Re: [PATCH v2 1/3] clk: s2mps11: allocate only one structure for clock init

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On 19.01.2016 17:52, Andi Shyti wrote:
> The driver allocates three structures for three different clock
> types. They are quite similar and in the clock init data they
> differ only by the name. Only one of these structures is used,
> while the others lie unused in the memory.
> 
> The clock's name, though, is not such a meaningful information
> and by assigning the same name to the initial data we can avoid
> over allocation. The common name chosen will be s2mps11,
> coherently with the device driver name, instead of the clock
> device.
> 
> Therefore, remove the structures associated to s2mps13 and
> s2mps14 and use only the one referred to s2mps11 for all kind of
> clocks.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/clk/clk-s2mps11.c | 56 ++++++-----------------------------------------
>  1 file changed, 7 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index d266299..22d4df2 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -99,6 +99,7 @@ static struct clk_ops s2mps11_clk_ops = {
>  	.recalc_rate	= s2mps11_clk_recalc_rate,
>  };
>  
> +/* This s2mps11_clks_init tructure is common to s2mps11, s2mps13 and s2mps14 */
>  static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>  	[S2MPS11_CLK_AP] = {
>  		.name = "s2mps11_ap",
> @@ -117,43 +118,11 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>  	},
>  };
>  
> -static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
> -	[S2MPS11_CLK_AP] = {
> -		.name = "s2mps13_ap",
> -		.ops = &s2mps11_clk_ops,
> -		.flags = CLK_IS_ROOT,
> -	},
> -	[S2MPS11_CLK_CP] = {
> -		.name = "s2mps13_cp",
> -		.ops = &s2mps11_clk_ops,
> -		.flags = CLK_IS_ROOT,
> -	},
> -	[S2MPS11_CLK_BT] = {
> -		.name = "s2mps13_bt",
> -		.ops = &s2mps11_clk_ops,
> -		.flags = CLK_IS_ROOT,
> -	},
> -};
> -
> -static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
> -	[S2MPS11_CLK_AP] = {
> -		.name = "s2mps14_ap",
> -		.ops = &s2mps11_clk_ops,
> -		.flags = CLK_IS_ROOT,
> -	},
> -	[S2MPS11_CLK_BT] = {
> -		.name = "s2mps14_bt",
> -		.ops = &s2mps11_clk_ops,
> -		.flags = CLK_IS_ROOT,
> -	},
> -};
> -
>  static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
>  		struct clk_init_data *clks_init)
>  {
>  	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>  	struct device_node *clk_np;
> -	int i;
>  
>  	if (!iodev->dev->of_node)
>  		return ERR_PTR(-EINVAL);
> @@ -164,13 +133,6 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> -		if (!clks_init[i].name)
> -			continue; /* Skip clocks not present in some devices */
> -		of_property_read_string_index(clk_np, "clock-output-names", i,
> -				&clks_init[i].name);
> -	}
> -

The commit description does not mention anything about removal of
"clock-output-names". Why you are removing this?

Best regards,
Krzysztof

>  	return clk_np;
>  }
>  
> @@ -179,8 +141,8 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>  	struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
>  	unsigned int s2mps11_reg;
> -	struct clk_init_data *clks_init;
>  	int i, ret = 0;
> +	enum sec_device_type hwid = platform_get_device_id(pdev)->driver_data;
>  
>  	s2mps11_clks = devm_kcalloc(&pdev->dev, S2MPS11_CLKS_NUM,
>  				sizeof(*s2mps11_clk), GFP_KERNEL);
> @@ -194,22 +156,18 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  	if (!clk_table)
>  		return -ENOMEM;
>  
> -	switch(platform_get_device_id(pdev)->driver_data) {
> +	switch (hwid) {
>  	case S2MPS11X:
>  		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
> -		clks_init = s2mps11_clks_init;
>  		break;
>  	case S2MPS13X:
>  		s2mps11_reg = S2MPS13_REG_RTCCTRL;
> -		clks_init = s2mps13_clks_init;
>  		break;
>  	case S2MPS14X:
>  		s2mps11_reg = S2MPS14_REG_RTCCTRL;
> -		clks_init = s2mps14_clks_init;
>  		break;
>  	case S5M8767X:
>  		s2mps11_reg = S5M8767_REG_CTRL1;
> -		clks_init = s2mps11_clks_init;
>  		break;
>  	default:
>  		dev_err(&pdev->dev, "Invalid device type\n");
> @@ -217,15 +175,15 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Store clocks of_node in first element of s2mps11_clks array */
> -	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
> +	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, s2mps11_clks_init);
>  	if (IS_ERR(s2mps11_clks->clk_np))
>  		return PTR_ERR(s2mps11_clks->clk_np);
>  
>  	for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
> -		if (!clks_init[i].name)
> +		if (i == S2MPS11_CLK_CP && hwid == S2MPS14X)
>  			continue; /* Skip clocks not present in some devices */
>  		s2mps11_clk->iodev = iodev;
> -		s2mps11_clk->hw.init = &clks_init[i];
> +		s2mps11_clk->hw.init = &s2mps11_clks_init[i];
>  		s2mps11_clk->mask = 1 << i;
>  		s2mps11_clk->reg = s2mps11_reg;
>  
> @@ -248,7 +206,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>  
>  	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
>  		/* Skip clocks not present on S2MPS14 */
> -		if (!clks_init[i].name)
> +		if (i == S2MPS11_CLK_CP && hwid == S2MPS14X)
>  			continue;
>  		clk_table[i] = s2mps11_clks[i].clk;
>  	}
>