From: Wei Xu <xuwei5@hisilicon.com>
To: Chen Feng <puck.chen@hisilicon.com>, Lee Jones <lee.jones@linaro.org>
Cc: <lgirdwood@gmail.com>, <broonie@kernel.org>,
<linux-kernel@vger.kernel.org>, <w.f@huawei.com>,
<kong.kongxinwei@hisilicon.com>, <haojian.zhuang@linaro.org>,
<suzhuangluan@hisilicon.com>, <dan.zhao@hisilicon.com>
Subject: Re: [PATCH v8 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
Date: Sat, 27 Feb 2016 16:36:41 +0800 [thread overview]
Message-ID: <56D16019.3020102@hisilicon.com> (raw)
In-Reply-To: <56C279B3.80300@hisilicon.com>
Hi Leo,
On 16/02/2016 09:21, Chen Feng wrote:
> Lee,
> Thanks for your review.
>
> On 2016/2/15 16:32, Lee Jones wrote:
>> On Sun, 14 Feb 2016, Chen Feng wrote:
>>
>>> DT bindings for hisilicon hi655x MFD PMIC chip.
>>>
>>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
>>> Signed-off-by: Fei Wang <w.f@huawei.com>
>>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>>> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>>> ---
>>> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++
>>> 1 file changed, 27 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>
>> For my own reference:
>> Acked-by: Lee Jones <lee.jones@linaro.org>
>>
>
> Will you merge this into your git-repo?
>
> git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
>
> I saw mark already merged the part of regulator into his git tree.
>
>
>
>
> Hi Wei,
>
> Could you help merge the DTS part of these patch sets.
Applied the 5th patch into the hisilicon soc tree.
Thanks!
Best Regards,
Wei
>
>>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>> new file mode 100644
>>> index 0000000..0548569
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>> @@ -0,0 +1,27 @@
>>> +Hisilicon Hi655x Power Management Integrated Circuit (PMIC)
>>> +
>>> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>>> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>>> +We can use memory-mapped I/O to communicate.
>>> +
>>> ++----------------+ +-------------+
>>> +| | | |
>>> +| Hi6220 | SSI bus | Hi655x |
>>> +| |-------------| |
>>> +| |(REGMAP_MMIO)| |
>>> ++----------------+ +-------------+
>>> +
>>> +Required properties:
>>> +- compatible: Should be "hisilicon,hi655x-pmic".
>>> +- reg: Base address of PMIC on Hi6220 SoC.
>>> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
>>> +- pmic-gpios: The GPIO used by PMIC IRQ.
>>> +
>>> +Example:
>>> + pmic: pmic@f8000000 {
>>> + compatible = "hisilicon,hi655x-pmic";
>>> + reg = <0x0 0xf8000000 0x0 0x1000>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>>> + }
>>
>
>
> .
>
next prev parent reply other threads:[~2016-02-27 8:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-14 6:29 [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng
2016-02-14 6:29 ` [PATCH v8 1/5] mfd: hi655x: Add document for mfd hi665x PMIC Chen Feng
2016-02-15 8:32 ` Lee Jones
2016-02-16 1:21 ` Chen Feng
2016-02-27 8:36 ` Wei Xu [this message]
2016-04-11 10:40 ` Lee Jones
2016-02-14 6:29 ` [PATCH v8 2/5] regulator: hi655x: Document for hi655x regulator Chen Feng
2016-02-14 6:29 ` [PATCH v8 3/5] mfd: hi655x: Add MFD driver for hi655x Chen Feng
2016-04-11 10:41 ` Lee Jones
[not found] ` <570D982C.6090307@hisilicon.com>
2016-04-19 3:25 ` Guodong Xu
2016-04-19 6:53 ` Lee Jones
2016-04-19 6:57 ` Guodong Xu
2016-05-18 3:14 ` Guodong Xu
2016-02-14 6:29 ` [PATCH v8 4/5] regulator: hi655x: enable regulator for hi655x PMIC Chen Feng
2016-02-14 6:29 ` [PATCH v8 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node Chen Feng
2016-04-11 8:14 ` [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Lee Jones
2016-04-11 8:41 ` Chen Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D16019.3020102@hisilicon.com \
--to=xuwei5@hisilicon.com \
--cc=broonie@kernel.org \
--cc=dan.zhao@hisilicon.com \
--cc=haojian.zhuang@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=puck.chen@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=w.f@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox