From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
myungjoo.ham@samsung.com, kgene@kernel.org
Cc: kyungmin.park@samsung.com, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, tjakobi@math.uni-bielefeld.de,
linux.amoon@gmail.com, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 04/19] ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk
Date: Thu, 10 Dec 2015 09:53:05 +0900 [thread overview]
Message-ID: <5668CCF1.8080807@samsung.com> (raw)
In-Reply-To: <1449634091-1842-5-git-send-email-cw00.choi@samsung.com>
On 09.12.2015 13:07, Chanwoo Choi wrote:
> This patch adds the DMC (Dynamic Memory Controller) bus frequency node
> which includes the devfreq-events and regulator properties. The bus
> frequency support the DVFS (Dynamic Voltage Frequency Scaling) feature
> with ondemand governor.
>
> The devfreq-events (ppmu_dmc0*) can monitor the utilization of DMC bus
> on runtime and the buck1_reg (VDD_MIF power line) supplies the power to
> the DMC block.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> arch/arm/boot/dts/exynos3250-monk.dts | 6 ++++++
> arch/arm/boot/dts/exynos3250-rinato.dts | 6 ++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
> index 443a35085846..d982586a6533 100644
> --- a/arch/arm/boot/dts/exynos3250-monk.dts
> +++ b/arch/arm/boot/dts/exynos3250-monk.dts
> @@ -498,6 +498,12 @@
> };
> };
>
> +&bus_dmc {
> + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> + vdd-supply = <&buck1_reg>;
> + status = "okay";
> +};
> +
> &xusbxti {
> clock-frequency = <24000000>;
> };
> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> index 3e64d5dcdd60..61477943015b 100644
> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> @@ -675,6 +675,12 @@
> };
> };
>
> +&bus_dmc {
> + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> + vdd-supply = <&buck1_reg>;
> + status = "okay";
> +};
I would prefer to put this in alphabetical order... which could be
tricky because the nodes are not entirely sorted. Maybe after the "&adc"
node?
Anyway the change looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
next prev parent reply other threads:[~2015-12-10 0:53 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 4:07 [PATCH v2 00/19] PM / devferq: Add generic exynos bus frequency driver and new passive governor Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 01/19] PM / devfreq: exynos: Add generic exynos bus frequency driver Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 02/19] PM / devfreq: exynos: Add documentation for " Chanwoo Choi
2015-12-10 0:39 ` Krzysztof Kozlowski
2015-12-10 0:49 ` Chanwoo Choi
2015-12-10 1:25 ` Krzysztof Kozlowski
2015-12-10 1:33 ` Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 03/19] ARM: dts: Add DMC bus node for Exynos3250 Chanwoo Choi
2015-12-10 0:44 ` Krzysztof Kozlowski
2015-12-10 1:09 ` Chanwoo Choi
2015-12-10 1:20 ` Krzysztof Kozlowski
2015-12-10 2:00 ` Chanwoo Choi
2015-12-10 2:04 ` Krzysztof Kozlowski
2015-12-10 2:17 ` Chanwoo Choi
2015-12-10 2:21 ` Krzysztof Kozlowski
2015-12-09 4:07 ` [PATCH v2 04/19] ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk Chanwoo Choi
2015-12-10 0:53 ` Krzysztof Kozlowski [this message]
2015-12-10 0:56 ` Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 05/19] PM / devfreq: Add new passive governor Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 06/19] PM / devfreq: Add devfreq_get_devfreq_by_phandle() Chanwoo Choi
2015-12-09 4:07 ` [PATCH v2 07/19] PM / devfreq: Show the related information according to governor type Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 08/19] PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 09/19] PM / devfreq: exynos: Update documentation for bus devices " Chanwoo Choi
2015-12-10 1:31 ` Krzysztof Kozlowski
2015-12-10 1:36 ` Chanwoo Choi
2015-12-10 14:21 ` Rob Herring
2015-12-10 15:10 ` Chanwoo Choi
2015-12-11 3:24 ` Rob Herring
2015-12-11 3:56 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 10/19] PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 11/19] PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 12/19] ARM: dts: Add bus nodes using VDD_INT for Exynos3250 Chanwoo Choi
2015-12-10 2:09 ` Krzysztof Kozlowski
2015-12-10 2:30 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 Chanwoo Choi
2015-12-10 3:17 ` Krzysztof Kozlowski
2015-12-10 4:21 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT " Chanwoo Choi
2015-12-10 5:57 ` Krzysztof Kozlowski
2015-12-10 6:08 ` Chanwoo Choi
2015-12-10 6:32 ` Krzysztof Kozlowski
2015-12-10 6:43 ` Chanwoo Choi
2015-12-10 6:53 ` Krzysztof Kozlowski
2015-12-10 7:07 ` Chanwoo Choi
2015-12-10 7:12 ` Krzysztof Kozlowski
2015-12-10 7:18 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 15/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 16/19] ARM: dts: Add PPMU node for exynos4412-odroidu3 Chanwoo Choi
2015-12-10 6:44 ` Krzysztof Kozlowski
2015-12-11 2:27 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 17/19] ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato Chanwoo Choi
2015-12-10 6:58 ` Krzysztof Kozlowski
2015-12-10 7:24 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 18/19] ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 Chanwoo Choi
2015-12-10 7:02 ` Krzysztof Kozlowski
2015-12-10 7:19 ` Chanwoo Choi
2015-12-09 4:08 ` [PATCH v2 19/19] ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 Chanwoo Choi
2015-12-10 7:08 ` Krzysztof Kozlowski
2015-12-10 7:23 ` Chanwoo Choi
2015-12-09 19:05 ` [PATCH v2 00/19] PM / devferq: Add generic exynos bus frequency driver and new passive governor Anand Moon
2015-12-10 0:12 ` Chanwoo Choi
2015-12-10 4:14 ` Anand Moon
2015-12-10 4:20 ` Chanwoo Choi
2015-12-10 0:57 ` Krzysztof Kozlowski
2015-12-10 1:22 ` Krzysztof Kozlowski
2015-12-10 2:16 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5668CCF1.8080807@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox