Re: [PATCH 3/6] hisi_sas: use slot abort in v1 hw

[Hannes Reinecke <hare@suse.de>]

On 02/16/2016 05:13 PM, John Garry wrote:
> On 16/02/2016 15:31, Hannes Reinecke wrote:
>> On 02/16/2016 01:22 PM, John Garry wrote:
>>> When TRANS_TX_CREDIT_TIMEOUT_ERR or
>>> TRANS_TX_CLOSE_NORMAL_ERR errors occur for a
>>> command, the command should be re-attempted.
>>>
>>> Signed-off-by: John Garry <john.garry@huawei.com>
>>> ---
>>>   drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 22 ++++++++++++++++++----
>>>   1 file changed, 18 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
>>> b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
>>> index ce5f65d..34f71a1c 100644
>>> --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
>>> +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
>>> @@ -1118,9 +1118,8 @@ static int prep_ssp_v1_hw(struct hisi_hba
>>> *hisi_hba,
>>>   }
>>>
>>>   /* by default, task resp is complete */
>>> -static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
>>> -               struct sas_task *task,
>>> -               struct hisi_sas_slot *slot)
>>> +static void slot_err_v1_hw(struct hisi_hba *hisi_hba, struct
>>> sas_task *task,
>>> +               struct hisi_sas_slot *slot, int *abort_slot)
>>>   {
>>>       struct task_status_struct *ts = &task->task_status;
>>>       struct hisi_sas_err_record_v1 *err_record =
>>> slot->status_buffer;
>>> @@ -1212,6 +1211,14 @@ static void slot_err_v1_hw(struct hisi_hba
>>> *hisi_hba,
>>>               ts->stat = SAS_NAK_R_ERR;
>>>               break;
>>>           }
>>> +        case TRANS_TX_CREDIT_TIMEOUT_ERR:
>>> +        case TRANS_TX_CLOSE_NORMAL_ERR:
>>> +        {
>>> +            /* This will request a retry */
>>> +            ts->stat = SAS_QUEUE_FULL;
>>> +            ++(*abort_slot);
>>> +            break;
>>> +        }
>>>           default:
>>>           {
>>>               ts->stat = SAM_STAT_CHECK_CONDITION;
>>> @@ -1317,8 +1324,14 @@ static int slot_complete_v1_hw(struct
>>> hisi_hba *hisi_hba,
>>>
>>>       if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK &&
>>>           !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) {
>>> +        int abort_slot = 0;
>>>
>>> -        slot_err_v1_hw(hisi_hba, task, slot);
>>> +        slot_err_v1_hw(hisi_hba, task, slot,  &abort_slot);
>>> +        if (unlikely(abort_slot)) {
>>> +            queue_work(hisi_hba->wq, &slot->abort_slot);
>>> +            sts = ts->stat;
>>> +            goto out_1;
>>> +        }
>>>           goto out;
>>>       }
>>>
>> What is the 'abort_slot' variable for?
>> Currently it's just a counter, no?
>> So why the weird pointer passing?
>>
>> And it does feel weird. Apparently the driver does get a message,
>> but still has to abort the command. Why?
>> Isn't the message an indicator that the command has been aborted?
>>
>> Cheers,
>>
>> Hannes
>>
> 
> I'll paste some more code for convenience and to help clarify:
> 
> static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
>                    struct hisi_sas_slot *slot, int abort)
> {
> ...
> 
>     if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK &&
>         !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) {
>         int abort_slot = 0;
> 
>         slot_err_v1_hw(hisi_hba, task, slot,  &abort_slot);
>         if (unlikely(abort_slot)) { /* check if we need to abort the
> task */
>             queue_work(hisi_hba->wq, &slot->abort_slot);
>             sts = ts->stat;
>             goto out_1;
>         }
>         goto out;
>     }
> 
>  ...
> 
> out:
>     if (sas_dev && sas_dev->running_req)
>         sas_dev->running_req--;
> 
>     hisi_sas_slot_task_free(hisi_hba, task, slot);
>     sts = ts->stat;
> 
>     if (task->task_done)
>         task->task_done(task);
> out_1:
> 
>     return sts;
> }
> 
> Variable abort_slot is really a boolean flag which can be set in
> slot_err_v1_hw(). When error TRANS_TX_CREDIT_TIMEOUT_ERR or
> TRANS_TX_CLOSE_NORMAL_ERR occurs in the slot, abort_slot is set. In
> this case we don't immediately complete the task (goto out and call
> hisi_sas_slot_task_free() and task->task_done()), but instead queue
> the task to be aborted in the device before completing (call
> queue_work() and then goto out_1).
So why not make slot_err_vi_hw() a boolean and have abort_slot as
the return value?

> When hisi_sas_slot_abort() [patch #2] runs in the workqueue for the
> task, it first aborts the task in the device with a TMF, and then
> completes the task. Finally the status (SAS_QUEUE_FULL) is passed
> back to SCSI framework, which will request a retry for the scsi
> command.
> 
> This is the method our hw people recommended to handle these types
> of errors.
> 
Ok, sure, that does explain it.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)