[PATCH] clk:gcc-msm8916: add missing mss_q6_bimc_axi clock

Srinivas Kandagatla
2015-12-12T15:39:16Z

This clock is required for loading the qdsp firmware.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
drivers/clk/qcom/gcc-msm8916.c | 18 ++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8916.h | 1 +
2 files changed, 19 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index e3bf09d..1ec5a27 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -2590,6 +2590,23 @@ static struct clk_branch gcc_mss_cfg_ahb_clk = {
},
};

+static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
+ .halt_reg = 0x49004,
+ .clkr = {
+ .enable_reg = 0x49004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_q6_bimc_axi_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_bfdcd_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_oxili_ahb_clk = {
.halt_reg = 0x59028,
.clkr = {
@@ -3227,6 +3244,7 @@ static struct clk_regmap *gcc_msm8916_clocks[] = {
[GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK] = &gcc_ultaudio_lpaif_sec_i2s_clk.clkr,
[GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK] = &gcc_ultaudio_lpaif_aux_i2s_clk.clkr,
[GCC_CODEC_DIGCODEC_CLK] = &gcc_codec_digcodec_clk.clkr,
+ [GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
};

static struct gdsc *gcc_msm8916_gdscs[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h
index 257e2fb..28a27a4 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8916.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h
@@ -174,6 +174,7 @@
#define GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK 157
#define GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK 158
#define GCC_CODEC_DIGCODEC_CLK 159
+#define GCC_MSS_Q6_BIMC_AXI_CLK 160

/* Indexes for GDSCs */
#define BIMC_GDSC 0
--
1.9.1