Re: [GIT PULL 2/2] bcm2835 changes to DT for 4.6

[Florian Fainelli <f.fainelli@gmail.com>]

On 17/02/16 18:56, Eric Anholt wrote:
> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
> 
>   Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
> 
> are available in the git repository at:
> 
>   git@github.com:anholt/linux.git bcm2835-dt-next-2016-02-17

I cannot find this branch, could you verify it is pushed and create a
tag for me to pull from instead?

Thanks!

> 
> for you to fetch changes up to 1305141d1a7254b53b35303ee84f4c4948007bd0:
> 
>   ARM: bcm2835: add bcm2835-aux-uart support to DT (2016-02-17 11:01:00 -0800)
> 
> ----------------------------------------------------------------
> This pull request covers mostly DT changes that didn't make it into
> 4.5 because required header files went through other trees, plus the
> AUX uart support this time around.
> 
> ----------------------------------------------------------------
> Alexander Aring (1):
>       ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
> 
> Lubomir Rintel (1):
>       ARM: bcm2835: dt: Add Raspberry Pi Model A
> 
> Martin Sperl (3):
>       ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
>       ARM: bcm2835: follow dt uart node-naming convention
>       ARM: bcm2835: add bcm2835-aux-uart support to DT
> 
> Remi Pommarel (1):
>       ARM: bcm2835: Add PWM clock support to the device tree
> 
>  arch/arm/boot/dts/Makefile          |  1 +
>  arch/arm/boot/dts/bcm2835-rpi-a.dts | 24 +++++++++++++++++++++
>  arch/arm/boot/dts/bcm2835-rpi.dtsi  | 16 ++++++++++++++
>  arch/arm/boot/dts/bcm283x.dtsi      | 43 +++++++++++++++++++++++++++++++++++--
>  4 files changed, 82 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/bcm2835-rpi-a.dts
> 


-- 
Florian