From: Paolo Bonzini <pbonzini@redhat.com>
To: Andy Lutomirski <luto@kernel.org>,
x86@kernel.org, Marcelo Tosatti <mtosatti@redhat.com>,
Radim Krcmar <rkrcmar@redhat.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
Alexander Graf <agraf@suse.de>,
Andy Lutomirski <luto@amacapital.net>
Subject: Re: [PATCH 2/5] x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
Date: Thu, 10 Dec 2015 10:09:39 +0100 [thread overview]
Message-ID: <56694153.7020309@redhat.com> (raw)
In-Reply-To: <6b51dcc41f1b101f963945c5ec7093d72bdac429.1449702533.git.luto@kernel.org>
On 10/12/2015 00:12, Andy Lutomirski wrote:
> From: Andy Lutomirski <luto@amacapital.net>
>
> The pvclock vdso code was too abstracted to understand easily and
> excessively paranoid. Simplify it for a huge speedup.
>
> This opens the door for additional simplifications, as the vdso no
> longer accesses the pvti for any vcpu other than vcpu 0.
>
> Before, vclock_gettime using kvm-clock took about 45ns on my machine.
> With this change, it takes 29ns, which is almost as fast as the pure TSC
> implementation.
>
> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> ---
> arch/x86/entry/vdso/vclock_gettime.c | 81 ++++++++++++++++++++----------------
> 1 file changed, 46 insertions(+), 35 deletions(-)
>
> diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
> index ca94fa649251..c325ba1bdddf 100644
> --- a/arch/x86/entry/vdso/vclock_gettime.c
> +++ b/arch/x86/entry/vdso/vclock_gettime.c
> @@ -78,47 +78,58 @@ static notrace const struct pvclock_vsyscall_time_info *get_pvti(int cpu)
>
> static notrace cycle_t vread_pvclock(int *mode)
> {
> - const struct pvclock_vsyscall_time_info *pvti;
> + const struct pvclock_vcpu_time_info *pvti = &get_pvti(0)->pvti;
> cycle_t ret;
> - u64 last;
> - u32 version;
> - u8 flags;
> - unsigned cpu, cpu1;
> -
> + u64 tsc, pvti_tsc;
> + u64 last, delta, pvti_system_time;
> + u32 version, pvti_tsc_to_system_mul, pvti_tsc_shift;
>
> /*
> - * Note: hypervisor must guarantee that:
> - * 1. cpu ID number maps 1:1 to per-CPU pvclock time info.
> - * 2. that per-CPU pvclock time info is updated if the
> - * underlying CPU changes.
> - * 3. that version is increased whenever underlying CPU
> - * changes.
> + * Note: The kernel and hypervisor must guarantee that cpu ID
> + * number maps 1:1 to per-CPU pvclock time info.
> + *
> + * Because the hypervisor is entirely unaware of guest userspace
> + * preemption, it cannot guarantee that per-CPU pvclock time
> + * info is updated if the underlying CPU changes or that that
> + * version is increased whenever underlying CPU changes.
> *
> + * On KVM, we are guaranteed that pvti updates for any vCPU are
> + * atomic as seen by *all* vCPUs. This is an even stronger
> + * guarantee than we get with a normal seqlock.
> + *
> + * On Xen, we don't appear to have that guarantee, but Xen still
> + * supplies a valid seqlock using the version field.
> +
> + * We only do pvclock vdso timing at all if
> + * PVCLOCK_TSC_STABLE_BIT is set, and we interpret that bit to
> + * mean that all vCPUs have matching pvti and that the TSC is
> + * synced, so we can just look at vCPU 0's pvti.
> */
> - do {
> - cpu = __getcpu() & VGETCPU_CPU_MASK;
> - /* TODO: We can put vcpu id into higher bits of pvti.version.
> - * This will save a couple of cycles by getting rid of
> - * __getcpu() calls (Gleb).
> - */
> -
> - pvti = get_pvti(cpu);
> -
> - version = __pvclock_read_cycles(&pvti->pvti, &ret, &flags);
> -
> - /*
> - * Test we're still on the cpu as well as the version.
> - * We could have been migrated just after the first
> - * vgetcpu but before fetching the version, so we
> - * wouldn't notice a version change.
> - */
> - cpu1 = __getcpu() & VGETCPU_CPU_MASK;
> - } while (unlikely(cpu != cpu1 ||
> - (pvti->pvti.version & 1) ||
> - pvti->pvti.version != version));
> -
> - if (unlikely(!(flags & PVCLOCK_TSC_STABLE_BIT)))
> +
> + if (unlikely(!(pvti->flags & PVCLOCK_TSC_STABLE_BIT))) {
> *mode = VCLOCK_NONE;
> + return 0;
> + }
> +
> + do {
> + version = pvti->version;
> +
> + /* This is also a read barrier, so we'll read version first. */
> + tsc = rdtsc_ordered();
> +
> + pvti_tsc_to_system_mul = pvti->tsc_to_system_mul;
> + pvti_tsc_shift = pvti->tsc_shift;
> + pvti_system_time = pvti->system_time;
> + pvti_tsc = pvti->tsc_timestamp;
> +
> + /* Make sure that the version double-check is last. */
> + smp_rmb();
> + } while (unlikely((version & 1) || version != pvti->version));
> +
> + delta = tsc - pvti_tsc;
> + ret = pvti_system_time +
> + pvclock_scale_delta(delta, pvti_tsc_to_system_mul,
> + pvti_tsc_shift);
>
> /* refer to tsc.c read_tsc() comment for rationale */
> last = gtod->cycle_last;
>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
next prev parent reply other threads:[~2015-12-10 9:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 23:12 [PATCH 0/5] x86: KVM vdso and clock improvements Andy Lutomirski
2015-12-09 23:12 ` [PATCH 1/5] x86/kvm: On KVM re-enable (e.g. after suspend), update clocks Andy Lutomirski
2015-12-14 8:16 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2015-12-14 10:18 ` Paolo Bonzini
2016-03-16 22:06 ` [PATCH 1/5] " Radim Krcmar
2016-03-16 22:15 ` Andy Lutomirski
2016-03-16 22:59 ` Radim Krcmar
2016-03-16 23:07 ` Andy Lutomirski
2016-03-17 15:10 ` Radim Krcmar
2016-03-17 18:22 ` Andy Lutomirski
2016-03-17 19:58 ` Radim Krcmar
2015-12-09 23:12 ` [PATCH 2/5] x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader Andy Lutomirski
2015-12-10 9:09 ` Paolo Bonzini [this message]
2015-12-11 7:52 ` Ingo Molnar
2015-12-11 8:42 ` Paolo Bonzini
2015-12-11 18:03 ` Andy Lutomirski
2015-12-14 8:16 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2015-12-09 23:12 ` [PATCH 3/5] x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap Andy Lutomirski
2015-12-10 9:09 ` Paolo Bonzini
2015-12-14 8:17 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2015-12-09 23:12 ` [PATCH 4/5] x86/vdso: Remove pvclock fixmap machinery Andy Lutomirski
2015-12-10 9:09 ` Paolo Bonzini
2015-12-11 8:06 ` [PATCH] x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog() Ingo Molnar
2015-12-11 17:33 ` Andy Lutomirski
2015-12-14 8:17 ` [tip:x86/asm] x86/vdso: Remove pvclock fixmap machinery tip-bot for Andy Lutomirski
2015-12-09 23:12 ` [PATCH 5/5] x86/vdso: Enable vdso pvclock access on all vdso variants Andy Lutomirski
2015-12-10 9:10 ` Paolo Bonzini
2015-12-14 8:17 ` [tip:x86/asm] " tip-bot for Andy Lutomirski
2015-12-11 3:21 ` [PATCH 0/5] x86: KVM vdso and clock improvements Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56694153.7020309@redhat.com \
--to=pbonzini@redhat.com \
--cc=agraf@suse.de \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=luto@kernel.org \
--cc=mtosatti@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).