From: Javier Martinez Canillas <javier@osg.samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-kernel@vger.kernel.org
Cc: Kukjin Kim <kgene@kernel.org>,
rtc-linux@googlegroups.com, Chanwoo Choi <cw00.choi@samsung.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v2 04/10] rtc: max77686: Use a driver data struct instead hard-coded values
Date: Thu, 21 Jan 2016 22:48:53 -0300 [thread overview]
Message-ID: <56A18A85.5040601@osg.samsung.com> (raw)
In-Reply-To: <56A17F1A.8020402@samsung.com>
Hello Krzysztof,
On 01/21/2016 10:00 PM, Krzysztof Kozlowski wrote:
> On 22.01.2016 05:23, Javier Martinez Canillas wrote:
>> The driver has some hard-coded values such as the minimum delay needed
>> before a RTC update or the mask used for the sec/min/hour/etc registers.
>>
>> Use a data structure that contains these values and pass as driver data
>> using the platform device ID table for each device.
>>
>> This allows to make the driver's ops callbacks more generic so other RTC
>> that are similar but don't have the same values can also be supported.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>>
>> ---
>>
>> Changes in v2:
>> - Add a max77686 prefix to rtc_driver_data. Suggested by Krzysztof Kozlowski.
>> - Comment about the .delay and .mask fields. Suggested by Krzysztof Kozlowski.
>> - Change .mask type to u8. Suggested by Krzysztof Kozlowski.
>> - Make .drv_data field const. Suggested by Krzysztof Kozlowski.
>> - Don't cast to drop const on .drv_data asign. Suggested by Krzysztof Kozlowski.
>> - Use platform_get_device_id() macro. Suggested by Krzysztof Kozlowski.
>>
>> drivers/rtc/rtc-max77686.c | 51 ++++++++++++++++++++++++++++++----------------
>> 1 file changed, 34 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
>> index 71ef2240b3fc..16033a2c2756 100644
>> --- a/drivers/rtc/rtc-max77686.c
>> +++ b/drivers/rtc/rtc-max77686.c
>> @@ -41,8 +41,6 @@
>> #define ALARM_ENABLE_SHIFT 7
>> #define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT)
>>
>> -#define MAX77686_RTC_UPDATE_DELAY 16000
>> -
>> enum {
>> RTC_SEC = 0,
>> RTC_MIN,
>> @@ -54,6 +52,13 @@ enum {
>> RTC_NR_TIME
>> };
>>
>> +struct max77686_rtc_driver_data {
>> + /* Minimum delay needed for a RTC update */
>> + unsigned long delay;
>> + /* Mask used to read RTC registers value */
>> + u8 mask;
>> +};
>> +
>> struct max77686_rtc_info {
>> struct device *dev;
>> struct max77686_dev *max77686;
>> @@ -63,6 +68,8 @@ struct max77686_rtc_info {
>>
>> struct regmap *regmap;
>>
>> + const struct max77686_rtc_driver_data *drv_data;
>> +
>> int virq;
>> int rtc_24hr_mode;
>> };
>> @@ -72,12 +79,19 @@ enum MAX77686_RTC_OP {
>> MAX77686_RTC_READ,
>> };
>>
>> +static const struct max77686_rtc_driver_data max77686_drv_data = {
>> + .delay = 1600,
>
> 16000.
> wakealarm does not work with 1600.
>
>
Sigh, sorry for the silly typo error...
>> + .mask = 0x7f,
>> +};
>> +
>> static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
>> - int rtc_24hr_mode)
>> + struct max77686_rtc_info *info)
>> {
>> - tm->tm_sec = data[RTC_SEC] & 0x7f;
>> - tm->tm_min = data[RTC_MIN] & 0x7f;
>> - if (rtc_24hr_mode)
>> + int mask = info->drv_data->mask;
>
> u8 mask
>
Right, I forgot to change this when used u8 for the mask field.
> Best regards,
> Krzysztof
>
If you don't mind I'll wait a couple of days before posting a v3
otherwise I may be re-spining too fast and spamming other people
that didn't have time to look at the series yet.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
next prev parent reply other threads:[~2016-01-22 1:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 20:23 [PATCH v2 00/10] rtc: max77686: Extend driver and add max77802 support Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 01/10] rtc: max77686: Fix max77686_rtc_read_alarm() return value Javier Martinez Canillas
2016-01-22 0:51 ` Krzysztof Kozlowski
2016-01-22 9:35 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 02/10] rtc: max77686: Use ARRAY_SIZE() instead of current array length Javier Martinez Canillas
2016-01-22 0:53 ` Krzysztof Kozlowski
2016-01-22 9:39 ` Laxman Dewangan
2016-01-22 11:43 ` Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 03/10] rtc: max77686: Use usleep_range() instead of msleep() Javier Martinez Canillas
2016-01-22 1:02 ` Krzysztof Kozlowski
2016-01-22 9:41 ` Laxman Dewangan
2016-01-22 12:05 ` Javier Martinez Canillas
2016-01-25 11:17 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 04/10] rtc: max77686: Use a driver data struct instead hard-coded values Javier Martinez Canillas
2016-01-22 1:00 ` Krzysztof Kozlowski
2016-01-22 1:48 ` Javier Martinez Canillas [this message]
2016-01-22 9:50 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 05/10] rtc: max77686: Add an indirection level to access RTC registers Javier Martinez Canillas
2016-01-22 9:52 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 06/10] rtc: max77686: Add max77802 support Javier Martinez Canillas
2016-01-22 9:54 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 07/10] rtc: max77686: Use dev_warn() instead of pr_warn() Javier Martinez Canillas
2016-01-22 9:56 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 08/10] rtc: Remove Maxim 77802 driver Javier Martinez Canillas
2016-01-22 9:59 ` Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 09/10] ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 10/10] ARM: multi_v7_defconfig: " Javier Martinez Canillas
2016-01-22 9:57 ` Laxman Dewangan
2016-01-22 12:09 ` Javier Martinez Canillas
2016-01-25 16:06 ` [PATCH v2 00/10] rtc: max77686: Extend driver and add max77802 support Alexandre Belloni
2016-01-25 23:45 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A18A85.5040601@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=cw00.choi@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox