Re: [PATCH 5/6] dt-bindings: add documentation of rk3399 clock controller

[Jianqun Xu <jay.xu@rock-chips.com>]

Hi Rob

在 18/02/2016 22:36, Rob Herring 写道:
> On Wed, Feb 17, 2016 at 09:54:49AM +0800, jianqun.xu wrote:
>> From: Xing Zheng <zhengxing@rock-chips.com>
>>
>> Add the devicetree binding for the cru on the rk3399 which quite
>> similar structured as previous clock controllers.
>>
>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
>> ---
>>   .../bindings/clock/rockchip,rk3399-cru.txt         | 82 ++++++++++++++++++++++
>>   1 file changed, 82 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
>> new file mode 100644
>> index 0000000..07bcc6e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt
>> @@ -0,0 +1,82 @@
>> +* Rockchip RK3399 Clock and Reset Unit
>
> [...]
>
>> +Example: General Register Files
>> +
>> +	pmugrf: syscon@ff320000 {
>> +		compatible = "rockchip,rk3399-pmugrf", "syscon";
>
> Is this documented?
Since there is no documentation for rockchip grf from early SoCs, I 
think if we need to add a new devicetree documentation, such as
Documentation/devicetree/bindings/clock/rockchip,rk3399-grf.txt ?

If you agree, I will add it in next patch

>
>> +		reg = <0x0 0xff320000 0x0 0x1000>;
>> +	};
>> +
>> +	grf: syscon@ff770000 {
>> +		compatible = "rockchip,rk3399-grf", "syscon";
>
> ditto.
>
>> +		reg = <0x0 0xff770000 0x0 0x10000>;
>> +	};
>> +
>> +Example: Clock controller node:
>> +
>> +	pmucru: pmu-clock-controller@ff750000 {
>> +		compatible = "rockchip,rk3399-pmucru";
>> +		reg = <0x0 0xff750000 0x0 0x1000>;
>> +		#clock-cells = <1>;
>> +		#reset-cells = <1>;
>> +	};
>> +
>> +	cru: clock-controller@ff760000 {
>> +		compatible = "rockchip,rk3399-cru";
>> +		reg = <0x0 0xff760000 0x0 0x1000>;
>> +		rockchip,grf = <&grf>;
>> +		#clock-cells = <1>;
>> +		#reset-cells = <1>;
>> +	};
>> +
>> +Example: UART controller node that consumes the clock generated by the clock
>> +  controller:
>> +
>> +	uart0: serial@ff1a0000 {
>> +		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
>> +		reg = <0x0 0xff180000 0x0 0x100>;
>> +		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +	};
>> --
>> 1.9.1
>>
>>
>
>
>