public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stas Sergeev <stsp@list.ru>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: Q: bad routing table cache entries
Date: Mon, 28 Dec 2015 18:26:41 +0300	[thread overview]
Message-ID: <568154B1.3060901@list.ru> (raw)

Hello.

I was hitting a strange problem when some hosts
suddenly stops responding until reboot. ping to these
host gives "Destination Host Unreachable". After the
initial confusion, I've finally got to
ip route get
and got something quite strange.


Example for GOOD address (the one that I can ping):

ip route get 91.189.89.237
91.189.89.237 via 192.168.8.1 dev eth0  src 192.168.10.202
    cache


Example for BAD address (the one that stopped responding):

ip route get 91.189.89.238
91.189.89.238 via 192.168.0.1 dev eth0  src 192.168.10.202
    cache <redirected>


Two things differ: the <redirected> mark appears, and the
gateway changed from 192.168.8.1 to 192.168.0.1.
Now, 192.168.0.1 is also a valid gateway, but it is outside
of the network mask for the eth0 interface:

ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:50:43:00:0b:e0
          inet addr:192.168.10.202  Bcast:192.168.11.255  Mask:255.255.252.0


As a result, this route simply doesn't work.
I checked with tcpdump - the icmp packets do not even go
to eth0 - they instead can be captured on lo interface for
some reason.

So my question is: why does linux allow an invalid redirect
entries? Is it a problem with my setup, or some kernel bug,
or some router setup problem? Where should I look into, to
nail this down?

                 reply	other threads:[~2015-12-28 15:26 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=568154B1.3060901@list.ru \
    --to=stsp@list.ru \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox