Re: [PATCH v4 0/6] Add pinctrl support for Baytrail

[Cristina Ciocan <cristina.ciocan@intel.com>]

On 01.04.2016 13:56, Cristina Ciocan wrote:
> Add support for pin control (pin muxing and pin configuration) for Baytrail
> platform.
> 
> It follows the design in pinctrl-intel.c, but could not use the
> implementation in pinctrl-intel since there were significant differences:
> 	- gpio pin pads are not ordered
> 	- per group functions: for setting a certain mode, there are groups
> 	that need setting pins with different values; for instance, for
> 	setting USB ULPI pins to GPIO function, pin 2 (GPIO_SUS1) needs
> 	to be set to function 1, wihle all other from the group need to be
> 	set to 0
> 	- communities only need pin base and count as specific data
> 	- irq set type only clears all flags, while the actual type setting
> 	is made in the byt_irq_unmask function, which does not comply with
> 	the intel pinctrl implementation
> 
> Changes from v3:
> 	- fix GPIO_* pin names to match naming conventions used in other
> 	Intel pinctrl drivers
> 
> Changes from v2:
> 	- remove comment for each enumerated pin
> 	- apply pin naming conventions used in other Intel drivers
> 
> Changes from v1:
> 	- fix reg, reg_val and byt_soc_data not used variables warnings
> 
> Cristina Ciocan (6):
>   pinctrl: baytrail: Add pin control data structures
>   pinctrl: baytrail: Add pin control operations
>   pinctrl: baytrail: Update gpio chip operations
>   pinctrl: baytrail: Update irq chip operations
>   pinctrl: baytrail: Register pin control handling
>   pinctrl: baytrail: Add debounce configuration
> 
>  drivers/pinctrl/intel/Kconfig            |    3 +
>  drivers/pinctrl/intel/pinctrl-baytrail.c | 1690 +++++++++++++++++++++++++-----
>  2 files changed, 1444 insertions(+), 249 deletions(-)
> 
> --
> 1.9.1
> 

Sorry, sent double set of patches by mistache. Resent the good series
afterwards.