From: Can Guo <cang@codeaurora.org>
To: Ziqi Chen <ziqichen@codeaurora.org>
Cc: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
hongwus@codeaurora.org, rnayak@codeaurora.org,
vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
kernel-team@android.com, saravanak@google.com,
salyzyn@google.com, kwmad.kim@samsung.com,
stanley.chu@mediatek.com, Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Bean Huo <beanhuo@micron.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 1/2] scsi: ufs: Fix ufs clk specs violation
Date: Fri, 08 Jan 2021 16:23:09 +0800 [thread overview]
Message-ID: <56a0fd934614ed4feb476360f8b2c461@codeaurora.org> (raw)
In-Reply-To: <1610090885-50099-2-git-send-email-ziqichen@codeaurora.org>
On 2021-01-08 15:28, Ziqi Chen wrote:
> As per specs, e.g, JESD220E chapter 7.2, while powering
> off/on the ufs device, REF_CLK signal should be between
> VSS(Ground) and VCCQ/VCCQ2.
>
> Signed-off-by: Ziqi Chen <ziqichen@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
> ---
> drivers/scsi/ufs/ufshcd.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index e221add..3f807f7 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8686,8 +8686,6 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> if (ret)
> goto set_dev_active;
>
> - ufshcd_vreg_set_lpm(hba);
> -
> disable_clks:
> /*
> * Call vendor specific suspend callback. As these callbacks may
> access
> @@ -8711,6 +8709,8 @@ static int ufshcd_suspend(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> hba->clk_gating.state);
> }
>
> + ufshcd_vreg_set_lpm(hba);
> +
> /* Put the host controller in low power mode if possible */
> ufshcd_hba_vreg_set_lpm(hba);
> goto out;
> @@ -8778,18 +8778,18 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> old_link_state = hba->uic_link_state;
>
> ufshcd_hba_vreg_set_hpm(hba);
> + ret = ufshcd_vreg_set_hpm(hba);
> + if (ret)
> + goto out;
> +
> /* Make sure clocks are enabled before accessing controller */
> ret = ufshcd_setup_clocks(hba, true);
> if (ret)
> - goto out;
> + goto disable_vreg;
>
> /* enable the host irq as host controller would be active soon */
> ufshcd_enable_irq(hba);
>
> - ret = ufshcd_vreg_set_hpm(hba);
> - if (ret)
> - goto disable_irq_and_vops_clks;
> -
> /*
> * Call vendor specific resume callback. As these callbacks may
> access
> * vendor specific host controller register space call them when the
> @@ -8797,7 +8797,7 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> */
> ret = ufshcd_vops_resume(hba, pm_op);
> if (ret)
> - goto disable_vreg;
> + goto disable_irq_and_vops_clks;
>
> /* For DeepSleep, the only supported option is to have the link off
> */
> WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) &&
> !ufshcd_is_link_off(hba));
> @@ -8864,8 +8864,6 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> ufshcd_link_state_transition(hba, old_link_state, 0);
> vendor_suspend:
> ufshcd_vops_suspend(hba, pm_op);
> -disable_vreg:
> - ufshcd_vreg_set_lpm(hba);
> disable_irq_and_vops_clks:
> ufshcd_disable_irq(hba);
> if (hba->clk_scaling.is_allowed)
> @@ -8876,6 +8874,8 @@ static int ufshcd_resume(struct ufs_hba *hba,
> enum ufs_pm_op pm_op)
> trace_ufshcd_clk_gating(dev_name(hba->dev),
> hba->clk_gating.state);
> }
> +disable_vreg:
> + ufshcd_vreg_set_lpm(hba);
> out:
> hba->pm_op_in_progress = 0;
> if (ret)
next prev parent reply other threads:[~2021-01-08 8:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1610090885-50099-1-git-send-email-ziqichen@codeaurora.org>
2021-01-08 7:28 ` [PATCH v5 1/2] scsi: ufs: Fix ufs clk specs violation Ziqi Chen
2021-01-08 8:23 ` Can Guo [this message]
2021-01-08 7:28 ` [PATCH v5 2/2] scsi: ufs-qcom: Fix ufs RST_n " Ziqi Chen
2021-01-08 8:05 ` Can Guo
2021-01-08 8:15 ` ziqichen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56a0fd934614ed4feb476360f8b2c461@codeaurora.org \
--to=cang@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=hongwus@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=kernel-team@android.com \
--cc=kwmad.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nguyenb@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=salyzyn@google.com \
--cc=saravanak@google.com \
--cc=stanley.chu@mediatek.com \
--cc=vinholikatti@gmail.com \
--cc=ziqichen@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox