* [PATCH] lightnvm: do not load L2P table if not supported
@ 2016-03-02 15:21 Javier González
2016-03-02 18:53 ` Matias Bjørling
0 siblings, 1 reply; 2+ messages in thread
From: Javier González @ 2016-03-02 15:21 UTC (permalink / raw)
To: mb; +Cc: linux-kernel, linux-block, Javier González
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the
L2P table is maintained both by the host and by the device; and (ii)
full host-based, where the L2P table is uniquely maintained by the host.
The current rrpc target operates on hybrid mode.
In the advent of a new target implementing the full host-based mode, do
not assume that the L2P table must be loaded on the generic media
manager; check device properties loaded on the identify command instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
---
drivers/lightnvm/gennvm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/lightnvm/gennvm.c b/drivers/lightnvm/gennvm.c
index 42c1c2a..0625d42 100644
--- a/drivers/lightnvm/gennvm.c
+++ b/drivers/lightnvm/gennvm.c
@@ -257,6 +257,9 @@ static int gennvm_blocks_init(struct nvm_dev *dev, struct gen_nvm *gn)
}
}
+ if (!(dev->identity.dom & NVM_RSP_L2P))
+ return 0;
+
if (dev->ops->get_l2p_tbl) {
ret = dev->ops->get_l2p_tbl(dev, 0, dev->total_secs,
gennvm_block_map, dev);
--
2.5.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] lightnvm: do not load L2P table if not supported
2016-03-02 15:21 [PATCH] lightnvm: do not load L2P table if not supported Javier González
@ 2016-03-02 18:53 ` Matias Bjørling
0 siblings, 0 replies; 2+ messages in thread
From: Matias Bjørling @ 2016-03-02 18:53 UTC (permalink / raw)
To: Javier González; +Cc: linux-kernel, linux-block, Javier González
On 03/02/2016 04:21 PM, Javier González wrote:
> An Open-Channel SSD can work on two modes: (i) hybrid mode, where the
> L2P table is maintained both by the host and by the device; and (ii)
> full host-based, where the L2P table is uniquely maintained by the host.
> The current rrpc target operates on hybrid mode.
>
> In the advent of a new target implementing the full host-based mode, do
> not assume that the L2P table must be loaded on the generic media
> manager; check device properties loaded on the identify command instead.
>
> Signed-off-by: Javier González <javier@cnexlabs.com>
> ---
> drivers/lightnvm/gennvm.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/lightnvm/gennvm.c b/drivers/lightnvm/gennvm.c
> index 42c1c2a..0625d42 100644
> --- a/drivers/lightnvm/gennvm.c
> +++ b/drivers/lightnvm/gennvm.c
> @@ -257,6 +257,9 @@ static int gennvm_blocks_init(struct nvm_dev *dev, struct gen_nvm *gn)
> }
> }
>
> + if (!(dev->identity.dom & NVM_RSP_L2P))
> + return 0;
> +
> if (dev->ops->get_l2p_tbl) {
> ret = dev->ops->get_l2p_tbl(dev, 0, dev->total_secs,
> gennvm_block_map, dev);
>
Thanks, applied for 4.6.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-03-02 18:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-02 15:21 [PATCH] lightnvm: do not load L2P table if not supported Javier González
2016-03-02 18:53 ` Matias Bjørling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox