From: Robin Murphy <robin.murphy@arm.com>
To: Lu Baolu <baolu.lu@linux.intel.com>,
Joerg Roedel <joro@8bytes.org>,
Sanjay Kumar <sanjay.k.kumar@intel.com>,
Kevin Tian <kevin.tian@intel.com>,
Ashok Raj <ashok.raj@intel.com>,
Jacob Pan <jacob.jun.pan@linux.intel.com>,
Dave Jiang <dave.jiang@intel.com>, Liu Yi L <yi.l.liu@intel.com>
Cc: iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] iommu/vt-d: Disallow SVA if devices don't support 64-bit address
Date: Wed, 21 Jul 2021 12:12:10 +0100 [thread overview]
Message-ID: <5662caea-a974-e511-9509-010606fda251@arm.com> (raw)
In-Reply-To: <4d3a2546-da21-605d-26a9-1f6f52123056@linux.intel.com>
On 2021-07-21 02:50, Lu Baolu wrote:
> Hi Robin,
>
> Thanks a lot for reviewing my patch!
>
> On 7/20/21 5:27 PM, Robin Murphy wrote:
>> On 2021-07-20 02:38, Lu Baolu wrote:
>>> When the device and CPU share an address space (such as SVA), the device
>>> must support the same addressing capability as the CPU. The CPU does not
>>> consider the addressing ability of any device when managing the page
>>> table
>>> of a process, so the device must have enough addressing ability to bind
>>> the page table of the process.
>>>
>>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>>> ---
>>> drivers/iommu/intel/iommu.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
>>> index f45c80ce2381..f3cca1dd384d 100644
>>> --- a/drivers/iommu/intel/iommu.c
>>> +++ b/drivers/iommu/intel/iommu.c
>>> @@ -5372,6 +5372,9 @@ static int intel_iommu_enable_sva(struct device
>>> *dev)
>>> if (!(iommu->flags & VTD_FLAG_SVM_CAPABLE))
>>> return -ENODEV;
>>> + if (!dev->dma_mask || *dev->dma_mask != DMA_BIT_MASK(64))
>>
>> Careful - VFIO doesn't set DMA masks (since it doesn't use the DMA API),
>
> SVA doesn't work through the VFIO framework.
Did anyone say it does? My point is that, as far as I understand, the
SVA UAPI is very much intended to work *with* VFIO, and even if the
finer details are still mired in the /dev/ioasid discussion today we
should definitely expect to see VFIO-like use-cases at some point. I
certainly don't see why any of the guest SVA stuff exists already if not
for VFIO-assigned devices?
>> so this appears to be relying on another driver having bound previously,
>
> Yes. You are right.
>
>> otherwise the mask would still be the default 32-bit one from
>> pci_setup_device(). I'm not sure that's an entirely robust assumption.
>
> Currently SVA implementation always requires a native kernel driver. The
> assumption is that the drivers should check and set 64-bit addressing
> capability before calling iommu_sva_xxx() APIs.
...and given that that is not a documented requirement, and certainly
not a technical one (even a self-contained kernel driver could choose to
only use SVA contexts and not touch the DMA API), it's an inherently
fragile assumption which I'm confident *will* be broken eventually :)
Robin.
>>> + return -ENODEV;
>>> +
>>> if (intel_iommu_enable_pasid(iommu, dev))
>>> return -ENODEV;
>>>
>
> Best regards,
> baolu
next prev parent reply other threads:[~2021-07-21 11:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-20 1:38 [PATCH 0/5] iommu/vt-d: Several minor adjustments Lu Baolu
2021-07-20 1:38 ` [PATCH 1/5] iommu/vt-d: Refactor Kconfig a bit Lu Baolu
2021-07-20 1:38 ` [PATCH 2/5] iommu/vt-d: Enable Intel IOMMU scalable mode by default Lu Baolu
2021-07-20 1:38 ` [PATCH 3/5] iommu/vt-d: Preset A/D bits for user space DMA usage Lu Baolu
2021-07-20 1:38 ` [PATCH 4/5] iommu/vt-d: Disallow SVA if devices don't support 64-bit address Lu Baolu
2021-07-20 9:27 ` Robin Murphy
2021-07-21 1:50 ` Lu Baolu
2021-07-21 11:12 ` Robin Murphy [this message]
2021-07-21 14:17 ` Lu Baolu
2021-07-20 1:38 ` [PATCH 5/5] iommu/vt-d: Allow devices to have more than 32 outstanding PRs Lu Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5662caea-a974-e511-9509-010606fda251@arm.com \
--to=robin.murphy@arm.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dave.jiang@intel.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sanjay.k.kumar@intel.com \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox