[PATCH v10 0/6] add support for DWC UFS Controller

[PATCH v10 0/6] add support for DWC UFS Controller

[Joao Pinto]

The work consisted of:
- Fixed typo in ufshcd-pltfrm.c
- Tweak ufshcd.c for UFS 2.0 support
- Implement ufshcd-dwc which contains all DWC HW specific code
- Unipro attributes were added and new registers were added to the driver
- Implement a tc-dwc-g210 containing G210 MPHY specific code
- Implement a tc-dwc-g210 glue platform driver
- Implement a tc-dwc-g210 glue pci driver
- Documentation update

Remark: The individual patches are not atomic, depending on other patches of
the set. The patch set was made like this to improve readability.

Joao Pinto (6):
  fixed typo in ufshcd-pltfrm
  added UFS 2.0 capabilities
  added support for DesignWare Controller
  added support for Synopsys G210 Test Chip
  add TC G210 platform driver
  add TC G210 pci driver

 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 ++
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |   4 +-
 MAINTAINERS                                        |   6 +
 drivers/scsi/ufs/Kconfig                           |  25 ++
 drivers/scsi/ufs/Makefile                          |   4 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c                 | 178 ++++++++++++
 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 109 +++++++
 drivers/scsi/ufs/tc-dwc-g210.c                     | 315 +++++++++++++++++++++
 drivers/scsi/ufs/tc-dwc-g210.h                     |  19 ++
 drivers/scsi/ufs/ufshcd-dwc.c                      | 150 ++++++++++
 drivers/scsi/ufs/ufshcd-dwc.h                      |  26 ++
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |   2 +-
 drivers/scsi/ufs/ufshcd.c                          |  29 +-
 drivers/scsi/ufs/ufshcd.h                          |   2 +
 drivers/scsi/ufs/ufshci-dwc.h                      |  42 +++
 drivers/scsi/ufs/ufshci.h                          |   1 +
 drivers/scsi/ufs/unipro.h                          |  39 +++
 17 files changed, 970 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
 create mode 100644 drivers/scsi/ufs/ufshci-dwc.h

-- 
1.8.1.5

[PATCH v10 1/6] fixed typo in ufshcd-pltfrm

[Joao Pinto]

Fixed typo in ufshcd-pltfrm.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v0->v10:
- Nothing changed (just to keep up with patch set version).

 drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index d2a7b12..0522891 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -353,6 +353,6 @@ EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
 
 MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
 MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
-MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
+MODULE_DESCRIPTION("UFS host controller Platform bus based glue driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(UFSHCD_DRIVER_VERSION);
-- 
1.8.1.5

Re: [PATCH v10 1/6] fixed typo in ufshcd-pltfrm

[Arnd Bergmann]

On Friday 04 March 2016 17:22:14 Joao Pinto wrote:
> Fixed typo in ufshcd-pltfrm.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>

Acked-by: Arnd Bergmann <arnd@arndb.de>

[PATCH v10 2/6] added UFS 2.0 capabilities

[Joao Pinto]

Adding UFS 2.0 support to the UFS core driver.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v8->v10:
- Nothing changed (just to keep up with patch set version).
Changes v7->v8:
- Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings
Changes v0->v7:
- Nothing changed (just to keep up with patch set version).

 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
 drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
 drivers/scsi/ufs/ufshci.h                          |  1 +
 3 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 03c0e98..8d9a9d2 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible		: must contain "jedec,ufs-1.1", may also list one or more
-					  of the following:
+- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
+			  also list one or more of the following:
 					  "qcom,msm8994-ufshc"
 					  "qcom,msm8996-ufshc"
 					  "qcom,ufshc"
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 85cd256..2b5f2bf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1223,6 +1223,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 			ret = -EINVAL;
 		}
 		break;
+	case UTP_CMD_TYPE_UFS_STORAGE:
 	case UTP_CMD_TYPE_DEV_MANAGE:
 		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
 		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
@@ -1287,6 +1288,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	struct ufshcd_lrb *lrbp;
 	struct ufs_hba *hba;
 	unsigned long flags;
+	u32 upiu_flags;
 	int tag;
 	int err = 0;
 
@@ -1343,10 +1345,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
-	lrbp->command_type = UTP_CMD_TYPE_SCSI;
+
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_SCSI;
 
 	/* form UPIU before issuing the command */
-	ufshcd_compose_upiu(hba, lrbp);
+	if (hba->ufs_version == UFSHCI_VERSION_20) {
+		if (likely(lrbp->cmd)) {
+			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
+					lrbp->cmd->sc_data_direction);
+			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
+		} else
+			err = -EINVAL;
+	} else
+		ufshcd_compose_upiu(hba, lrbp);
+
 	err = ufshcd_map_sg(lrbp);
 	if (err) {
 		lrbp->cmd = NULL;
@@ -1371,7 +1386,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
 	lrbp->sense_buffer = NULL;
 	lrbp->task_tag = tag;
 	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
-	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+
 	lrbp->intr_cmd = true; /* No interrupt aggregation */
 	hba->dev_cmd.type = cmd_type;
 
@@ -3187,7 +3207,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 			/* Do not touch lrbp after scsi done */
 			cmd->scsi_done(cmd);
 			__ufshcd_release(hba);
-		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) {
+		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
+			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
 			if (hba->dev_cmd.complete)
 				complete(hba->dev_cmd.complete);
 		}
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 0ae0967..8dba0e7 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -273,6 +273,7 @@ enum {
 	UTP_CMD_TYPE_SCSI		= 0x0,
 	UTP_CMD_TYPE_UFS		= 0x1,
 	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
+	UTP_CMD_TYPE_UFS_STORAGE	= 0x11,
 };
 
 enum {
-- 
1.8.1.5

Re: [PATCH v10 2/6] added UFS 2.0 capabilities

[Arnd Bergmann]

On Friday 04 March 2016 17:22:15 Joao Pinto wrote:
> Adding UFS 2.0 support to the UFS core driver.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> 

Acked-by: Arnd Bergmann <arnd@arndb.de>

Re: [PATCH v10 2/6] added UFS 2.0 capabilities

[Rob Herring]

On Fri, Mar 04, 2016 at 05:22:15PM +0000, Joao Pinto wrote:
> Adding UFS 2.0 support to the UFS core driver.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> ---
> Changes v8->v10:
> - Nothing changed (just to keep up with patch set version).
> Changes v7->v8:
> - Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings
> Changes v0->v7:
> - Nothing changed (just to keep up with patch set version).
> 
>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
>  drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
>  drivers/scsi/ufs/ufshci.h                          |  1 +
>  3 files changed, 28 insertions(+), 6 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [RESEND] [PATCH v11 2/6] added UFS 2.0 capabilities

[Rob Herring]

On Thu, Mar 17, 2016 at 7:39 AM, Joao Pinto <Joao.Pinto@synopsys.com> wrote:
> Adding UFS 2.0 support to the UFS core driver.
>
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Rob Herring <robh@kernel.org>

You don't need to resend just to add acks. The maintainer will do that.

Rob

RE: [RESEND] [PATCH v11 2/6] added UFS 2.0 capabilities

[Winkler, Tomas]

Adding UFS 2.0 support to the UFS core driver.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes v8->v11:
- Nothing changed (just to keep up with patch set version).
Changes v7->v8:
- Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings Changes v0->v7:
- Nothing changed (just to keep up with patch set version).

 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
 drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
 drivers/scsi/ufs/ufshci.h                          |  1 +
 3 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 03c0e98..8d9a9d2 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible		: must contain "jedec,ufs-1.1", may also list one or more
-					  of the following:
+- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
+			  also list one or more of the following:
 					  "qcom,msm8994-ufshc"
 					  "qcom,msm8996-ufshc"
 					  "qcom,ufshc"
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 85cd256..2b5f2bf 100644

I think this should go in separate patch 

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1223,6 +1223,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 			ret = -EINVAL;
 		}
 		break;
+	case UTP_CMD_TYPE_UFS_STORAGE:
 	case UTP_CMD_TYPE_DEV_MANAGE:
 		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
 		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) @@ -1287,6 +1288,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	struct ufshcd_lrb *lrbp;
 	struct ufs_hba *hba;
 	unsigned long flags;
+	u32 upiu_flags;
 	int tag;
 	int err = 0;
 
@@ -1343,10 +1345,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
-	lrbp->command_type = UTP_CMD_TYPE_SCSI;
+
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_SCSI;
This translation can be pushed to prepare_req_desc_hdr and you end up with  ~oneliner fix 

 
 	/* form UPIU before issuing the command */
-	ufshcd_compose_upiu(hba, lrbp);
+	if (hba->ufs_version == UFSHCI_VERSION_20) {
+		if (likely(lrbp->cmd)) {
How this can be possible NULL, the code above will crash or I'm missing something ? 
+			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
+					lrbp->cmd->sc_data_direction);
+			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
What is different her from the code in ufshcd_compose_upiu ?
+		} else
+			err = -EINVAL;
+	} else
+		ufshcd_compose_upiu(hba, lrbp);
+
 	err = ufshcd_map_sg(lrbp);
 	if (err) {
 		lrbp->cmd = NULL;
@@ -1371,7 +1386,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
 	lrbp->sense_buffer = NULL;
 	lrbp->task_tag = tag;
 	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
-	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+
This translation can be pushed to prepare_req_desc_hdr and you end up with ~ oneliner fix

 	lrbp->intr_cmd = true; /* No interrupt aggregation */
 	hba->dev_cmd.type = cmd_type;
 
@@ -3187,7 +3207,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 			/* Do not touch lrbp after scsi done */
 			cmd->scsi_done(cmd);
 			__ufshcd_release(hba);
-		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) {
+		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
+			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
 			if (hba->dev_cmd.complete)
 				complete(hba->dev_cmd.complete);
 		}
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 0ae0967..8dba0e7 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -273,6 +273,7 @@ enum {
 	UTP_CMD_TYPE_SCSI		= 0x0,
 	UTP_CMD_TYPE_UFS		= 0x1,
 	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
+	UTP_CMD_TYPE_UFS_STORAGE	= 0x11,
 };
 
 enum {
--
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND] [PATCH v11 2/6] added UFS 2.0 capabilities

[Joao Pinto]

Hi Thomas,

On 3/29/2016 11:41 AM, Winkler, Tomas wrote:
> 
> Adding UFS 2.0 support to the UFS core driver.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes v8->v11:
> - Nothing changed (just to keep up with patch set version).
> Changes v7->v8:
> - Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings Changes v0->v7:
> - Nothing changed (just to keep up with patch set version).
> 
>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
>  drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
>  drivers/scsi/ufs/ufshci.h                          |  1 +
>  3 files changed, 28 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> index 03c0e98..8d9a9d2 100644
> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> @@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
>  Each UFS controller instance should have its own node.
>  
>  Required properties:
> -- compatible		: must contain "jedec,ufs-1.1", may also list one or more
> -					  of the following:
> +- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
> +			  also list one or more of the following:
>  					  "qcom,msm8994-ufshc"
>  					  "qcom,msm8996-ufshc"
>  					  "qcom,ufshc"
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 85cd256..2b5f2bf 100644
> 
> I think this should go in separate patch

In my opinion it only makes sense to add 2.0 to the device-tree binding if the
driver actually supports it, that was why I added to the same patch, but of
course it can be separated if more people agree with the approach.

> 
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1223,6 +1223,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>  			ret = -EINVAL;
>  		}
>  		break;
> +	case UTP_CMD_TYPE_UFS_STORAGE:
>  	case UTP_CMD_TYPE_DEV_MANAGE:
>  		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
>  		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) @@ -1287,6 +1288,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>  	struct ufshcd_lrb *lrbp;
>  	struct ufs_hba *hba;
>  	unsigned long flags;
> +	u32 upiu_flags;
>  	int tag;
>  	int err = 0;
>  
> @@ -1343,10 +1345,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>  	lrbp->task_tag = tag;
>  	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
>  	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
> -	lrbp->command_type = UTP_CMD_TYPE_SCSI;
> +
> +	if (hba->ufs_version == UFSHCI_VERSION_20)
> +		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
> +	else
> +		lrbp->command_type = UTP_CMD_TYPE_SCSI;
> This translation can be pushed to prepare_req_desc_hdr and you end up with  ~oneliner fix 

I think your suggestion is good! We have to check the 2.0 version in 2 places
and with your approach we would only check it in prepare_req_desc_hdr() once.
I will do that update!

> 
>  
>  	/* form UPIU before issuing the command */
> -	ufshcd_compose_upiu(hba, lrbp);
> +	if (hba->ufs_version == UFSHCI_VERSION_20) {
> +		if (likely(lrbp->cmd)) {
> How this can be possible NULL, the code above will crash or I'm missing something ? 
> +			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
> +					lrbp->cmd->sc_data_direction);
> +			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
> What is different her from the code in ufshcd_compose_upiu ?
> +		} else
> +			err = -EINVAL;
> +	} else
> +		ufshcd_compose_upiu(hba, lrbp);

If you check ufshcd_compose_upiu() you will see that it contains 2 scopes:
cmd_upiu and query_req_upiu. Before 2.0 this single function approach that had
both scopes worked well, but now with 2.0 we must use the same command_type
(UTP_CMD_TYPE_UFS_STORAGE) which causes incompatibility. This was why I put the
same code from cmd_upiu in the outside.

Of course we can break ufshcd_compose_upiu() in 2: ufshcd_compose_cmd_upiu() and
ufshcd_compose_query_upiu(). What do you think?

> +
>  	err = ufshcd_map_sg(lrbp);
>  	if (err) {
>  		lrbp->cmd = NULL;
> @@ -1371,7 +1386,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
>  	lrbp->sense_buffer = NULL;
>  	lrbp->task_tag = tag;
>  	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
> -	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
> +
> +	if (hba->ufs_version == UFSHCI_VERSION_20)
> +		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
> +	else
> +		lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
> +
> This translation can be pushed to prepare_req_desc_hdr and you end up with ~ oneliner fix
> 
>  	lrbp->intr_cmd = true; /* No interrupt aggregation */
>  	hba->dev_cmd.type = cmd_type;
>  
> @@ -3187,7 +3207,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
>  			/* Do not touch lrbp after scsi done */
>  			cmd->scsi_done(cmd);
>  			__ufshcd_release(hba);
> -		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) {
> +		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
> +			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
>  			if (hba->dev_cmd.complete)
>  				complete(hba->dev_cmd.complete);
>  		}
> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index 0ae0967..8dba0e7 100644
> --- a/drivers/scsi/ufs/ufshci.h
> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -273,6 +273,7 @@ enum {
>  	UTP_CMD_TYPE_SCSI		= 0x0,
>  	UTP_CMD_TYPE_UFS		= 0x1,
>  	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
> +	UTP_CMD_TYPE_UFS_STORAGE	= 0x11,
>  };
>  
>  enum {
> --
> 1.8.1.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Thanks,
Joao

RE: [RESEND] [PATCH v11 2/6] added UFS 2.0 capabilities

[Winkler, Tomas]

Hi Thomas,

On 3/29/2016 11:41 AM, Winkler, Tomas wrote:
> 
> Adding UFS 2.0 support to the UFS core driver.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes v8->v11:
> - Nothing changed (just to keep up with patch set version).
> Changes v7->v8:
> - Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings Changes v0->v7:
> - Nothing changed (just to keep up with patch set version).
> 
>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
>  drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
>  drivers/scsi/ufs/ufshci.h                          |  1 +
>  3 files changed, 28 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt 
> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> index 03c0e98..8d9a9d2 100644
> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> @@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
>  Each UFS controller instance should have its own node.
>  
>  Required properties:
> -- compatible		: must contain "jedec,ufs-1.1", may also list one or more
> -					  of the following:
> +- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
> +			  also list one or more of the following:
>  					  "qcom,msm8994-ufshc"
>  					  "qcom,msm8996-ufshc"
>  					  "qcom,ufshc"
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c 
> index 85cd256..2b5f2bf 100644
> 
> I think this should go in separate patch

In my opinion it only makes sense to add 2.0 to the device-tree binding if the driver actually supports it, that was why I added to the same patch, but of course it can be separated if more people agree with the approach.

Yes, we have ufshcd-pci device that needs that so I think this should go separately 
> 
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -1223,6 +1223,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>  			ret = -EINVAL;
>  		}
>  		break;
> +	case UTP_CMD_TYPE_UFS_STORAGE:
>  	case UTP_CMD_TYPE_DEV_MANAGE:
>  		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
>  		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) @@ -1287,6 +1288,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>  	struct ufshcd_lrb *lrbp;
>  	struct ufs_hba *hba;
>  	unsigned long flags;
> +	u32 upiu_flags;
>  	int tag;
>  	int err = 0;
>  
> @@ -1343,10 +1345,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>  	lrbp->task_tag = tag;
>  	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
>  	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
> -	lrbp->command_type = UTP_CMD_TYPE_SCSI;
> +
> +	if (hba->ufs_version == UFSHCI_VERSION_20)
> +		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
> +	else
> +		lrbp->command_type = UTP_CMD_TYPE_SCSI;
> This translation can be pushed to prepare_req_desc_hdr and you end up 
> with  ~oneliner fix

I think your suggestion is good! We have to check the 2.0 version in 2 places and with your approach we would only check it in prepare_req_desc_hdr() once.
I will do that update!

Okay I think you can alter ufshcd_lrb structure and push the information there,
Add ufs version there as hba is not available in req_desc_hdr, I think both command_type and ufs_version can be u8 so the structure won't grow. 


> 
>  
>  	/* form UPIU before issuing the command */
> -	ufshcd_compose_upiu(hba, lrbp);
> +	if (hba->ufs_version == UFSHCI_VERSION_20) {
> +		if (likely(lrbp->cmd)) {
> How this can be possible NULL, the code above will crash or I'm missing something ? 
> +			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
> +					lrbp->cmd->sc_data_direction);
> +			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
> What is different her from the code in ufshcd_compose_upiu ?
> +		} else
> +			err = -EINVAL;
> +	} else
> +		ufshcd_compose_upiu(hba, lrbp);

If you check ufshcd_compose_upiu() you will see that it contains 2 scopes:
cmd_upiu and query_req_upiu. Before 2.0 this single function approach that had both scopes worked well, but now with 2.0 we must use the same command_type
(UTP_CMD_TYPE_UFS_STORAGE) which causes incompatibility. This was why I put the same code from cmd_upiu in the outside.

Of course we can break ufshcd_compose_upiu() in 2: ufshcd_compose_cmd_upiu() and ufshcd_compose_query_upiu(). What do you think?
If you use ufs_version only in req_desc_hdr then you don't need this

If (ufs_version == 2.0)
   cmd_type = UFS_STORAGE 
else 
    cmd_type = lrb->command_type 

... 
I think with this change 

> +
>  	err = ufshcd_map_sg(lrbp);
>  	if (err) {
>  		lrbp->cmd = NULL;
> @@ -1371,7 +1386,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
>  	lrbp->sense_buffer = NULL;
>  	lrbp->task_tag = tag;
>  	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
> -	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
> +
> +	if (hba->ufs_version == UFSHCI_VERSION_20)
> +		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
> +	else
> +		lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
> +
> This translation can be pushed to prepare_req_desc_hdr and you end up 
> with ~ oneliner fix
> 
>  	lrbp->intr_cmd = true; /* No interrupt aggregation */
>  	hba->dev_cmd.type = cmd_type;
>  
> @@ -3187,7 +3207,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
>  			/* Do not touch lrbp after scsi done */
>  			cmd->scsi_done(cmd);
>  			__ufshcd_release(hba);
> -		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) {
> +		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
> +			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
>  			if (hba->dev_cmd.complete)
>  				complete(hba->dev_cmd.complete);
>  		}
> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h 
> index 0ae0967..8dba0e7 100644
> --- a/drivers/scsi/ufs/ufshci.h
> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -273,6 +273,7 @@ enum {
>  	UTP_CMD_TYPE_SCSI		= 0x0,
>  	UTP_CMD_TYPE_UFS		= 0x1,
>  	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
> +	UTP_CMD_TYPE_UFS_STORAGE	= 0x11,
Why 0x11? 

Thanks
Tomas 

Re: [RESEND] [PATCH v11 2/6] added UFS 2.0 capabilities

[Joao Pinto]

On 3/29/2016 12:33 PM, Winkler, Tomas wrote:
> Hi Thomas,
> 
> On 3/29/2016 11:41 AM, Winkler, Tomas wrote:
>>
>> Adding UFS 2.0 support to the UFS core driver.
>>
>> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
>> Acked-by: Arnd Bergmann <arnd@arndb.de>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>> Changes v8->v11:
>> - Nothing changed (just to keep up with patch set version).
>> Changes v7->v8:
>> - Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings Changes v0->v7:
>> - Nothing changed (just to keep up with patch set version).
>>
>>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  4 +--
>>  drivers/scsi/ufs/ufshcd.c                          | 29 +++++++++++++++++++---
>>  drivers/scsi/ufs/ufshci.h                          |  1 +
>>  3 files changed, 28 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt 
>> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> index 03c0e98..8d9a9d2 100644
>> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> @@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
>>  Each UFS controller instance should have its own node.
>>  
>>  Required properties:
>> -- compatible		: must contain "jedec,ufs-1.1", may also list one or more
>> -					  of the following:
>> +- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
>> +			  also list one or more of the following:
>>  					  "qcom,msm8994-ufshc"
>>  					  "qcom,msm8996-ufshc"
>>  					  "qcom,ufshc"
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c 
>> index 85cd256..2b5f2bf 100644
>>
>> I think this should go in separate patch
> 
> In my opinion it only makes sense to add 2.0 to the device-tree binding if the driver actually supports it, that was why I added to the same patch, but of course it can be separated if more people agree with the approach.
> 
> Yes, we have ufshcd-pci device that needs that so I think this should go separately 

I will separate this, no problem.

>>
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -1223,6 +1223,7 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>>  			ret = -EINVAL;
>>  		}
>>  		break;
>> +	case UTP_CMD_TYPE_UFS_STORAGE:
>>  	case UTP_CMD_TYPE_DEV_MANAGE:
>>  		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
>>  		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) @@ -1287,6 +1288,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>>  	struct ufshcd_lrb *lrbp;
>>  	struct ufs_hba *hba;
>>  	unsigned long flags;
>> +	u32 upiu_flags;
>>  	int tag;
>>  	int err = 0;
>>  
>> @@ -1343,10 +1345,23 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
>>  	lrbp->task_tag = tag;
>>  	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
>>  	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
>> -	lrbp->command_type = UTP_CMD_TYPE_SCSI;
>> +
>> +	if (hba->ufs_version == UFSHCI_VERSION_20)
>> +		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
>> +	else
>> +		lrbp->command_type = UTP_CMD_TYPE_SCSI;
>> This translation can be pushed to prepare_req_desc_hdr and you end up 
>> with  ~oneliner fix
> 
> I think your suggestion is good! We have to check the 2.0 version in 2 places and with your approach we would only check it in prepare_req_desc_hdr() once.
> I will do that update!
> 
> Okay I think you can alter ufshcd_lrb structure and push the information there,
> Add ufs version there as hba is not available in req_desc_hdr, I think both command_type and ufs_version can be u8 so the structure won't grow. 

Going to check it out.

> 
> 
>>
>>  
>>  	/* form UPIU before issuing the command */
>> -	ufshcd_compose_upiu(hba, lrbp);
>> +	if (hba->ufs_version == UFSHCI_VERSION_20) {
>> +		if (likely(lrbp->cmd)) {
>> How this can be possible NULL, the code above will crash or I'm missing something ? 
>> +			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
>> +					lrbp->cmd->sc_data_direction);
>> +			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
>> What is different her from the code in ufshcd_compose_upiu ?
>> +		} else
>> +			err = -EINVAL;
>> +	} else
>> +		ufshcd_compose_upiu(hba, lrbp);
> 
> If you check ufshcd_compose_upiu() you will see that it contains 2 scopes:
> cmd_upiu and query_req_upiu. Before 2.0 this single function approach that had both scopes worked well, but now with 2.0 we must use the same command_type
> (UTP_CMD_TYPE_UFS_STORAGE) which causes incompatibility. This was why I put the same code from cmd_upiu in the outside.
> 
> Of course we can break ufshcd_compose_upiu() in 2: ufshcd_compose_cmd_upiu() and ufshcd_compose_query_upiu(). What do you think?
> If you use ufs_version only in req_desc_hdr then you don't need this
> 
> If (ufs_version == 2.0)
>    cmd_type = UFS_STORAGE 
> else 
>     cmd_type = lrb->command_type 
> 
> ... 
> I think with this change 

Ok, I will test that.

> 
>> +
>>  	err = ufshcd_map_sg(lrbp);
>>  	if (err) {
>>  		lrbp->cmd = NULL;
>> @@ -1371,7 +1386,12 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
>>  	lrbp->sense_buffer = NULL;

[snip]

>>  				complete(hba->dev_cmd.complete);
>>  		}
>> diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h 
>> index 0ae0967..8dba0e7 100644
>> --- a/drivers/scsi/ufs/ufshci.h
>> +++ b/drivers/scsi/ufs/ufshci.h
>> @@ -273,6 +273,7 @@ enum {
>>  	UTP_CMD_TYPE_SCSI		= 0x0,
>>  	UTP_CMD_TYPE_UFS		= 0x1,
>>  	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
>> +	UTP_CMD_TYPE_UFS_STORAGE	= 0x11,
> Why 0x11? 

I'll have to check with our R&D team.

> 
> Thanks
> Tomas 
> 

Thanks
Joao

[PATCH v10 3/6] added support for DesignWare Controller

[Joao Pinto]

This patch has the goal to add support for DesignWare UFS Controller
specific operations.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v9->v10 (Arnd Bergmann):
- Patch now only has DWC controller specific code
- Added custom_phy_initialization callback for PHY specific code
Changes v8->v9 (Robert Herring):
- drop 0x in the node declaration
- most specific compatibility string declared first
Changes v7->v8 (Akinobu Mita):
- DME sets were simplified for easier reading
- CLK DIV default values definitions names were changed to match the
 register's name
- New line added to dev_err and dev_info statements
Changes v6->v7 (Arnd Bergmann):
- Changed DT node name (to ufs only) and the memory address (to 0xd000000)
- Removed CONFIG_PM from the PCI glue driver (pm.h already does this)
- No other changes are necessary in ufshcd.c because of the link up notify
 function usage (it is simpler now)
- Removed the PHY mentioning since the Test Chip is not a real PHY for real
 world usage, since it is a test chip for prototyping with a very specific
 usage
- Added again the Test Chip 20-bit option
Changes v5->v6:
- Patch bad format fixed
Changes v4->v5 (Akinobu Mita):
- All functions used only locally in ufshcd-dwc are now declared as static
- ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify
 function (ufshcd_dwc_link_startup_notify) was created to deal with the
 DWC specific init routines
- 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected
 and 40-bit is not then it assumes a 20-bit config
Changes v3->v4 (Arnd Bergmann and Mark Rutland):
- SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT
 or SCSI_UFS_DWC_PCI
- Compatibility string has the ufs core version for info purposes since
 the driver is capable of getting the controller version from its 
 registers
- Created ufs-dwc-pci glue driver with specific DWC data
- MPHY configuration remains in the ufshcd-dwc since it is unipro
 attribute writting only not following the a linux phy framework logic
Changes v2->v3 (Julian Calaby):
- Implement a common DWC code to be used by the platform and pci glue
 drivers
- Synopsys ID & Class added to the existing pci driver and specific DWC
 was also added to the pci driver
Changes v1->v2 (Akinobu Mita):
- Implement a platform driver that uses the existing UFS core driver
- Add DWC specific code to the existing UFS core driver

 MAINTAINERS                   |   6 ++
 drivers/scsi/ufs/Kconfig      |   3 +
 drivers/scsi/ufs/Makefile     |   1 +
 drivers/scsi/ufs/ufshcd-dwc.c | 150 ++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-dwc.h |  26 ++++++++
 drivers/scsi/ufs/ufshcd.h     |   2 +
 drivers/scsi/ufs/ufshci-dwc.h |  42 ++++++++++++
 drivers/scsi/ufs/unipro.h     |  39 +++++++++++
 8 files changed, 269 insertions(+)
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
 create mode 100644 drivers/scsi/ufs/ufshci-dwc.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d2f94e2..3db3c4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11006,6 +11006,12 @@ S:	Supported
 F:	Documentation/scsi/ufs.txt
 F:	drivers/scsi/ufs/
 
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
+M:	Joao Pinto <Joao.Pinto@synopsys.com>
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/ufs/*dwc*
+
 UNSORTED BLOCK IMAGES (UBI)
 M:	Artem Bityutskiy <dedekind1@gmail.com>
 M:	Richard Weinberger <richard@nod.at>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5f45307..647c324 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -83,3 +83,6 @@ config SCSI_UFS_QCOM
 
 	  Select this if you have UFS controller on QCOM chipset.
 	  If unsure, say N.
+
+config SCSI_UFS_DWC
+	bool
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 8303bcc..ccbad53 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,5 @@
 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
new file mode 100644
index 0000000..c1b8a7f
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.c
@@ -0,0 +1,150 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n)
+{
+	int ret = 0;
+	int attr_node = 0;
+
+	for (attr_node = 0; attr_node < n; attr_node++) {
+		ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+			ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs);
+
+/**
+ * ufshcd_dwc_program_clk_div()
+ * This function programs the clk divider value. This value is needed to
+ * provide 1 microsecond tick to unipro layer.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+	ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up()
+ * Check if link is up
+ * @hba: private structure poitner
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+	int dme_result = 0;
+
+	ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+	if (dme_result == UFSHCD_LINK_IS_UP) {
+		ufshcd_set_link_active(hba);
+		return 0;
+	}
+
+	return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup()
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * @hba: pointer to drivers private data
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+		{ UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+		{ UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify()
+ * UFS Host DWC specific link startup sequence
+ * @hba: private structure poitner
+ * @status: Callback notify status
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status)
+{
+	int err = 0;
+
+	if (status == PRE_CHANGE) {
+		ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+
+		if (hba->vops->custom_phy_initialization) {
+			err = hba->vops->custom_phy_initialization(hba);
+			if (err) {
+				dev_err(hba->dev, "Phy setup failed (%d)\n",
+									err);
+				goto out;
+			}
+		}
+	} else { /* POST_CHANGE */
+		err = ufshcd_dwc_link_is_up(hba);
+		if (err) {
+			dev_err(hba->dev, "Link is not up\n");
+			goto out;
+		}
+
+		err = ufshcd_dwc_connection_setup(hba);
+		if (err)
+			dev_err(hba->dev, "Connection setup failed (%d)\n",
+									err);
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h
new file mode 100644
index 0000000..c8be295
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.h
@@ -0,0 +1,26 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+struct ufshcd_dme_attr_val {
+	u32 attr_sel;
+	u32 mib_val;
+	u8 peer;
+};
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status);
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n);
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 2570d94..8b0cdf0 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -262,6 +262,7 @@ struct ufs_pwr_mode_info {
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
+ * @custom_phy_initialization: used to initialize phys in DWC Cores
  */
 struct ufs_hba_variant_ops {
 	const char *name;
@@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
+	int	(*custom_phy_initialization)(struct ufs_hba *);
 };
 
 /* clock gating state  */
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h
new file mode 100644
index 0000000..947a75c
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci-dwc.h
@@ -0,0 +1,42 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+	DWC_UFS_REG_HCLKDIV	= 0xFC,
+};
+
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+	DWC_UFS_REG_HCLKDIV_DIV_62_5	= 0x3e,
+	DWC_UFS_REG_HCLKDIV_DIV_125	= 0x7d,
+	DWC_UFS_REG_HCLKDIV_DIV_200	= 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+	SELIND_LN0_TX		= 0x00,
+	SELIND_LN1_TX		= 0x01,
+	SELIND_LN0_RX		= 0x04,
+	SELIND_LN1_RX		= 0x05,
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 816a8a4..da16254 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -35,6 +35,10 @@
 #define TX_LCC_SEQUENCER			0x0032
 #define TX_MIN_ACTIVATETIME			0x0033
 #define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
 
 /*
  * M-RX Configuration Attributes
@@ -48,8 +52,38 @@
 #define RX_ENTER_HIBERN8			0x00A7
 #define RX_BYPASS_8B10B_ENABLE			0x00A8
 #define RX_TERMINATION_FORCE_ENABLE		0x0089
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
 
 #define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
 /*
  * PHY Adpater attributes
  */
@@ -110,6 +144,11 @@
 #define PA_STALLNOCONFIGTIME	0x15A3
 #define PA_SAVECONFIGTIME	0x15A4
 
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
 /* PA power modes */
 enum {
 	FAST_MODE	= 1,
-- 
1.8.1.5

Re: [PATCH v10 3/6] added support for DesignWare Controller

[Arnd Bergmann]

On Friday 04 March 2016 17:22:16 Joao Pinto wrote:
> This patch has the goal to add support for DesignWare UFS Controller
> specific operations.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> 

Acked-by: Arnd Bergmann <arnd@arndb.de>

RE: [RESEND] [PATCH v11 3/6] added support for DesignWare Controller

[Winkler, Tomas]

diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 2570d94..8b0cdf0 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -262,6 +262,7 @@ struct ufs_pwr_mode_info {
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
+ * @custom_phy_initialization: used to initialize phys in DWC Cores
  */
 struct ufs_hba_variant_ops {
 	const char *name;
@@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
+	int	(*custom_phy_initialization)(struct ufs_hba *);
 };
I think just drop custom_ prefix these handlers are for customization so this doesn't add any information 
Also here, I prefer that infrastructure changes will be in separate patches and not mangled with a specific device patch.

 
 /* clock gating state  */
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h new file mode 100644 index 0000000..947a75c
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci-dwc.h
@@ -0,0 +1,42 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+	DWC_UFS_REG_HCLKDIV	= 0xFC,
+};
+
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};

Is is designware specific ? Then should probably be DWC_ prefixed, if  not then shouldn't be defined here.

+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h index 816a8a4..da16254 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h

Should also go to a separate  patch ?
 
@@ -35,6 +35,10 @@
 #define TX_LCC_SEQUENCER			0x0032
 #define TX_MIN_ACTIVATETIME			0x0033
 #define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
 
 /*
  * M-RX Configuration Attributes
@@ -48,8 +52,38 @@
 #define RX_ENTER_HIBERN8			0x00A7
 #define RX_BYPASS_8B10B_ENABLE			0x00A8
 #define RX_TERMINATION_FORCE_ENABLE		0x0089
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
 
 #define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
 /*
  * PHY Adpater attributes
  */
@@ -110,6 +144,11 @@
 #define PA_STALLNOCONFIGTIME	0x15A3
 #define PA_SAVECONFIGTIME	0x15A4
 
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
 /* PA power modes */
 enum {
 	FAST_MODE	= 1,
--
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND] [PATCH v11 3/6] added support for DesignWare Controller

[Joao Pinto]

Hi Thomas,

On 3/29/2016 1:15 PM, Winkler, Tomas wrote:
> 
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 2570d94..8b0cdf0 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -262,6 +262,7 @@ struct ufs_pwr_mode_info {
>   * @suspend: called during host controller PM callback
>   * @resume: called during host controller PM callback
>   * @dbg_register_dump: used to dump controller debug information
> + * @custom_phy_initialization: used to initialize phys in DWC Cores
>   */
>  struct ufs_hba_variant_ops {
>  	const char *name;
> @@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
>  	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
>  	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
>  	void	(*dbg_register_dump)(struct ufs_hba *hba);

[snip]...

>  /*
>   * PHY Adpater attributes
>   */
> @@ -110,6 +144,11 @@
>  #define PA_STALLNOCONFIGTIME	0x15A3
>  #define PA_SAVECONFIGTIME	0x15A4
>  
> +/*Other attributes*/
> +#define VS_MPHYCFGUPDT		0xD085
> +#define VS_DEBUGOMC		0xD09E
> +#define VS_POWERSTATE		0xD083
> +
>  /* PA power modes */
>  enum {
>  	FAST_MODE	= 1,
> --
> 1.8.1.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

I am planning to start working today in the v12 of the patch-set. Did you have
opportunity to check the other patches (4, 5 and 6)?

Thanks,
Joao

[PATCH v10 4/6] added support for Synopsys G210 Test Chip

[Joao Pinto]

This patch adds support for Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/Kconfig       |   4 +
 drivers/scsi/ufs/Makefile      |   1 +
 drivers/scsi/ufs/tc-dwc-g210.c | 315 +++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/tc-dwc-g210.h |  19 +++
 4 files changed, 339 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 647c324..9d218f9 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -86,3 +86,7 @@ config SCSI_UFS_QCOM
 
 config SCSI_UFS_DWC
 	bool
+
+config SCSI_UFS_DWC_TC
+	bool
+	select SCSI_UFS_DWC
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index ccbad53..9468d7b 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,5 +1,6 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/scsi/ufs/tc-dwc-g210.c
new file mode 100644
index 0000000..181f208
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210.c
@@ -0,0 +1,315 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+/**
+ * tc_dwc_g210_setup_40bit_rmmi()
+ * This function configures Synopsys TC specific atributes (40-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane0()
+ * This function configures Synopsys TC 20-bit RMMI Lane 0
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane1()
+ * This function configures Synopsys TC 20-bit RMMI Lane 1
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
+{
+	int connected_rx_lanes = 0;
+	int connected_tx_lanes = 0;
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+	};
+
+	const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f,
+								DME_LOCAL },
+	};
+
+	/* Get the available lane count */
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+			&connected_rx_lanes);
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+			&connected_tx_lanes);
+
+	if (connected_tx_lanes == 2) {
+
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs,
+						ARRAY_SIZE(setup_tx_attrs));
+
+		if (ret)
+			goto out;
+	}
+
+	if (connected_rx_lanes == 2) {
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs,
+						ARRAY_SIZE(setup_rx_attrs));
+	}
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi()
+ * This function configures Synopsys TC specific atributes (20-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+	};
+
+	ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+	if (ret)
+		goto out;
+
+	/* Lane 0 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba);
+	if (ret)
+		goto out;
+
+	/* Lane 1 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba);
+	if (ret)
+		goto out;
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_config_40_bit()
+ * This function configures Local (host) Synopsys 40-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n");
+	ret = tc_dwc_g210_setup_40bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_40_bit);
+
+/**
+ * tc_dwc_g210_config_20_bit()
+ * This function configures Local (host) Synopsys 20-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n");
+	ret = tc_dwc_g210_setup_20bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_20_bit);
diff --git a/drivers/scsi/ufs/tc-dwc-g210.h b/drivers/scsi/ufs/tc-dwc-g210.h
new file mode 100644
index 0000000..fb177db
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210.h
@@ -0,0 +1,19 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TC_DWC_G210_H
+#define _TC_DWC_G210_H
+
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba);
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba);
+
+#endif /* End of Header */
-- 
1.8.1.5

Re: [PATCH v10 4/6] added support for Synopsys G210 Test Chip

[Arnd Bergmann]

On Friday 04 March 2016 17:22:17 Joao Pinto wrote:
> This patch adds support for Synopsys G210 Test Chip.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> 

Acked-by: Arnd Bergmann <arnd@arndb.de>

[PATCH v10 5/6] add TC G210 platform driver

[Joao Pinto]

This patch adds a glue platform driver for the Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v0->v10:
- This patch only appeared in v10

 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 +++++
 drivers/scsi/ufs/Kconfig                           |   9 ++
 drivers/scsi/ufs/Makefile                          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 109 +++++++++++++++++++++
 4 files changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c

diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
new file mode 100644
index 0000000..6ec9647
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
@@ -0,0 +1,26 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible	: compatible list must contain the PHY type & version:
+			"snps, g210-tc-6.00-20bit"
+			"snps, g210-tc-6.00-40bit"
+		  complemented with the Controller IP version:
+			"snps, dwc-ufshcd-1.40a"
+		  complemented with the JEDEC version:
+			"jedec,ufs-1.1"
+			"jedec,ufs-2.0"
+
+- reg		: <registers mapping>
+- interrupts	: <interrupt mapping for UFS host controller IRQ>
+
+Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
+	dwc_ufs@d0000000 {
+		compatible = "snps, g210-tc-6.00-40bit",
+			     "snps, dwc-ufshcd-1.40a",
+			     "jedec,ufs-2.0";
+		reg = < 0xd0000000 0x10000 >;
+		interrupts = < 24 >;
+	};
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 9d218f9..5cfa87b 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -90,3 +90,12 @@ config SCSI_UFS_DWC
 config SCSI_UFS_DWC_TC
 	bool
 	select SCSI_UFS_DWC
+
+config SCSI_UFS_DWC_TC_PLATFORM
+	tristate "DesignWare platform support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PLATFORM
+	select SCSI_UFS_DWC_TC
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N."
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9468d7b..a977fe0 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,6 +1,7 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
new file mode 100644
index 0000000..c91d4b9
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
@@ -0,0 +1,109 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#include "ufshcd-pltfrm.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_pltfm_hba_vops = {
+	.name                   = "tc-dwc-g210-pltfm",
+	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * tc_dwc_g210_pltfm_probe()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
+{
+	int err;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	/* Check Test Chip type and set the specific setup routine */
+	if (of_device_is_compatible(np, "snps, g210-tc-6.00-20bit")) {
+		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_20_bit;
+	} else if (of_device_is_compatible(np, "snps, g210-tc-6.00-40bit")) {
+		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_40_bit;
+	}
+
+	/* Perform generic probe */
+	err = ufshcd_pltfrm_init(pdev, &tc_dwc_g210_pltfm_hba_vops);
+	if (err)
+		dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+	return err;
+}
+
+/**
+ * tc_dwc_g210_pltfm_remove()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&(pdev)->dev);
+	ufshcd_remove(hba);
+
+	return 0;
+}
+
+static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
+	{
+		.compatible = "snps, g210-tc-6.00-20bit"
+	},
+	{
+		.compatible = "snps, g210-tc-6.00-40bit"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tc_dwc_g210_pltfm_match);
+
+static const struct dev_pm_ops tc_dwc_g210_pltfm_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
+	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver tc_dwc_g210_pltfm_driver = {
+	.probe		= tc_dwc_g210_pltfm_probe,
+	.remove		= tc_dwc_g210_pltfm_remove,
+	.shutdown = ufshcd_pltfrm_shutdown,
+	.driver		= {
+		.name	= "tc-dwc-g210-pltfm",
+		.pm	= &tc_dwc_g210_pltfm_pm_ops,
+		.of_match_table	= of_match_ptr(tc_dwc_g210_pltfm_match),
+	},
+};
+
+module_platform_driver(tc_dwc_g210_pltfm_driver);
+
+MODULE_ALIAS("platform:tc-dwc-g210-pltfm");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 platform glue driver");
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
1.8.1.5

Re: [PATCH v10 5/6] add TC G210 platform driver

[Arnd Bergmann]

On Friday 04 March 2016 17:22:18 Joao Pinto wrote:
> This patch adds a glue platform driver for the Synopsys G210 Test Chip.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>

Looks basically ok, but I think it can be simplified a little:

> +/**
> + * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
> + */
> +static struct ufs_hba_variant_ops tc_dwc_g210_pltfm_hba_vops = {
> +	.name                   = "tc-dwc-g210-pltfm",
> +	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
> +};
> +
> +/**
> + * tc_dwc_g210_pltfm_probe()
> + * @pdev: pointer to platform device structure
> + *
> + */
> +static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
> +{
> +	int err;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +
> +	/* Check Test Chip type and set the specific setup routine */
> +	if (of_device_is_compatible(np, "snps, g210-tc-6.00-20bit")) {
> +		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
> +						tc_dwc_g210_config_20_bit;
> +	} else if (of_device_is_compatible(np, "snps, g210-tc-6.00-40bit")) {
> +		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
> +						tc_dwc_g210_config_40_bit;
> +	}

Instead of manually checking the compatible string, define two copies
of the ufs_hba_variant_ops, and put a pointer to them into the
.data field of tc_dwc_g210_pltfm_match.

	Arnd

Re: [PATCH v10 5/6] add TC G210 platform driver

[Joao Pinto]

Hi,

On 3/4/2016 9:12 PM, Arnd Bergmann wrote:
> On Friday 04 March 2016 17:22:18 Joao Pinto wrote:
>> This patch adds a glue platform driver for the Synopsys G210 Test Chip.
>>
>> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> 
> Looks basically ok, but I think it can be simplified a little:
> 
>> +/**
>> + * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
>> + */
>> +static struct ufs_hba_variant_ops tc_dwc_g210_pltfm_hba_vops = {
>> +	.name                   = "tc-dwc-g210-pltfm",
>> +	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
>> +};
>> +
>> +/**
>> + * tc_dwc_g210_pltfm_probe()
>> + * @pdev: pointer to platform device structure
>> + *
>> + */
>> +static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
>> +{
>> +	int err;
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +
>> +	/* Check Test Chip type and set the specific setup routine */
>> +	if (of_device_is_compatible(np, "snps, g210-tc-6.00-20bit")) {
>> +		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
>> +						tc_dwc_g210_config_20_bit;
>> +	} else if (of_device_is_compatible(np, "snps, g210-tc-6.00-40bit")) {
>> +		tc_dwc_g210_pltfm_hba_vops.custom_phy_initialization =
>> +						tc_dwc_g210_config_40_bit;
>> +	}
> 
> Instead of manually checking the compatible string, define two copies
> of the ufs_hba_variant_ops, and put a pointer to them into the
> .data field of tc_dwc_g210_pltfm_match.

Sounds nice. I'll do that!

> 
> 	Arnd
> 

Joao

[PATCH v10 6/6] add TC G210 pci driver

[Joao Pinto]

This patch adds a glue pci driver for the Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/Kconfig           |   9 ++
 drivers/scsi/ufs/Makefile          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c | 178 +++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5cfa87b..5a3fde7 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -99,3 +99,12 @@ config SCSI_UFS_DWC_TC_PLATFORM
 	  Synopsys Test Chip is a PHY for prototyping purposes.
 
 	  If unsure, say N."
+
+config SCSI_UFS_DWC_TC_PCI
+	tristate "DesignWare pci support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PCI
+	select SCSI_UFS_DWC_TC
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N."
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index a977fe0..5303d85 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
new file mode 100644
index 0000000..cac8fae
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -0,0 +1,178 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+
+/* Test Chip type expected values */
+#define TC_G210_20BIT 20
+#define TC_G210_40BIT 40
+#define TC_G210_DEFAULTBIT 40
+
+static int tc_type = TC_G210_DEFAULTBIT;
+module_param(tc_type, int, 0);
+MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)");
+
+static int tc_dwc_g210_pci_suspend(struct device *dev)
+{
+	return ufshcd_system_suspend(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_resume(struct device *dev)
+{
+	return ufshcd_system_resume(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_suspend(struct device *dev)
+{
+	return ufshcd_runtime_suspend(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_resume(struct device *dev)
+{
+	return ufshcd_runtime_resume(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_idle(struct device *dev)
+{
+	return ufshcd_runtime_idle(dev_get_drvdata(dev));
+}
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = {
+	.name                   = "tc-dwc-g210-pci",
+	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev)
+{
+	ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+/**
+ * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space
+ *		data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void tc_dwc_g210_pci_remove(struct pci_dev *pdev)
+{
+	struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	ufshcd_remove(hba);
+}
+
+/**
+ * tc_dwc_g210_pci_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int
+tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct ufs_hba *hba;
+	void __iomem *mmio_base;
+	int err;
+
+	/* Check Test Chip type and set the specific setup routine */
+	if (tc_type == TC_G210_20BIT) {
+		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_20_bit;
+	} else if (tc_type == TC_G210_40BIT) {
+		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_40_bit;
+	}
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pcim_enable_device failed\n");
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD);
+	if (err < 0) {
+		dev_err(&pdev->dev, "request and iomap failed\n");
+		return err;
+	}
+
+	mmio_base = pcim_iomap_table(pdev)[0];
+
+	err = ufshcd_alloc_host(&pdev->dev, &hba);
+	if (err) {
+		dev_err(&pdev->dev, "Allocation failed\n");
+		return err;
+	}
+
+	INIT_LIST_HEAD(&hba->clk_list_head);
+
+	hba->vops = &tc_dwc_g210_pci_hba_vops;
+
+	err = ufshcd_init(hba, mmio_base, pdev->irq);
+	if (err) {
+		dev_err(&pdev->dev, "Initialization failed\n");
+		return err;
+	}
+
+	pci_set_drvdata(pdev, hba);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
+	.suspend	= tc_dwc_g210_pci_suspend,
+	.resume		= tc_dwc_g210_pci_resume,
+	.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
+	.runtime_resume  = tc_dwc_g210_pci_runtime_resume,
+	.runtime_idle    = tc_dwc_g210_pci_runtime_idle,
+};
+
+static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
+	{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ }	/* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl);
+
+static struct pci_driver tc_dwc_g210_pci_driver = {
+	.name = UFSHCD,
+	.id_table = tc_dwc_g210_pci_tbl,
+	.probe = tc_dwc_g210_pci_probe,
+	.remove = tc_dwc_g210_pci_remove,
+	.shutdown = tc_dwc_g210_pci_shutdown,
+	.driver = {
+		.pm = &tc_dwc_g210_pci_pm_ops
+	},
+};
+
+module_pci_driver(tc_dwc_g210_pci_driver);
+
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
1.8.1.5

Re: [PATCH v10 6/6] add TC G210 pci driver

[Arnd Bergmann]

On Friday 04 March 2016 17:22:19 Joao Pinto wrote:
> This patch adds a glue pci driver for the Synopsys G210 Test Chip.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>

Mostly ok, just a few suggestions:

> +
> +/* Test Chip type expected values */
> +#define TC_G210_20BIT 20
> +#define TC_G210_40BIT 40
> +#define TC_G210_DEFAULTBIT 40
> +
> +static int tc_type = TC_G210_DEFAULTBIT;
> +module_param(tc_type, int, 0);
> +MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)");
>

What is the effect of setting the wrong one here? I was thinking
it would be best to have the default be 'invalid' and then return
an error from the probe() function when you neither value is
set.

> +
> +	/* Check Test Chip type and set the specific setup routine */
> +	if (tc_type == TC_G210_20BIT) {
> +		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
> +						tc_dwc_g210_config_20_bit;
> +	} else if (tc_type == TC_G210_40BIT) {
> +		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
> +						tc_dwc_g210_config_40_bit;
> +	}

As for the platform driver, I would define two separate structures here,
and then mark the operations as 'const'.

> +static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
> +	{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
> +	{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
> +	{ }	/* terminate list */
> +};

Is there any difference between these two IDs?

	Arnd

Re: [PATCH v10 6/6] add TC G210 pci driver

[Joao Pinto]

Hi,

On 3/4/2016 9:17 PM, Arnd Bergmann wrote:
> On Friday 04 March 2016 17:22:19 Joao Pinto wrote:
>> This patch adds a glue pci driver for the Synopsys G210 Test Chip.
>>
>> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> 
> Mostly ok, just a few suggestions:
> 
>> +
>> +/* Test Chip type expected values */
>> +#define TC_G210_20BIT 20
>> +#define TC_G210_40BIT 40
>> +#define TC_G210_DEFAULTBIT 40
>> +
>> +static int tc_type = TC_G210_DEFAULTBIT;
>> +module_param(tc_type, int, 0);
>> +MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)");
>>
> 
> What is the effect of setting the wrong one here? I was thinking
> it would be best to have the default be 'invalid' and then return
> an error from the probe() function when you neither value is
> set.

You're right. Maybe an TC_G210_20BIT_INV by default and also check if the
inserted value is TC_G210_20BIT or TC_G210_40BIT. if not, then abort the probe.

> 
>> +
>> +	/* Check Test Chip type and set the specific setup routine */
>> +	if (tc_type == TC_G210_20BIT) {
>> +		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
>> +						tc_dwc_g210_config_20_bit;
>> +	} else if (tc_type == TC_G210_40BIT) {
>> +		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
>> +						tc_dwc_g210_config_40_bit;
>> +	}
> 
> As for the platform driver, I would define two separate structures here,
> and then mark the operations as 'const'.
> 
>> +static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
>> +	{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
>> +	{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
>> +	{ }	/* terminate list */
>> +};
> 
> Is there any difference between these two IDs?

The Synopsys can be identified by one of these 2 IDs. There is no particular reason.

> 
> 	Arnd
> 

Joao

[PATCH v11 5/6] add TC G210 platform driver

[Joao Pinto]

This patch adds a glue platform driver for the Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v10->v11 (Arnd Bergmann):
- vops structs are now passed in .data
Changes v0->v10:
- This patch only appeared in v10

 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 +++++
 drivers/scsi/ufs/Kconfig                           |   9 ++
 drivers/scsi/ufs/Makefile                          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 113 +++++++++++++++++++++
 4 files changed, 149 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c

diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
new file mode 100644
index 0000000..6ec9647
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
@@ -0,0 +1,26 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible	: compatible list must contain the PHY type & version:
+			"snps, g210-tc-6.00-20bit"
+			"snps, g210-tc-6.00-40bit"
+		  complemented with the Controller IP version:
+			"snps, dwc-ufshcd-1.40a"
+		  complemented with the JEDEC version:
+			"jedec,ufs-1.1"
+			"jedec,ufs-2.0"
+
+- reg		: <registers mapping>
+- interrupts	: <interrupt mapping for UFS host controller IRQ>
+
+Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
+	dwc_ufs@d0000000 {
+		compatible = "snps, g210-tc-6.00-40bit",
+			     "snps, dwc-ufshcd-1.40a",
+			     "jedec,ufs-2.0";
+		reg = < 0xd0000000 0x10000 >;
+		interrupts = < 24 >;
+	};
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 9d218f9..5cfa87b 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -90,3 +90,12 @@ config SCSI_UFS_DWC
 config SCSI_UFS_DWC_TC
 	bool
 	select SCSI_UFS_DWC
+
+config SCSI_UFS_DWC_TC_PLATFORM
+	tristate "DesignWare platform support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PLATFORM
+	select SCSI_UFS_DWC_TC
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N."
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 9468d7b..a977fe0 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,6 +1,7 @@
 # UFSHCD makefile
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
new file mode 100644
index 0000000..9bffb98
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
@@ -0,0 +1,113 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#include "ufshcd-pltfrm.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+/**
+ * UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_20bit_pltfm_hba_vops = {
+	.name                   = "tc-dwc-g210-pltfm",
+	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
+	.custom_phy_initialization = tc_dwc_g210_config_20_bit,
+};
+
+static struct ufs_hba_variant_ops tc_dwc_g210_40bit_pltfm_hba_vops = {
+	.name                   = "tc-dwc-g210-pltfm",
+	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
+	.custom_phy_initialization = tc_dwc_g210_config_40_bit,
+};
+
+static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
+	{
+		.compatible = "snps, g210-tc-6.00-20bit",
+		.data = &tc_dwc_g210_20bit_pltfm_hba_vops,
+	},
+	{
+		.compatible = "snps, g210-tc-6.00-40bit",
+		.data = &tc_dwc_g210_40bit_pltfm_hba_vops,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tc_dwc_g210_pltfm_match);
+
+/**
+ * tc_dwc_g210_pltfm_probe()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_probe(struct platform_device *pdev)
+{
+	int err;
+	const struct of_device_id *of_id;
+	struct ufs_hba_variant_ops *vops;
+	struct device *dev = &pdev->dev;
+
+        of_id = of_match_node(tc_dwc_g210_pltfm_match, dev->of_node);
+        vops = (struct ufs_hba_variant_ops *)of_id->data;
+
+	/* Perform generic probe */
+	err = ufshcd_pltfrm_init(pdev, vops);
+	if (err)
+		dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+	return err;
+}
+
+/**
+ * tc_dwc_g210_pltfm_remove()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int tc_dwc_g210_pltfm_remove(struct platform_device *pdev)
+{
+	struct ufs_hba *hba =  platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&(pdev)->dev);
+	ufshcd_remove(hba);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tc_dwc_g210_pltfm_pm_ops = {
+	.suspend	= ufshcd_pltfrm_suspend,
+	.resume		= ufshcd_pltfrm_resume,
+	.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+	.runtime_resume  = ufshcd_pltfrm_runtime_resume,
+	.runtime_idle    = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver tc_dwc_g210_pltfm_driver = {
+	.probe		= tc_dwc_g210_pltfm_probe,
+	.remove		= tc_dwc_g210_pltfm_remove,
+	.shutdown = ufshcd_pltfrm_shutdown,
+	.driver		= {
+		.name	= "tc-dwc-g210-pltfm",
+		.pm	= &tc_dwc_g210_pltfm_pm_ops,
+		.of_match_table	= of_match_ptr(tc_dwc_g210_pltfm_match),
+	},
+};
+
+module_platform_driver(tc_dwc_g210_pltfm_driver);
+
+MODULE_ALIAS("platform:tc-dwc-g210-pltfm");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 platform glue driver");
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
1.8.1.5

Re: [PATCH v11 5/6] add TC G210 platform driver

[Rob Herring]

On Mon, Mar 07, 2016 at 12:09:20PM +0000, Joao Pinto wrote:
> This patch adds a glue platform driver for the Synopsys G210 Test Chip.
> 
> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
> ---
> Changes v10->v11 (Arnd Bergmann):
> - vops structs are now passed in .data
> Changes v0->v10:
> - This patch only appeared in v10
> 
>  .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 +++++
>  drivers/scsi/ufs/Kconfig                           |   9 ++
>  drivers/scsi/ufs/Makefile                          |   1 +
>  drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 113 +++++++++++++++++++++
>  4 files changed, 149 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
>  create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
> 
> diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
> new file mode 100644
> index 0000000..6ec9647
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
> @@ -0,0 +1,26 @@
> +* Universal Flash Storage (UFS) DesignWare Host Controller
> +
> +DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
> +Each UFS controller instance should have its own node.
> +
> +Required properties:
> +- compatible	: compatible list must contain the PHY type & version:
> +			"snps, g210-tc-6.00-20bit"
> +			"snps, g210-tc-6.00-40bit"
drop the spaces               ^


> +		  complemented with the Controller IP version:
> +			"snps, dwc-ufshcd-1.40a"

ditto

> +		  complemented with the JEDEC version:
> +			"jedec,ufs-1.1"
> +			"jedec,ufs-2.0"
> +
> +- reg		: <registers mapping>
> +- interrupts	: <interrupt mapping for UFS host controller IRQ>
> +
> +Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
> +	dwc_ufs@d0000000 {
> +		compatible = "snps, g210-tc-6.00-40bit",
> +			     "snps, dwc-ufshcd-1.40a",

ditto

> +			     "jedec,ufs-2.0";
> +		reg = < 0xd0000000 0x10000 >;
> +		interrupts = < 24 >;
> +	};

[PATCH v11 6/6] add-TC-G210-pci-driver

[Joao Pinto]

This patch adds a glue pci driver for the Synopsys G210 Test Chip.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
---
Changes v10->v11 (Arnd Bergmann):
- tc_type is now initialized to TC_G210_INV
- probe function checks if the test chip version is specified
Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/Kconfig           |   9 ++
 drivers/scsi/ufs/Makefile          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c | 181 +++++++++++++++++++++++++++++++++++++
 3 files changed, 191 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5cfa87b..5a3fde7 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -99,3 +99,12 @@ config SCSI_UFS_DWC_TC_PLATFORM
 	  Synopsys Test Chip is a PHY for prototyping purposes.
 
 	  If unsure, say N."
+
+config SCSI_UFS_DWC_TC_PCI
+	tristate "DesignWare pci support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PCI
+	select SCSI_UFS_DWC_TC
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N."
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index a977fe0..5303d85 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
new file mode 100644
index 0000000..be8790f
--- /dev/null
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -0,0 +1,181 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "ufshcd-dwc.h"
+#include "tc-dwc-g210.h"
+
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+
+/* Test Chip type expected values */
+#define TC_G210_20BIT 20
+#define TC_G210_40BIT 40
+#define TC_G210_INV 0
+
+static int tc_type = TC_G210_INV;
+module_param(tc_type, int, 0);
+MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)");
+
+static int tc_dwc_g210_pci_suspend(struct device *dev)
+{
+	return ufshcd_system_suspend(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_resume(struct device *dev)
+{
+	return ufshcd_system_resume(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_suspend(struct device *dev)
+{
+	return ufshcd_runtime_suspend(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_resume(struct device *dev)
+{
+	return ufshcd_runtime_resume(dev_get_drvdata(dev));
+}
+
+static int tc_dwc_g210_pci_runtime_idle(struct device *dev)
+{
+	return ufshcd_runtime_idle(dev_get_drvdata(dev));
+}
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = {
+	.name                   = "tc-dwc-g210-pci",
+	.link_startup_notify	= ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * tc_dwc_g210_pci_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev)
+{
+	ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+/**
+ * tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space
+ *		data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void tc_dwc_g210_pci_remove(struct pci_dev *pdev)
+{
+	struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	ufshcd_remove(hba);
+}
+
+/**
+ * tc_dwc_g210_pci_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int
+tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct ufs_hba *hba;
+	void __iomem *mmio_base;
+	int err;
+
+	/* Check Test Chip type and set the specific setup routine */
+	if (tc_type == TC_G210_20BIT) {
+		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_20_bit;
+	} else if (tc_type == TC_G210_40BIT) {
+		tc_dwc_g210_pci_hba_vops.custom_phy_initialization =
+						tc_dwc_g210_config_40_bit;
+	} else {
+		dev_err(&pdev->dev, "test chip version not specified\n");
+		return -EPERM;
+	}
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pcim_enable_device failed\n");
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD);
+	if (err < 0) {
+		dev_err(&pdev->dev, "request and iomap failed\n");
+		return err;
+	}
+
+	mmio_base = pcim_iomap_table(pdev)[0];
+
+	err = ufshcd_alloc_host(&pdev->dev, &hba);
+	if (err) {
+		dev_err(&pdev->dev, "Allocation failed\n");
+		return err;
+	}
+
+	INIT_LIST_HEAD(&hba->clk_list_head);
+
+	hba->vops = &tc_dwc_g210_pci_hba_vops;
+
+	err = ufshcd_init(hba, mmio_base, pdev->irq);
+	if (err) {
+		dev_err(&pdev->dev, "Initialization failed\n");
+		return err;
+	}
+
+	pci_set_drvdata(pdev, hba);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
+	.suspend	= tc_dwc_g210_pci_suspend,
+	.resume		= tc_dwc_g210_pci_resume,
+	.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
+	.runtime_resume  = tc_dwc_g210_pci_runtime_resume,
+	.runtime_idle    = tc_dwc_g210_pci_runtime_idle,
+};
+
+static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
+	{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ }	/* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl);
+
+static struct pci_driver tc_dwc_g210_pci_driver = {
+	.name = UFSHCD,
+	.id_table = tc_dwc_g210_pci_tbl,
+	.probe = tc_dwc_g210_pci_probe,
+	.remove = tc_dwc_g210_pci_remove,
+	.shutdown = tc_dwc_g210_pci_shutdown,
+	.driver = {
+		.pm = &tc_dwc_g210_pci_pm_ops
+	},
+};
+
+module_pci_driver(tc_dwc_g210_pci_driver);
+
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
1.8.1.5