public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Chen Feng <puck.chen@hisilicon.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: <lgirdwood@gmail.com>, <broonie@kernel.org>,
	<linux-kernel@vger.kernel.org>, <w.f@huawei.com>,
	<kong.kongxinwei@hisilicon.com>, <haojian.zhuang@linaro.org>,
	<suzhuangluan@hisilicon.com>, <dan.zhao@hisilicon.com>
Subject: Re: [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core
Date: Mon, 11 Apr 2016 16:41:28 +0800	[thread overview]
Message-ID: <570B6338.3000006@hisilicon.com> (raw)
In-Reply-To: <20160411081446.GC4592@x1>

Hi lee,

Mark already took the regulator set.

Please help take the mfd part.
mfd: hi655x: Add document for mfd hi665x PMIC
and
mfd: hi655x: Add MFD driver for hi655x

thanks a lot.

On 2016/4/11 16:14, Lee Jones wrote:
> On Sun, 14 Feb 2016, Chen Feng wrote:
> 
>> The patch sets add support for Hi6220 PMIC Hi655x MFD core and its
>> regulator driver.
>> Current testing and support board is Hikey which is one of 96boards.
>> It is an arm64 open source board. For more information about this board,
>> please access https://www.96boards.org.
>>
>> This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>> Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>> We can use memory-mapped I/O to communicate.
>>
>> +----------------+             +-------------+
>> |                |             |             |
>> |    Hi6220      |   SSI bus   |   Hi655x    |
>> |                |-------------|             |
>> |                |(REGMAP_MMIO)|             |
>> +----------------+             +-------------+
>>
>> V2: Code refactoring of regulator.
>>
>> V3: Drop mtcmos from this patch and use regmap-irq.
>>
>> V4: Move the vset-table to driver code and donot open code for it.
>>
>> V5: Use regulators_node and of_match, donot open code fot it.
>>
>> V7: Change the constraints into hikey.dts and fix code in PMIC.
>>
>> V8: Change format in document, and fix bit mask in regulator.
>>
>> Chen Feng (5):
>>   mfd: hi655x: Add document for mfd hi665x PMIC
>>   regulator: hi655x: Document for hi655x regulator
>>   mfd: hi655x: Add MFD driver for hi655x
>>   regulator: hi655x: enable regulator for hi655x PMIC
>>   arm64: dts: hisilicon: Add hi655x pmic dts node
> 
> So what's going on with this set?  Can the MFD patches go in via my
> tree on their own?  Or are there dependencies between them and the
> Regulator changes?  If the latter, then we need Mark's Ack to
> proceed.
> 
>>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
>>  .../regulator/hisilicon,hi655x-regulator.txt       |  29 +++
>>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
>>  drivers/mfd/Kconfig                                |  10 +
>>  drivers/mfd/Makefile                               |   1 +
>>  drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
>>  drivers/regulator/Kconfig                          |   8 +
>>  drivers/regulator/Makefile                         |   1 +
>>  drivers/regulator/hi655x-regulator.c               | 227 +++++++++++++++++++++
>>  include/linux/mfd/hi655x-pmic.h                    |  55 +++++
>>  10 files changed, 607 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>  create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
>>  create mode 100644 drivers/mfd/hi655x-pmic.c
>>  create mode 100644 drivers/regulator/hi655x-regulator.c
>>  create mode 100644 include/linux/mfd/hi655x-pmic.h
>>
> 

      reply	other threads:[~2016-04-11  8:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-14  6:29 [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng
2016-02-14  6:29 ` [PATCH v8 1/5] mfd: hi655x: Add document for mfd hi665x PMIC Chen Feng
2016-02-15  8:32   ` Lee Jones
2016-02-16  1:21     ` Chen Feng
2016-02-27  8:36       ` Wei Xu
2016-04-11 10:40   ` Lee Jones
2016-02-14  6:29 ` [PATCH v8 2/5] regulator: hi655x: Document for hi655x regulator Chen Feng
2016-02-14  6:29 ` [PATCH v8 3/5] mfd: hi655x: Add MFD driver for hi655x Chen Feng
2016-04-11 10:41   ` Lee Jones
     [not found]     ` <570D982C.6090307@hisilicon.com>
2016-04-19  3:25       ` Guodong Xu
2016-04-19  6:53         ` Lee Jones
2016-04-19  6:57           ` Guodong Xu
2016-05-18  3:14           ` Guodong Xu
2016-02-14  6:29 ` [PATCH v8 4/5] regulator: hi655x: enable regulator for hi655x PMIC Chen Feng
2016-02-14  6:29 ` [PATCH v8 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node Chen Feng
2016-04-11  8:14 ` [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Lee Jones
2016-04-11  8:41   ` Chen Feng [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570B6338.3000006@hisilicon.com \
    --to=puck.chen@hisilicon.com \
    --cc=broonie@kernel.org \
    --cc=dan.zhao@hisilicon.com \
    --cc=haojian.zhuang@linaro.org \
    --cc=kong.kongxinwei@hisilicon.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=suzhuangluan@hisilicon.com \
    --cc=w.f@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox