Re: [PATCH v2 03/10] rtc: max77686: Use usleep_range() instead of msleep()

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On 22.01.2016 05:23, Javier Martinez Canillas wrote:
> Documentation/timers/timers-howto.txt suggest to use usleep_range()
> instead of msleep() for small msec (1ms - 20ms) since msleep() will
> often sleep for 20ms for any value in that range.
> 
> This is fine in this case since 16ms is the _minimum_ delay required
> by max77686 for an RTC update but by using usleep_range() instead of
> msleep(), the driver can support other RTC IP blocks with a shorter
> minimum delay (i.e: in the range of usecs instead of msecs).
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> ---
> 
> Changes in v2:
> - Add Krzysztof Kozlowski's Reviewed-by tag to patch #3.
> - Fix typo error in changelog. Suggested by Krzysztof Kozlowski.
> 
>  drivers/rtc/rtc-max77686.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Tested on Trats2 board with max77686:
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof