Re: [PATCH v4 1/7] ARM: OMAP2+: gpmc-nand: Set omap2-nand's parent dev to GPMC dev

[Roger Quadros <rogerq@ti.com>]

Franklin, Tony,

On 11/03/16 17:39, Franklin S Cooper Jr. wrote:
> 
> 
> On 03/11/2016 07:52 AM, Roger Quadros wrote:
>> Franklin,
>>
>> On 11/03/16 01:56, Franklin S Cooper Jr wrote:
>>> The dma channel information is located within the GPMC node which is the
>>> NAND's parent node. The NAND driver requires a handle to the GPMC's dev
>>> to properly parse the DMA properties. Therefore, set the NAND's parent dev
>>> to the GPMC's dev so it can be referenced within the driver.
>>>
>>> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
>>> ---
>>> Version 4 changes:
>>> Instead of storing the GPMC dev in a new property simply grab a reference
>>> to it and set omap2-nand's dev.parent to it.
>>>
>>>  arch/arm/mach-omap2/gpmc-nand.c | 16 +++++++++++++++-
>>>  1 file changed, 15 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
>>> index 72918c4..77e453c 100644
>>> --- a/arch/arm/mach-omap2/gpmc-nand.c
>>> +++ b/arch/arm/mach-omap2/gpmc-nand.c
>>> @@ -15,6 +15,7 @@
>>>  #include <linux/omap-gpmc.h>
>>>  #include <linux/mtd/nand.h>
>>>  #include <linux/platform_data/mtd-nand-omap2.h>
>>> +#include <linux/of_platform.h>
>>>  
>>>  #include <asm/mach/flash.h>
>>>  
>>> @@ -77,6 +78,9 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
>>>  	int err	= 0;
>>>  	struct gpmc_settings s;
>>>  	struct platform_device *pdev;
>>> +	struct platform_device *gpmc_dev;
>>> +	struct device_node *gpmc_node;
>>> +
>>>  	struct resource gpmc_nand_res[] = {
>>>  		{ .flags = IORESOURCE_MEM, },
>>>  		{ .flags = IORESOURCE_IRQ, },
>>> @@ -134,8 +138,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
>>>  	if (pdev) {
>>>  		err = platform_device_add_resources(pdev, gpmc_nand_res,
>>>  						    ARRAY_SIZE(gpmc_nand_res));
>>> -		if (!err)
>>> +		if (!err) {
>>>  			pdev->dev.platform_data = gpmc_nand_data;
>>> +
>>> +			gpmc_node = of_get_parent(gpmc_nand_data->of_node);
>> I'm afraid that we can't use this method as we want to restrict
>> gpmc_nand_init() to non-DT boots.
> 
> The only users of the parent GPMC driver are already using
> DT. The gpmc_probe_nand_child function in the GPMC driver
> which calls gpmc_nand_init is already DT only.
> 
> The only other caller to gpmc_nand_init is board-flash.c.
> The driver doesn't utilize xfer_type to even switch to any
> other modes including DMA prefetch mode.  Looking at it
> closer there isn't a dev from some kind of parent for me to
> pass along. Board_nand_init which calls gpmc_nand_init just
> takes raw NAND values with no relation to its parent.
> 
> 
> With that being said are you ok with leaving it as is?

I think it is OK to assume that NAND DMA won't work with legacy boot.
Tony any objections? I see that board-ldp.c is the only legacy user
of NAND. When can we drop support for it?

I want to keep gpmc_nand_init() as it is and don't want to add any
device tree specific calls here.

So I think it is still best if you rebase your series on top of [1]
so that you are assured NAND controller's parent is the GPMC device
in the DT case without requiring the $subject patch.

[1] https://lkml.org/lkml/2016/2/19/599
The series has been Acked by all maintainers and will go in v4.6

cheers,
-roger