From: Cathy Avery <cavery@redhat.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>, devel@linuxdriverproject.org
Cc: linux-kernel@vger.kernel.org,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Alex Ng <alexng@microsoft.com>, Radim Krcmar <rkrcmar@redhat.com>
Subject: Re: [PATCH v2] Drivers: hv: kvp: fix IP Failover
Date: Wed, 30 Mar 2016 08:21:15 -0400 [thread overview]
Message-ID: <56FBC4BB.2040206@redhat.com> (raw)
In-Reply-To: <1459254631-20185-1-git-send-email-vkuznets@redhat.com>
On 03/29/2016 08:30 AM, Vitaly Kuznetsov wrote:
> Hyper-V VMs can be replicated to another hosts and there is a feature to
> set different IP for replicas, it is called 'Failover TCP/IP'. When
> such guest starts Hyper-V host sends it KVP_OP_SET_IP_INFO message as soon
> as we finish negotiation procedure. The problem is that it can happen (and
> it actually happens) before userspace daemon connects and we reply with
> HV_E_FAIL to the message. As there are no repetitions we fail to set the
> requested IP.
>
> Solve the issue by postponing our reply to the negotiation message till
> userspace daemon is connected. We can't wait too long as there is a
> host-side timeout (cca. 75 seconds) and if we fail to reply in this time
> frame the whole KVP service will become inactive. The solution is not
> ideal - if it takes userspace daemon more than 60 seconds to connect
> IP Failover will still fail but I don't see a solution with our current
> separation between kernel and userspace parts.
>
> Other two modules (VSS and FCOPY) don't require such delay, leave them
> untouched.
>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
> Changes since v1:
> - Cancel handshake timeout work on module unload.
> ---
> drivers/hv/hv_kvp.c | 31 +++++++++++++++++++++++++++++++
> drivers/hv/hyperv_vmbus.h | 5 +++++
> 2 files changed, 36 insertions(+)
>
> diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
> index 9b9b370..cb1a916 100644
> --- a/drivers/hv/hv_kvp.c
> +++ b/drivers/hv/hv_kvp.c
> @@ -78,9 +78,11 @@ static void kvp_send_key(struct work_struct *dummy);
>
> static void kvp_respond_to_host(struct hv_kvp_msg *msg, int error);
> static void kvp_timeout_func(struct work_struct *dummy);
> +static void kvp_host_handshake_func(struct work_struct *dummy);
> static void kvp_register(int);
>
> static DECLARE_DELAYED_WORK(kvp_timeout_work, kvp_timeout_func);
> +static DECLARE_DELAYED_WORK(kvp_host_handshake_work, kvp_host_handshake_func);
> static DECLARE_WORK(kvp_sendkey_work, kvp_send_key);
>
> static const char kvp_devname[] = "vmbus/hv_kvp";
> @@ -130,6 +132,11 @@ static void kvp_timeout_func(struct work_struct *dummy)
> hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper);
> }
>
> +static void kvp_host_handshake_func(struct work_struct *dummy)
> +{
> + hv_poll_channel(kvp_transaction.recv_channel, hv_kvp_onchannelcallback);
> +}
> +
> static int kvp_handle_handshake(struct hv_kvp_msg *msg)
> {
> switch (msg->kvp_hdr.operation) {
> @@ -154,6 +161,12 @@ static int kvp_handle_handshake(struct hv_kvp_msg *msg)
> pr_debug("KVP: userspace daemon ver. %d registered\n",
> KVP_OP_REGISTER);
> kvp_register(dm_reg_value);
> +
> + /*
> + * If we're still negotiating with the host cancel the timeout
> + * work to not poll the channel twice.
> + */
> + cancel_delayed_work_sync(&kvp_host_handshake_work);
> hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper);
>
> return 0;
> @@ -594,7 +607,22 @@ void hv_kvp_onchannelcallback(void *context)
> struct icmsg_negotiate *negop = NULL;
> int util_fw_version;
> int kvp_srv_version;
> + static enum {NEGO_NOT_STARTED,
> + NEGO_IN_PROGRESS,
> + NEGO_FINISHED} host_negotiatied = NEGO_NOT_STARTED;
>
> + if (host_negotiatied == NEGO_NOT_STARTED &&
> + kvp_transaction.state < HVUTIL_READY) {
> + /*
> + * If userspace daemon is not connected and host is asking
> + * us to negotiate we need to delay to not lose messages.
> + * This is important for Failover IP setting.
> + */
> + host_negotiatied = NEGO_IN_PROGRESS;
> + schedule_delayed_work(&kvp_host_handshake_work,
> + HV_UTIL_NEGO_TIMEOUT * HZ);
> + return;
> + }
> if (kvp_transaction.state > HVUTIL_READY)
> return;
>
> @@ -672,6 +700,8 @@ void hv_kvp_onchannelcallback(void *context)
> vmbus_sendpacket(channel, recv_buffer,
> recvlen, requestid,
> VM_PKT_DATA_INBAND, 0);
> +
> + host_negotiatied = NEGO_FINISHED;
> }
>
> }
> @@ -708,6 +738,7 @@ hv_kvp_init(struct hv_util_service *srv)
> void hv_kvp_deinit(void)
> {
> kvp_transaction.state = HVUTIL_DEVICE_DYING;
> + cancel_delayed_work_sync(&kvp_host_handshake_work);
> cancel_delayed_work_sync(&kvp_timeout_work);
> cancel_work_sync(&kvp_sendkey_work);
> hvutil_transport_destroy(hvt);
> diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
> index 12321b9..8b07f9c 100644
> --- a/drivers/hv/hyperv_vmbus.h
> +++ b/drivers/hv/hyperv_vmbus.h
> @@ -36,6 +36,11 @@
> #define HV_UTIL_TIMEOUT 30
>
> /*
> + * Timeout for guest-host handshake for services.
> + */
> +#define HV_UTIL_NEGO_TIMEOUT 60
> +
> +/*
> * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
> * is set by CPUID(HVCPUID_VERSION_FEATURES).
> */
Acked-by: Cathy Avery <cavery@redhat.com>
next prev parent reply other threads:[~2016-03-30 12:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 12:30 [PATCH v2] Drivers: hv: kvp: fix IP Failover Vitaly Kuznetsov
2016-03-30 12:21 ` Cathy Avery [this message]
2016-03-30 12:33 ` Cathy Avery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56FBC4BB.2040206@redhat.com \
--to=cavery@redhat.com \
--cc=alexng@microsoft.com \
--cc=devel@linuxdriverproject.org \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rkrcmar@redhat.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox