From: Chen Feng <puck.chen@hisilicon.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: <kong.kongxinwei@hisilicon.com>, <w.f@huawei.com>,
<linux-kernel@vger.kernel.org>, <lgirdwood@gmail.com>,
<broonie@kernel.org>, <yudongbin@hisilicon.com>,
<saberlily.xia@hisilicon.com>, <suzhuangluan@hisilicon.com>,
<xuyiping@hisilicon.com>, <z.liuxinliang@hisilicon.com>,
<puck.chenfeng@gmail.com>, <weidong2@hisilicon.com>,
<puck.chen@foxmail.com>, <qijiwen@hisilicon.com>,
<peter.panshilin@hisilicon.com>, <dan.zhao@hisilicon.com>,
<linuxarm@huawei.com>, <haojian.zhuang@linaro.org>
Subject: Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
Date: Sun, 14 Feb 2016 09:38:42 +0800 [thread overview]
Message-ID: <56BFDAA2.2050105@hisilicon.com> (raw)
In-Reply-To: <20160211165935.GD20693@x1>
Thanks for your review.
On 2016/2/12 0:59, Lee Jones wrote:
> On Mon, 01 Feb 2016, Chen Feng wrote:
>
>> DT bindings for hisilicon hi655x MFD PMIC chip.
>>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
>> Signed-off-by: Fei Wang <w.f@huawei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>> ---
>> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> new file mode 100644
>> index 0000000..5edc310
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> @@ -0,0 +1,27 @@
>> +Hisilicon hi655x Power Management Integrated Circuit (PMIC)
>> +
>> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>> +We can use memory-mapped I/O to communicate.
>> +
>> ++----------------+ +-------------+
>> +| | | |
>> +| Hi6220 | SSI bus | Hi655x |
>> +| |-------------| |
>> +| |(REGMAP_MMIO)| |
>> ++----------------+ +-------------+
>> +
>> +Required properties:
>> +- compatible: Should be "hisilicon,hi655x-pmic"
>> +- reg: Base address of PMIC on hi6220 soc
>
> s/hi6220 soc/Hi6220 SoC/
>
>> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
>> +- pmic-gpios: The gpio used by PMIC irq.
>
> s/gpio/GPIO/
> s/irq/IRQ/
>
I will change this and send a new V8 version.
> These are always easier to read in this format:
>
> - compatible: Should be "hisilicon,hi655x-pmic"
> - reg: Base address of PMIC on hi6220 soc
> - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
> - pmic-gpios: The gpio used by PMIC irq.
>
>> +Example:
>> + pmic: pmic@f8000000 {
>> + compatible = "hisilicon,hi655x-pmic";
>> + reg = <0x0 0xf8000000 0x0 0x1000>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> + }
>
next prev parent reply other threads:[~2016-02-14 1:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 9:16 [RESEND v7 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng
2016-02-01 9:16 ` [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC Chen Feng
2016-02-11 16:59 ` Lee Jones
2016-02-14 1:38 ` Chen Feng [this message]
2016-02-01 9:16 ` [RESEND v7 2/5] regulator: hi655x: Document for hi655x regulator Chen Feng
2016-02-01 9:16 ` [RESEND v7 3/5] mfd: hi655x: Add MFD driver for hi655x Chen Feng
2016-02-11 17:00 ` Lee Jones
2016-02-01 9:16 ` [RESEND v7 4/5] regulator: hi655x: enable regulator for hi655x PMIC Chen Feng
2016-02-01 9:16 ` [RESEND v7 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node Chen Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BFDAA2.2050105@hisilicon.com \
--to=puck.chen@hisilicon.com \
--cc=broonie@kernel.org \
--cc=dan.zhao@hisilicon.com \
--cc=haojian.zhuang@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=peter.panshilin@hisilicon.com \
--cc=puck.chen@foxmail.com \
--cc=puck.chenfeng@gmail.com \
--cc=qijiwen@hisilicon.com \
--cc=saberlily.xia@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=w.f@huawei.com \
--cc=weidong2@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=yudongbin@hisilicon.com \
--cc=z.liuxinliang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).