Re: [PATCH] Move the judgement of timeout into mmc_switch_status_error()

[Jaehoon Chung <jh80.chung@samsung.com>]

Hi,

Before send the patch at mailing list, you need to make the patch as mainline style.
Maybe..maintainer should not review this patch.

Refer to "Linux kernel coding style" and "submitting Patches".
Also set  your email environment. (Documentation/email-clients.txt)

Best Regards,
Jaehoon Chung

On 12/24/2015 06:13 PM, 장영진 wrote:
>>From bc1e491b29d9199f16c6e002a69f9377677b93af Mon Sep 17 00:00:00 2001
> 
> From: "yj84.jang" <yj84.jang@samsung.com>
> 
> Date: Wed, 16 Dec 2015 08:52:47 +0900
> 
> Subject: [PATCH] Move the judgement of timeout into
> mmc_switch_status_error()
> 
>  
> 
> __mmc_switch() is possible to misjudge error.
> 
>  
> 
> Although jiffies was overed timeout, 
> 
> the chance about "R1_CURRENT_STATE(status) != R1_STATE_PRG" is exists. 
> 
> In other words, Successful completion of CMD6 with timeout error.
> 
>  
> 
> Kernel expects failure of __mmc_switch,
> 
> but card is completed CMD6 in this case.
> 
> It makes mismatch status between mmc subsystem and mmc card.
> 
>  
> 
> Especially, in case of partition switch,
> 
> If timeout occurs with normal status of CMD13 response unfortunatley, 
> 
> "main_md->curr" will not be set, even card switched successfully.
> 
>  
> 
> Checking state of mmc card is needed when judging an timeout error, 
> 
> if it is just timeout or timeout with error.
> 
>  
> 
> Signed-off-by: yj84.jang <yj84.jang@samsung.com>
> 
> ---
> 
> drivers/mmc/core/mmc_ops.c |    5 +++--
> 
> 1 file changed, 3 insertions(+), 2 deletions(-)
> 
>  
> 
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> 
> index 1f44426..033f475 100644
> 
> --- a/drivers/mmc/core/mmc_ops.c
> 
> +++ b/drivers/mmc/core/mmc_ops.c
> 
> @@ -456,6 +456,8 @@ int mmc_switch_status_error(struct mmc_host *host, u32
> status)
> 
>                     if (status & R1_SPI_ILLEGAL_COMMAND)
> 
>                                return -EBADMSG;
> 
>          } else {
> 
> +                   if (R1_CURRENT_STATE(status) == R1_STATE_PRG)
> 
> +                              return -ETIMEDOUT;
> 
>                     if (status & 0xFDFFA000)
> 
>                                pr_warn("%s: unexpected status %#x after
> switch\n",
> 
>                                          mmc_hostname(host), status);
> 
> @@ -568,8 +570,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8
> index, u8 value,
> 
>                     if (time_after(jiffies, timeout)) {
> 
>                                pr_err("%s: Card stuck in programming state!
> %s\n",
> 
>                                          mmc_hostname(host), __func__);
> 
> -                               err = -ETIMEDOUT;
> 
> -                               goto out;
> 
> +                              break;
> 
>                     }
> 
>          } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
> 
>  
>