From: Mike Looijmans <mike.looijmans@topic.nl>
To: <linux-usb@vger.kernel.org>
Cc: <balbi@ti.com>, <gregkh@linuxfoundation.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] usb: gadget: ether: Allow changing the MTU
Date: Fri, 11 Dec 2015 11:47:18 +0100 [thread overview]
Message-ID: <566AA9B6.3010108@topic.nl> (raw)
In-Reply-To: <1448882303-6658-1-git-send-email-mike.looijmans@topic.nl>
Just a "ping" reminder, I'd like to inquire about the status of this patch...
On 30-11-15 12:18, Mike Looijmans wrote:
> The gadget ethernet driver supports changing the MTU, but only allows this
> when the USB cable is removed. The comment indicates that this is because
> the "peer won't know". Even if the network link is still down and only the
> USB link is established, the driver won't allow the change.
>
> Other network interfaces allow changing the MTU any time, and don't force
> the link to be disabled. This makes perfect sense, because in order to be
> able to negotiate the MTU, the link needs to be up.
>
> Remove the restriction so that it is now actually possible to change the
> MTU (e.g. using "ifconfig usb0 mtu 15000") without having to manually pull
> the plug or change the driver's default setting.
>
> This is especially important after commit bba787a860fa
> ("usb: gadget: ether: Allow jumbo frames")
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> v2: Fix commit reference (checkpatch) and unused variable 'dev' (kbuild test robot)
>
> drivers/usb/gadget/function/u_ether.c | 18 ++++--------------
> 1 file changed, 4 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
> index 6554322..637809e 100644
> --- a/drivers/usb/gadget/function/u_ether.c
> +++ b/drivers/usb/gadget/function/u_ether.c
> @@ -143,21 +143,11 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
>
> static int ueth_change_mtu(struct net_device *net, int new_mtu)
> {
> - struct eth_dev *dev = netdev_priv(net);
> - unsigned long flags;
> - int status = 0;
> + if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
> + return -ERANGE;
> + net->mtu = new_mtu;
>
> - /* don't change MTU on "live" link (peer won't know) */
> - spin_lock_irqsave(&dev->lock, flags);
> - if (dev->port_usb)
> - status = -EBUSY;
> - else if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
> - status = -ERANGE;
> - else
> - net->mtu = new_mtu;
> - spin_unlock_irqrestore(&dev->lock, flags);
> -
> - return status;
> + return 0;
> }
>
> static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
>
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
Telefax: +31 (0) 499 33 69 70
E-mail: mike.looijmans@topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
next prev parent reply other threads:[~2015-12-11 10:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 11:18 [PATCH v2] usb: gadget: ether: Allow changing the MTU Mike Looijmans
2015-12-11 10:47 ` Mike Looijmans [this message]
2015-12-16 16:05 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=566AA9B6.3010108@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox