public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Caesar Wang <wxt@rock-chips.com>
To: linus.walleij@linaro.org, heiko@sntech.de
Cc: linux-gpio@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pinctrl: rockchip: add support the get_direction
Date: Mon, 14 Mar 2016 13:57:26 +0800	[thread overview]
Message-ID: <56E652C6.7030503@rock-chips.com> (raw)
In-Reply-To: <1457934266-29862-1-git-send-email-wxt@rock-chips.com>



在 2016年03月14日 13:44, Caesar Wang 写道:
> This patch adds the get_direction to support the gpio
> interface.
>
> the gpio direction is not used on rockchip platform when use the gpio
> debugfs.
>
> Tested on kylin board. (RK3036 SoCs)
> The repro steps:
> $/sys/class/gpio/
> echo 53 > export
> $/sys/class/gpio/gpio53# cat direction
> in
> In general, the gpio53 should be out value, but the direction is the
> default value 'in',  since the get_direction didn't supported in rockchip
> pinctrl.
>
> So, we should add this patch to support it.
>
> Change-Id: I237c2e85ac7680b3d0de15bbbb923985b4827def

Resend it since the change id, sorry for the noise.

> Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-rockchip@lists.infradead.org
> ---
>   drivers/pinctrl/pinctrl-rockchip.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index bf032b9..f22a186 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -1208,6 +1208,18 @@ static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
>   	return 0;
>   }
>   
> +static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
> +	int pin;
> +	u32 data;
> +
> +	pin = offset - chip->base;
> +	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
> +
> +	return !!(data & BIT(pin));
> +}
> +
>   /*
>    * The calls to gpio_direction_output() and gpio_direction_input()
>    * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
> @@ -1741,6 +1753,7 @@ static const struct gpio_chip rockchip_gpiolib_chip = {
>   	.free = gpiochip_generic_free,
>   	.set = rockchip_gpio_set,
>   	.get = rockchip_gpio_get,
> +	.get_direction	= rockchip_gpio_get_direction,
>   	.direction_input = rockchip_gpio_direction_input,
>   	.direction_output = rockchip_gpio_direction_output,
>   	.to_irq = rockchip_gpio_to_irq,

-- 
caesar wang | software engineer | wxt@rock-chip.com

      reply	other threads:[~2016-03-14  5:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-14  5:44 [PATCH] pinctrl: rockchip: add support the get_direction Caesar Wang
2016-03-14  5:57 ` Caesar Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56E652C6.7030503@rock-chips.com \
    --to=wxt@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox