* [PATCH] arm: dts: zynq: Add MicroZed board support
@ 2016-01-12 5:53 Jagan Teki
2016-01-12 7:33 ` Moritz Fischer
2016-01-12 10:43 ` Michal Simek
0 siblings, 2 replies; 5+ messages in thread
From: Jagan Teki @ 2016-01-12 5:53 UTC (permalink / raw)
To: linux-kernel; +Cc: devicetree, Jagan Teki, Soren Brinkmann, Michal Simek
Added basic dts support for MicroZed board.
Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-microzed.dts | 45 +++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..9eb52fa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += \
+ zynq-microzed.dtb \
zynq-parallella.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
new file mode 100644
index 0000000..a8c7d2b
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq MicroZED Development Board";
+ compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] arm: dts: zynq: Add MicroZed board support
2016-01-12 5:53 [PATCH] arm: dts: zynq: Add MicroZed board support Jagan Teki
@ 2016-01-12 7:33 ` Moritz Fischer
2016-01-12 10:43 ` Michal Simek
1 sibling, 0 replies; 5+ messages in thread
From: Moritz Fischer @ 2016-01-12 7:33 UTC (permalink / raw)
To: Jagan Teki
Cc: Linux Kernel Mailing List, Devicetree List, Soren Brinkmann,
Michal Simek
Hi Jagan,
On Mon, Jan 11, 2016 at 9:53 PM, Jagan Teki <jteki@openedev.com> wrote:
> Added basic dts support for MicroZed board.
>
> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
Feel free to add a Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Cheers,
Moritz
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm: dts: zynq: Add MicroZed board support
2016-01-12 5:53 [PATCH] arm: dts: zynq: Add MicroZed board support Jagan Teki
2016-01-12 7:33 ` Moritz Fischer
@ 2016-01-12 10:43 ` Michal Simek
2016-01-12 10:49 ` Jagan Teki
1 sibling, 1 reply; 5+ messages in thread
From: Michal Simek @ 2016-01-12 10:43 UTC (permalink / raw)
To: Jagan Teki, linux-kernel; +Cc: devicetree, Soren Brinkmann, Michal Simek
On 12.1.2016 06:53, Jagan Teki wrote:
> Added basic dts support for MicroZed board.
>
> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/zynq-microzed.dts | 45 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 46 insertions(+)
> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..9eb52fa 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
> wm8750-apc8750.dtb \
> wm8850-w70v2.dtb
> dtb-$(CONFIG_ARCH_ZYNQ) += \
> + zynq-microzed.dtb \
> zynq-parallella.dtb \
> zynq-zc702.dtb \
> zynq-zc706.dtb \
> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
> new file mode 100644
> index 0000000..a8c7d2b
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-microzed.dts
> @@ -0,0 +1,45 @@
> +/*
> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> + model = "Zynq MicroZED Development Board";
> + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
> +
> + aliases {
> + serial0 = &uart1;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000>;
> + };
> +
> + chosen {
> + bootargs = "earlyprintk";
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&clkc {
> + ps-clk-frequency = <33333333>;
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
>
I would prefer to have full description of this board instead of partial
one. In U-Boot there is also qspi enabled. Board has also USB and
ethernet that's why all of these should be enabled and tested.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] arm: dts: zynq: Add MicroZed board support
2016-01-12 10:43 ` Michal Simek
@ 2016-01-12 10:49 ` Jagan Teki
2016-01-12 11:47 ` Michal Simek
0 siblings, 1 reply; 5+ messages in thread
From: Jagan Teki @ 2016-01-12 10:49 UTC (permalink / raw)
To: Michal Simek, linux-kernel; +Cc: devicetree, Soren Brinkmann
On Tuesday 12 January 2016 04:13 PM, Michal Simek wrote:
> On 12.1.2016 06:53, Jagan Teki wrote:
>> Added basic dts support for MicroZed board.
>>
>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Cc: Michal Simek <michal.simek@xilinx.com>
>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/zynq-microzed.dts | 45 +++++++++++++++++++++++++++++++++++++
>> 2 files changed, 46 insertions(+)
>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 30bbc37..9eb52fa 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>> wm8750-apc8750.dtb \
>> wm8850-w70v2.dtb
>> dtb-$(CONFIG_ARCH_ZYNQ) += \
>> + zynq-microzed.dtb \
>> zynq-parallella.dtb \
>> zynq-zc702.dtb \
>> zynq-zc706.dtb \
>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>> new file mode 100644
>> index 0000000..a8c7d2b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>> @@ -0,0 +1,45 @@
>> +/*
>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +/dts-v1/;
>> +/include/ "zynq-7000.dtsi"
>> +
>> +/ {
>> + model = "Zynq MicroZED Development Board";
>> + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
>> +
>> + aliases {
>> + serial0 = &uart1;
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x0 0x40000000>;
>> + };
>> +
>> + chosen {
>> + bootargs = "earlyprintk";
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&clkc {
>> + ps-clk-frequency = <33333333>;
>> +};
>> +
>> +&sdhci0 {
>> + status = "okay";
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>>
>
> I would prefer to have full description of this board instead of partial
> one. In U-Boot there is also qspi enabled. Board has also USB and
> ethernet that's why all of these should be enabled and tested.
I have verified what all I added like uart, mmc ie why I described as
basic support.
May be we can move this first and rest will add in future like USB and
Ethernet. For qspi the driver is not mainlined yet.
--
Jagan
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] arm: dts: zynq: Add MicroZed board support
2016-01-12 10:49 ` Jagan Teki
@ 2016-01-12 11:47 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2016-01-12 11:47 UTC (permalink / raw)
To: Jagan Teki, Michal Simek, linux-kernel; +Cc: devicetree, Soren Brinkmann
On 12.1.2016 11:49, Jagan Teki wrote:
> On Tuesday 12 January 2016 04:13 PM, Michal Simek wrote:
>> On 12.1.2016 06:53, Jagan Teki wrote:
>>> Added basic dts support for MicroZed board.
>>>
>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/zynq-microzed.dts | 45
>>> +++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 46 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 30bbc37..9eb52fa 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>> wm8750-apc8750.dtb \
>>> wm8850-w70v2.dtb
>>> dtb-$(CONFIG_ARCH_ZYNQ) += \
>>> + zynq-microzed.dtb \
>>> zynq-parallella.dtb \
>>> zynq-zc702.dtb \
>>> zynq-zc706.dtb \
>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts
>>> b/arch/arm/boot/dts/zynq-microzed.dts
>>> new file mode 100644
>>> index 0000000..a8c7d2b
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>> @@ -0,0 +1,45 @@
>>> +/*
>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>> + *
>>> + * This software is licensed under the terms of the GNU General Public
>>> + * License version 2, as published by the Free Software Foundation, and
>>> + * may be copied, distributed, and modified under those terms.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +/dts-v1/;
>>> +/include/ "zynq-7000.dtsi"
>>> +
>>> +/ {
>>> + model = "Zynq MicroZED Development Board";
>>> + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
>>> +
>>> + aliases {
>>> + serial0 = &uart1;
>>> + };
>>> +
>>> + memory {
>>> + device_type = "memory";
>>> + reg = <0x0 0x40000000>;
>>> + };
>>> +
>>> + chosen {
>>> + bootargs = "earlyprintk";
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +};
>>> +
>>> +&clkc {
>>> + ps-clk-frequency = <33333333>;
>>> +};
>>> +
>>> +&sdhci0 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart1 {
>>> + status = "okay";
>>> +};
>>>
>>
>> I would prefer to have full description of this board instead of partial
>> one. In U-Boot there is also qspi enabled. Board has also USB and
>> ethernet that's why all of these should be enabled and tested.
>
> I have verified what all I added like uart, mmc ie why I described as
> basic support.
>
> May be we can move this first and rest will add in future like USB and
> Ethernet. For qspi the driver is not mainlined yet.
Adding USB, ethernet should be quite simple. It means if you have the
board please test it and send v2 with that.
Hopefully both 7010 and 7020 microzed boards are the same.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-01-12 12:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-12 5:53 [PATCH] arm: dts: zynq: Add MicroZed board support Jagan Teki
2016-01-12 7:33 ` Moritz Fischer
2016-01-12 10:43 ` Michal Simek
2016-01-12 10:49 ` Jagan Teki
2016-01-12 11:47 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox