308,6 +308,8 @@ static const struct pci_device_id sp5100_tco_pci_tbl[] = {
> PCI_ANY_ID, },
> { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID,
> PCI_ANY_ID, },
> + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
> + PCI_ANY_ID, },
> { 0, }, /* End of list */
> };
> MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support
2015-11-23 10:07 ` [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support Huang Rui
2015-11-24 14:00 ` Guenter Roeck
@ 2015-12-27 19:46 ` Wim Van Sebroeck
1 sibling, 0 replies; 8+ messages in thread
From: Wim Van Sebroeck @ 2015-12-27 19:46 UTC (permalink / raw)
To: Huang Rui
Cc: Guenter Roeck, linux-watchdog, linux-kernel, Denis Turischev,
Borislav Petkov, Vincent Wan, Tony Li
Hi Rui,
> sp5100_tco watchdog is also supported on AMD KernCZ chipset of Carrizo
> platform.
>
> Signed-off-by: Huang Rui <ray.huang@amd.com>
> Cc: Denis Turischev <denis.turischev@compulab.co.il>
> ---
> drivers/watchdog/sp5100_tco.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index c9dd419..6467b91 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -308,6 +308,8 @@ static const struct pci_device_id sp5100_tco_pci_tbl[] = {
> PCI_ANY_ID, },
> { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID,
> PCI_ANY_ID, },
> + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
> + PCI_ANY_ID, },
> { 0, }, /* End of list */
> };
> MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
> --
> 1.9.1
>
This patch has been added to linux-watchdog-next.
Kind regards,
Wim.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets
2015-11-23 10:07 [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Huang Rui
2015-11-23 10:07 ` [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support Huang Rui
@ 2015-11-24 13:58 ` Guenter Roeck
2015-11-25 1:59 ` Huang Rui
2015-12-27 19:45 ` Wim Van Sebroeck
2 siblings, 1 reply; 8+ messages in thread
From: Guenter Roeck @ 2015-11-24 13:58 UTC (permalink / raw)
To: Huang Rui, Wim Van Sebroeck
Cc: linux-watchdog, linux-kernel, Denis Turischev, Borislav Petkov,
Vincent Wan, Tony Li
On 11/23/2015 02:07 AM, Huang Rui wrote:
> For SB800 and later chipsets, the register definitions are the same
> with SB800. And for SB700 and older chipsets, the definitions should
> be same with SP5100/SB7x0.
>
> Signed-off-by: Huang Rui <ray.huang@amd.com>
> Cc: Denis Turischev <denis.turischev@compulab.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Would it make sense to rework this driver as pci driver ?
Thanks,
Guenter
> ---
>
> Hi Guenter,
>
> These two patches should be on top of "sp5100_tco: Add AMD Mullins
> platform support". And are rebased at watchdog-next branch.
>
> Thanks,
> Rui
>
> ---
> drivers/watchdog/sp5100_tco.c | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index ef039f8..c9dd419 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -333,21 +333,24 @@ static unsigned char sp5100_tco_setupdevice(void)
> if (!sp5100_tco_pci)
> return 0;
>
> - pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
> + pr_info("PCI Vendor ID: 0x%x, Device ID: 0x%x, Revision ID: 0x%x\n",
> + sp5100_tco_pci->vendor, sp5100_tco_pci->device,
> + sp5100_tco_pci->revision);
>
> /*
> * Determine type of southbridge chipset.
> */
> - if (sp5100_tco_pci->revision >= 0x40) {
> - dev_name = SB800_DEVNAME;
> - index_reg = SB800_IO_PM_INDEX_REG;
> - data_reg = SB800_IO_PM_DATA_REG;
> - base_addr = SB800_PM_WATCHDOG_BASE;
> - } else {
> + if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> + sp5100_tco_pci->revision < 0x40) {
> dev_name = SP5100_DEVNAME;
> index_reg = SP5100_IO_PM_INDEX_REG;
> data_reg = SP5100_IO_PM_DATA_REG;
> base_addr = SP5100_PM_WATCHDOG_BASE;
> + } else {
> + dev_name = SB800_DEVNAME;
> + index_reg = SB800_IO_PM_INDEX_REG;
> + data_reg = SB800_IO_PM_DATA_REG;
> + base_addr = SB800_PM_WATCHDOG_BASE;
> }
>
> /* Request the IO ports used by this driver */
> @@ -383,7 +386,12 @@ static unsigned char sp5100_tco_setupdevice(void)
> * Secondly, Find the watchdog timer MMIO address
> * from SBResource_MMIO register.
> */
> - if (sp5100_tco_pci->revision >= 0x40) {
> + if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> + sp5100_tco_pci->revision < 0x40) {
> + /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
> + pci_read_config_dword(sp5100_tco_pci,
> + SP5100_SB_RESOURCE_MMIO_BASE, &val);
> + } else {
> /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
> outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
> val = inb(SB800_IO_PM_DATA_REG);
> @@ -393,10 +401,6 @@ static unsigned char sp5100_tco_setupdevice(void)
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> - } else {
> - /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
> - pci_read_config_dword(sp5100_tco_pci,
> - SP5100_SB_RESOURCE_MMIO_BASE, &val);
> }
>
> /* The SBResource_MMIO is enabled and mapped memory space? */
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets
2015-11-24 13:58 ` [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Guenter Roeck
@ 2015-11-25 1:59 ` Huang Rui
2015-11-25 2:11 ` Guenter Roeck
0 siblings, 1 reply; 8+ messages in thread
From: Huang Rui @ 2015-11-25 1:59 UTC (permalink / raw)
To: Guenter Roeck
Cc: Wim Van Sebroeck, linux-watchdog, linux-kernel, Denis Turischev,
Borislav Petkov, Vincent Wan, Tony Li
On Tue, Nov 24, 2015 at 05:58:03AM -0800, Guenter Roeck wrote:
> On 11/23/2015 02:07 AM, Huang Rui wrote:
> >For SB800 and later chipsets, the register definitions are the same
> >with SB800. And for SB700 and older chipsets, the definitions should
> >be same with SP5100/SB7x0.
> >
> >Signed-off-by: Huang Rui <ray.huang@amd.com>
> >Cc: Denis Turischev <denis.turischev@compulab.co.il>
>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>
> Would it make sense to rework this driver as pci driver ?
>
I agree with you. Actually, I thought about this stuff. But sp5100
watchdog is not a pci device in AMD chipset. In another word, it
doesn't export a pci header to OS. At current, we use SMBus pci device
id and vendor id to detect watchdog on the AMD chipset (Because AMD
use SMBus device id and revsion to identify different chipset
version). At the same time, SMbus has its own driver piix4_smbus.
Looks like we don't have a pci header to enumerate the watchdog.
Thanks,
Rui
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets
2015-11-25 1:59 ` Huang Rui
@ 2015-11-25 2:11 ` Guenter Roeck
0 siblings, 0 replies; 8+ messages in thread
From: Guenter Roeck @ 2015-11-25 2:11 UTC (permalink / raw)
To: Huang Rui
Cc: Wim Van Sebroeck, linux-watchdog, linux-kernel, Denis Turischev,
Borislav Petkov, Vincent Wan, Tony Li
On 11/24/2015 05:59 PM, Huang Rui wrote:
> On Tue, Nov 24, 2015 at 05:58:03AM -0800, Guenter Roeck wrote:
>> On 11/23/2015 02:07 AM, Huang Rui wrote:
>>> For SB800 and later chipsets, the register definitions are the same
>>> with SB800. And for SB700 and older chipsets, the definitions should
>>> be same with SP5100/SB7x0.
>>>
>>> Signed-off-by: Huang Rui <ray.huang@amd.com>
>>> Cc: Denis Turischev <denis.turischev@compulab.co.il>
>>
>> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>>
>> Would it make sense to rework this driver as pci driver ?
>>
>
> I agree with you. Actually, I thought about this stuff. But sp5100
> watchdog is not a pci device in AMD chipset. In another word, it
> doesn't export a pci header to OS. At current, we use SMBus pci device
> id and vendor id to detect watchdog on the AMD chipset (Because AMD
> use SMBus device id and revsion to identify different chipset
> version). At the same time, SMbus has its own driver piix4_smbus.
> Looks like we don't have a pci header to enumerate the watchdog.
>
Ok, thanks for the clarification. Odd way to detect the chip, but
I guess one has to use what is available.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets
2015-11-23 10:07 [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Huang Rui
2015-11-23 10:07 ` [PATCH 2/2] sp5100_tco: Add AMD Carrizo platform support Huang Rui
2015-11-24 13:58 ` [PATCH 1/2] sp5100_tco: fix the device check for SB800 and later chipsets Guenter Roeck
@ 2015-12-27 19:45 ` Wim Van Sebroeck
2 siblings, 0 replies; 8+ messages in thread
From: Wim Van Sebroeck @ 2015-12-27 19:45 UTC (permalink / raw)
To: Huang Rui
Cc: Guenter Roeck, linux-watchdog, linux-kernel, Denis Turischev,
Borislav Petkov, Vincent Wan, Tony Li
Hi Rui,
> For SB800 and later chipsets, the register definitions are the same
> with SB800. And for SB700 and older chipsets, the definitions should
> be same with SP5100/SB7x0.
>
> Signed-off-by: Huang Rui <ray.huang@amd.com>
> Cc: Denis Turischev <denis.turischev@compulab.co.il>
> ---
>
> Hi Guenter,
>
> These two patches should be on top of "sp5100_tco: Add AMD Mullins
> platform support". And are rebased at watchdog-next branch.
>
> Thanks,
> Rui
>
> ---
> drivers/watchdog/sp5100_tco.c | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
> index ef039f8..c9dd419 100644
> --- a/drivers/watchdog/sp5100_tco.c
> +++ b/drivers/watchdog/sp5100_tco.c
> @@ -333,21 +333,24 @@ static unsigned char sp5100_tco_setupdevice(void)
> if (!sp5100_tco_pci)
> return 0;
>
> - pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
> + pr_info("PCI Vendor ID: 0x%x, Device ID: 0x%x, Revision ID: 0x%x\n",
> + sp5100_tco_pci->vendor, sp5100_tco_pci->device,
> + sp5100_tco_pci->revision);
>
> /*
> * Determine type of southbridge chipset.
> */
> - if (sp5100_tco_pci->revision >= 0x40) {
> - dev_name = SB800_DEVNAME;
> - index_reg = SB800_IO_PM_INDEX_REG;
> - data_reg = SB800_IO_PM_DATA_REG;
> - base_addr = SB800_PM_WATCHDOG_BASE;
> - } else {
> + if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> + sp5100_tco_pci->revision < 0x40) {
> dev_name = SP5100_DEVNAME;
> index_reg = SP5100_IO_PM_INDEX_REG;
> data_reg = SP5100_IO_PM_DATA_REG;
> base_addr = SP5100_PM_WATCHDOG_BASE;
> + } else {
> + dev_name = SB800_DEVNAME;
> + index_reg = SB800_IO_PM_INDEX_REG;
> + data_reg = SB800_IO_PM_DATA_REG;
> + base_addr = SB800_PM_WATCHDOG_BASE;
> }
>
> /* Request the IO ports used by this driver */
> @@ -383,7 +386,12 @@ static unsigned char sp5100_tco_setupdevice(void)
> * Secondly, Find the watchdog timer MMIO address
> * from SBResource_MMIO register.
> */
> - if (sp5100_tco_pci->revision >= 0x40) {
> + if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
> + sp5100_tco_pci->revision < 0x40) {
> + /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
> + pci_read_config_dword(sp5100_tco_pci,
> + SP5100_SB_RESOURCE_MMIO_BASE, &val);
> + } else {
> /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
> outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
> val = inb(SB800_IO_PM_DATA_REG);
> @@ -393,10 +401,6 @@ static unsigned char sp5100_tco_setupdevice(void)
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
> val = val << 8 | inb(SB800_IO_PM_DATA_REG);
> - } else {
> - /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
> - pci_read_config_dword(sp5100_tco_pci,
> - SP5100_SB_RESOURCE_MMIO_BASE, &val);
> }
>
> /* The SBResource_MMIO is enabled and mapped memory space? */
> --
> 1.9.1
>
This patch has been added to linux-watchdog-next.
Kind regards,
Wim.
^ permalink raw reply [flat|nested] 8+ messages in thread