From: Josh Wu <josh.wu@atmel.com>
To: LABBE Corentin <clabbe.montjoie@gmail.com>
Cc: <computersforpeace@gmail.com>, <dwmw2@infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>
Subject: Re: [PATCH v2 2/2] mtd: nand: atmel_nand: fix a possible NULL dereference
Date: Wed, 25 Nov 2015 10:20:02 +0800 [thread overview]
Message-ID: <56551AD2.3010607@atmel.com> (raw)
In-Reply-To: <20151124131218.GA7545@Red>
Hi, Corentin
On 11/24/2015 9:12 PM, LABBE Corentin wrote:
> On Fri, Nov 20, 2015 at 04:33:14PM +0800, Josh Wu wrote:
>> Hi, Corentin
>>
>> Thanks for the patch. It looks fine to me, just one nitpick in below:
>>
>> On 11/20/2015 3:45 PM, LABBE Corentin wrote:
>>> of_match_device could return NULL, and so cause a NULL pointer
>>> dereference later.
>>>
>>> Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
>>> ---
>>> drivers/mtd/nand/atmel_nand.c | 5 +++--
>>> 1 file changed, 3 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
>>> index 475c938..7902967 100644
>>> --- a/drivers/mtd/nand/atmel_nand.c
>>> +++ b/drivers/mtd/nand/atmel_nand.c
>>> @@ -1496,8 +1496,9 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
>>> struct atmel_nand_data *board = &host->board;
>>> enum of_gpio_flags flags = 0;
>>>
>>> - host->caps = (struct atmel_nand_caps *)
>>> - of_match_device(atmel_nand_dt_ids, host->dev)->data;
>>> + host->caps = of_device_get_match_data(host->dev);
>>> + if (!host->caps)
>>> + return 1;
>> it's better to use -EINVAL here.
>>
> Hello
>
> I do that Uwe Kleine-König said to me to do in others thread:
> https://lkml.org/lkml/2015/11/12/70 and https://lkml.org/lkml/2015/11/16/211
Thank you for the information.
I checked the imx serial driver(drivers/tty/serial/imx.c) in
serial_imx_probe():
...
ret = serial_imx_probe_dt(sport, pdev);
if (ret > 0) ---> So here is why you need to return 1 in
serial_imx_probe_dt().
serial_imx_probe_pdata(sport, pdev);
else if (ret < 0)
return ret;
There has a branch to check whether ret is > 0 or < 0. So that's why you
need to return 1 in imx serial driver.
But in atmel_nand driver, we don't have such code for that. The
atmel_of_init_port() is only used for dt probe. So if dt is not matched,
just return an error.
>
> Regards
>
Best Regards,
Josh Wu
prev parent reply other threads:[~2015-11-25 2:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-20 7:45 [PATCH v2 0/2] fix a possible NULL dereference LABBE Corentin
2015-11-20 7:45 ` [PATCH v2 1/2] mtd: nand: atmel_nand: constify atmel_nand_caps structures LABBE Corentin
2015-11-20 8:28 ` Josh Wu
2015-11-20 17:57 ` Brian Norris
2015-11-20 7:45 ` [PATCH v2 2/2] mtd: nand: atmel_nand: fix a possible NULL dereference LABBE Corentin
2015-11-20 8:33 ` Josh Wu
2015-11-24 13:12 ` LABBE Corentin
2015-11-25 2:20 ` Josh Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56551AD2.3010607@atmel.com \
--to=josh.wu@atmel.com \
--cc=clabbe.montjoie@gmail.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox