* [RESPIN v2 1/6] dt-bindings: EXYNOS: Add exynos-srom device tree binding
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 2/6] memory: Add support for Exynos SROM driver Pankaj Dubey
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey,
Rob Herring, Mark Rutland, Ian Campbell, Kukjin Kim
This patch adds exynos-srom binding information for SROM Controller
driver on Exynos SoCs. Documentation for new subnode properties,
allowing bank configuration are added based on u-boot implementation,
but heavily reworked.
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
[p.fedin: Added SROMc configuration description and fixed SROMc mapping]
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
.../bindings/memory-controllers/exynos-srom.txt | 79 ++++++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
new file mode 100644
index 0000000..f633b5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.txt
@@ -0,0 +1,79 @@
+SAMSUNG Exynos SoCs SROM Controller driver.
+
+Required properties:
+- compatible : Should contain "samsung,exynos4210-srom".
+
+- reg: offset and length of the register set
+
+Optional properties:
+The SROM controller can be used to attach external peripherals. In this case
+extra properties, describing the bus behind it, should be specified as below:
+
+- #address-cells: Must be set to 2 to allow device address translation.
+ Address is specified as (bank#, offset).
+
+- #size-cells: Must be set to 1 to allow device size passing
+
+- ranges: Must be set up to reflect the memory layout with four integer values
+ per bank:
+ <bank-number> 0 <parent address of bank> <size>
+
+Sub-nodes:
+The actual device nodes should be added as subnodes to the SROMc node. These
+subnodes, in addition to regular device specification, should contain the following
+properties, describing configuration of the relevant SROM bank:
+
+Required properties:
+- reg: bank number, base address (relative to start of the bank) and size of
+ the memory mapped for the device. Note that base address will be
+ typically 0 as this is the start of the bank.
+
+- samsung,srom-timing : array of 6 integers, specifying bank timings in the
+ following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+ Each value is specified in cycles and has the following
+ meaning and valid range:
+ Tacp : Page mode access cycle at Page mode (0 - 15)
+ Tcah : Address holding time after CSn (0 - 15)
+ Tcoh : Chip selection hold on OEn (0 - 15)
+ Tacc : Access cycle (0 - 31, the actual time is N + 1)
+ Tcos : Chip selection set-up before OEn (0 - 15)
+ Tacs : Address set-up before CSn (0 - 15)
+
+Optional properties:
+- reg-io-width : data width in bytes (1 or 2). If omitted, default of 1 is used.
+
+- samsung,srom-page-mode : if page mode is set, 4 data page mode will be configured,
+ else normal (1 data) page mode will be set.
+
+Example: basic definition, no banks are configured
+ memory-controller@12570000 {
+ compatible = "samsung,exynos4210-srom";
+ reg = <0x12570000 0x14>;
+ };
+
+Example: SROMc with SMSC911x ethernet chip on bank 3
+ memory-controller@12570000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000 // Bank0
+ 1 0 0x05000000 0x20000 // Bank1
+ 2 0 0x06000000 0x20000 // Bank2
+ 3 0 0x07000000 0x20000>; // Bank3
+
+ compatible = "samsung,exynos4210-srom";
+ reg = <0x12570000 0x14>;
+
+ ethernet@3,0 {
+ compatible = "smsc,lan9115";
+ reg = <3 0 0x10000>; // Bank 3, offset = 0
+ phy-mode = "mii";
+ interrupt-parent = <&gpx0>;
+ interrupts = <5 8>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ smsc,force-internal-phy;
+
+ samsung,srom-page-mode;
+ samsung,srom-timing = <9 12 1 9 1 1>;
+ };
+ };
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RESPIN v2 2/6] memory: Add support for Exynos SROM driver
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 1/6] dt-bindings: EXYNOS: Add exynos-srom device tree binding Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 3/6] MAINTAINERS: Add maintainers entry for drivers/memory/samsung Pankaj Dubey
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey,
Kukjin Kim
This patch adds Exynos SROM controller driver which will handle
save restore of SROM registers during S2R.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[p.fedin@samsung.com: tested on SMDK5410]
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
[k.kozlowski: Minor COMPILE_TEST adjustments in Kconfig entries]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/memory/Kconfig | 1 +
drivers/memory/Makefile | 1 +
drivers/memory/samsung/Kconfig | 13 +++
drivers/memory/samsung/Makefile | 1 +
drivers/memory/samsung/exynos-srom.c | 175 +++++++++++++++++++++++++++++++++++
drivers/memory/samsung/exynos-srom.h | 51 ++++++++++
6 files changed, 242 insertions(+)
create mode 100644 drivers/memory/samsung/Kconfig
create mode 100644 drivers/memory/samsung/Makefile
create mode 100644 drivers/memory/samsung/exynos-srom.c
create mode 100644 drivers/memory/samsung/exynos-srom.h
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 51d5cd2..c61a284 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -122,6 +122,7 @@ config MTK_SMI
mainly help enable/disable iommu and control the power domain and
clocks for each local arbiter.
+source "drivers/memory/samsung/Kconfig"
source "drivers/memory/tegra/Kconfig"
endif
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 890bdf4..cb0b7a1 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -17,4 +17,5 @@ obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
obj-$(CONFIG_MTK_SMI) += mtk-smi.o
+obj-$(CONFIG_SAMSUNG_MC) += samsung/
obj-$(CONFIG_TEGRA_MC) += tegra/
diff --git a/drivers/memory/samsung/Kconfig b/drivers/memory/samsung/Kconfig
new file mode 100644
index 0000000..64ab5dd
--- /dev/null
+++ b/drivers/memory/samsung/Kconfig
@@ -0,0 +1,13 @@
+config SAMSUNG_MC
+ bool "Samsung Exynos Memory Controller support" if COMPILE_TEST
+ help
+ Support for the Memory Controller (MC) devices found on
+ Samsung Exynos SoCs.
+
+if SAMSUNG_MC
+
+config EXYNOS_SROM
+ bool "Exynos SROM controller driver" if COMPILE_TEST
+ depends on (ARM && ARCH_EXYNOS && PM) || (COMPILE_TEST && HAS_IOMEM)
+
+endif
diff --git a/drivers/memory/samsung/Makefile b/drivers/memory/samsung/Makefile
new file mode 100644
index 0000000..9c554d5
--- /dev/null
+++ b/drivers/memory/samsung/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_EXYNOS_SROM) += exynos-srom.o
diff --git a/drivers/memory/samsung/exynos-srom.c b/drivers/memory/samsung/exynos-srom.c
new file mode 100644
index 0000000..68e073c
--- /dev/null
+++ b/drivers/memory/samsung/exynos-srom.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS - SROM Controller support
+ * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "exynos-srom.h"
+
+static const unsigned long exynos_srom_offsets[] = {
+ /* SROM side */
+ EXYNOS_SROM_BW,
+ EXYNOS_SROM_BC0,
+ EXYNOS_SROM_BC1,
+ EXYNOS_SROM_BC2,
+ EXYNOS_SROM_BC3,
+};
+
+/**
+ * struct exynos_srom_reg_dump: register dump of SROM Controller registers.
+ * @offset: srom register offset from the controller base address.
+ * @value: the value of register under the offset.
+ */
+struct exynos_srom_reg_dump {
+ u32 offset;
+ u32 value;
+};
+
+/**
+ * struct exynos_srom: platform data for exynos srom controller driver.
+ * @dev: platform device pointer
+ * @reg_base: srom base address
+ * @reg_offset: exynos_srom_reg_dump pointer to hold offset and its value.
+ */
+struct exynos_srom {
+ struct device *dev;
+ void __iomem *reg_base;
+ struct exynos_srom_reg_dump *reg_offset;
+};
+
+static struct exynos_srom_reg_dump *exynos_srom_alloc_reg_dump(
+ const unsigned long *rdump,
+ unsigned long nr_rdump)
+{
+ struct exynos_srom_reg_dump *rd;
+ unsigned int i;
+
+ rd = kcalloc(nr_rdump, sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return NULL;
+
+ for (i = 0; i < nr_rdump; ++i)
+ rd[i].offset = rdump[i];
+
+ return rd;
+}
+
+static int exynos_srom_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct exynos_srom *srom;
+ struct device *dev = &pdev->dev;
+
+ np = dev->of_node;
+ if (!np) {
+ dev_err(&pdev->dev, "could not find device info\n");
+ return -EINVAL;
+ }
+
+ srom = devm_kzalloc(&pdev->dev,
+ sizeof(struct exynos_srom), GFP_KERNEL);
+ if (!srom)
+ return -ENOMEM;
+
+ srom->dev = dev;
+ srom->reg_base = of_iomap(np, 0);
+ if (!srom->reg_base) {
+ dev_err(&pdev->dev, "iomap of exynos srom controller failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, srom);
+
+ srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets,
+ sizeof(exynos_srom_offsets));
+ if (!srom->reg_offset) {
+ iounmap(srom->reg_base);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int exynos_srom_remove(struct platform_device *pdev)
+{
+ struct exynos_srom *srom = platform_get_drvdata(pdev);
+
+ kfree(srom->reg_offset);
+ iounmap(srom->reg_base);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void exynos_srom_save(void __iomem *base,
+ struct exynos_srom_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ rd->value = readl(base + rd->offset);
+}
+
+static void exynos_srom_restore(void __iomem *base,
+ const struct exynos_srom_reg_dump *rd,
+ unsigned int num_regs)
+{
+ for (; num_regs > 0; --num_regs, ++rd)
+ writel(rd->value, base + rd->offset);
+}
+
+static int exynos_srom_suspend(struct device *dev)
+{
+ struct exynos_srom *srom = dev_get_drvdata(dev);
+
+ exynos_srom_save(srom->reg_base, srom->reg_offset,
+ ARRAY_SIZE(exynos_srom_offsets));
+ return 0;
+}
+
+static int exynos_srom_resume(struct device *dev)
+{
+ struct exynos_srom *srom = dev_get_drvdata(dev);
+
+ exynos_srom_restore(srom->reg_base, srom->reg_offset,
+ ARRAY_SIZE(exynos_srom_offsets));
+ return 0;
+}
+#endif
+
+static const struct of_device_id of_exynos_srom_ids[] = {
+ {
+ .compatible = "samsung,exynos4210-srom",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_exynos_srom_ids);
+
+static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
+
+static struct platform_driver exynos_srom_driver = {
+ .probe = exynos_srom_probe,
+ .remove = exynos_srom_remove,
+ .driver = {
+ .name = "exynos-srom",
+ .of_match_table = of_exynos_srom_ids,
+ .pm = &exynos_srom_pm_ops,
+ },
+};
+module_platform_driver(exynos_srom_driver);
+
+MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
+MODULE_DESCRIPTION("Exynos SROM Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/memory/samsung/exynos-srom.h b/drivers/memory/samsung/exynos-srom.h
new file mode 100644
index 0000000..34660c6
--- /dev/null
+++ b/drivers/memory/samsung/exynos-srom.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Exynos SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __EXYNOS_SROM_H
+#define __EXYNOS_SROM_H __FILE__
+
+#define EXYNOS_SROMREG(x) (x)
+
+#define EXYNOS_SROM_BW EXYNOS_SROMREG(0x0)
+#define EXYNOS_SROM_BC0 EXYNOS_SROMREG(0x4)
+#define EXYNOS_SROM_BC1 EXYNOS_SROMREG(0x8)
+#define EXYNOS_SROM_BC2 EXYNOS_SROMREG(0xc)
+#define EXYNOS_SROM_BC3 EXYNOS_SROMREG(0x10)
+#define EXYNOS_SROM_BC4 EXYNOS_SROMREG(0x14)
+#define EXYNOS_SROM_BC5 EXYNOS_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define EXYNOS_SROM_BW__DATAWIDTH__SHIFT 0
+#define EXYNOS_SROM_BW__ADDRMODE__SHIFT 1
+#define EXYNOS_SROM_BW__WAITENABLE__SHIFT 2
+#define EXYNOS_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define EXYNOS_SROM_BW__CS_MASK 0xf
+
+#define EXYNOS_SROM_BW__NCS0__SHIFT 0
+#define EXYNOS_SROM_BW__NCS1__SHIFT 4
+#define EXYNOS_SROM_BW__NCS2__SHIFT 8
+#define EXYNOS_SROM_BW__NCS3__SHIFT 12
+#define EXYNOS_SROM_BW__NCS4__SHIFT 16
+#define EXYNOS_SROM_BW__NCS5__SHIFT 20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define EXYNOS_SROM_BCX__PMC__SHIFT 0
+#define EXYNOS_SROM_BCX__TACP__SHIFT 4
+#define EXYNOS_SROM_BCX__TCAH__SHIFT 8
+#define EXYNOS_SROM_BCX__TCOH__SHIFT 12
+#define EXYNOS_SROM_BCX__TACC__SHIFT 16
+#define EXYNOS_SROM_BCX__TCOS__SHIFT 24
+#define EXYNOS_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __EXYNOS_SROM_H */
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RESPIN v2 3/6] MAINTAINERS: Add maintainers entry for drivers/memory/samsung
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 1/6] dt-bindings: EXYNOS: Add exynos-srom device tree binding Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 2/6] memory: Add support for Exynos SROM driver Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 4/6] ARM: EXYNOS: Remove SROM related register settings from mach-exynos Pankaj Dubey
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey
Add maintainers entry for new driver folder drivers/memory/samsung.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 03e00c7..0d2a264 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1540,6 +1540,7 @@ F: arch/arm/mach-s5p*/
F: arch/arm/mach-exynos*/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
+F: drivers/memory/samsung/*
F: drivers/soc/samsung/*
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RESPIN v2 4/6] ARM: EXYNOS: Remove SROM related register settings from mach-exynos
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
` (2 preceding siblings ...)
2016-04-11 7:42 ` [RESPIN v2 3/6] MAINTAINERS: Add maintainers entry for drivers/memory/samsung Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 5/6] memory: samsung: exynos-srom: Add support for bank configuration Pankaj Dubey
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey,
Kukjin Kim
As now we have dedicated driver for SROM controller, it will take care
of saving register banks during S2R so we can safely remove these
settings from mach-exynos.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
[k.kozlowski: Need to select also SAMSUNG_MC]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 3 ++
arch/arm/mach-exynos/exynos.c | 17 ---------
arch/arm/mach-exynos/include/mach/map.h | 3 --
arch/arm/mach-exynos/regs-srom.h | 53 ----------------------------
arch/arm/mach-exynos/suspend.c | 20 ++---------
arch/arm/plat-samsung/include/plat/map-s5p.h | 1 -
6 files changed, 5 insertions(+), 92 deletions(-)
delete mode 100644 arch/arm/mach-exynos/regs-srom.h
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 207fa2c..28f9928 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -18,6 +18,7 @@ menuconfig ARCH_EXYNOS
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
select EXYNOS_PMU
+ select EXYNOS_SROM if PM
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -26,11 +27,13 @@ menuconfig ARCH_EXYNOS
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_DEV_MFC
+ select SAMSUNG_MC
select SOC_SAMSUNG
select SRAM
select THERMAL
select THERMAL_OF
select MFD_SYSCON
+ select MEMORY
select CLKSRC_EXYNOS_MCT
select POWER_RESET
select POWER_RESET_SYSCON
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bbf51a4..f977eea 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -31,11 +31,6 @@
static struct map_desc exynos4_iodesc[] __initdata = {
{
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -58,15 +53,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
},
};
-static struct map_desc exynos5_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -138,9 +124,6 @@ static void __init exynos_map_io(void)
{
if (soc_is_exynos4())
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos5())
- iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
static void __init exynos_init_io(void)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c88325d..c48ba4f 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -25,7 +25,4 @@
#define EXYNOS4_PA_COREPERI 0x10500000
-#define EXYNOS4_PA_SROMC 0x12570000
-#define EXYNOS5_PA_SROMC 0x12250000
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/regs-srom.h b/arch/arm/mach-exynos/regs-srom.h
deleted file mode 100644
index 5c4d442..0000000
--- a/arch/arm/mach-exynos/regs-srom.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_REGS_SROM_H
-#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x) (S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW S5P_SROMREG(0x0)
-#define S5P_SROM_BC0 S5P_SROMREG(0x4)
-#define S5P_SROM_BC1 S5P_SROMREG(0x8)
-#define S5P_SROM_BC2 S5P_SROMREG(0xc)
-#define S5P_SROM_BC3 S5P_SROMREG(0x10)
-#define S5P_SROM_BC4 S5P_SROMREG(0x14)
-#define S5P_SROM_BC5 S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT 0
-#define S5P_SROM_BW__ADDRMODE__SHIFT 1
-#define S5P_SROM_BW__WAITENABLE__SHIFT 2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT 3
-
-#define S5P_SROM_BW__CS_MASK 0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT 0
-#define S5P_SROM_BW__NCS1__SHIFT 4
-#define S5P_SROM_BW__NCS2__SHIFT 8
-#define S5P_SROM_BW__NCS3__SHIFT 12
-#define S5P_SROM_BW__NCS4__SHIFT 16
-#define S5P_SROM_BW__NCS5__SHIFT 20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT 0
-#define S5P_SROM_BCX__TACP__SHIFT 4
-#define S5P_SROM_BCX__TCAH__SHIFT 8
-#define S5P_SROM_BCX__TCOH__SHIFT 12
-#define S5P_SROM_BCX__TACC__SHIFT 16
-#define S5P_SROM_BCX__TCOS__SHIFT 24
-#define S5P_SROM_BCX__TACS__SHIFT 28
-
-#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index fee2b00..f216909 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -34,10 +34,11 @@
#include <asm/smp_scu.h>
#include <asm/suspend.h>
+#include <mach/map.h>
+
#include <plat/pm-common.h>
#include "common.h"
-#include "regs-srom.h"
#define REG_TABLE_END (-1U)
@@ -53,15 +54,6 @@ struct exynos_wkup_irq {
u32 mask;
};
-static struct sleep_save exynos_core_save[] = {
- /* SROM side */
- SAVE_ITEM(S5P_SROM_BW),
- SAVE_ITEM(S5P_SROM_BC0),
- SAVE_ITEM(S5P_SROM_BC1),
- SAVE_ITEM(S5P_SROM_BC2),
- SAVE_ITEM(S5P_SROM_BC3),
-};
-
struct exynos_pm_data {
const struct exynos_wkup_irq *wkup_irq;
unsigned int wake_disable_mask;
@@ -343,8 +335,6 @@ static void exynos_pm_prepare(void)
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
@@ -375,8 +365,6 @@ static void exynos5420_pm_prepare(void)
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
/*
* The cpu state needs to be saved and restored so that the
@@ -467,8 +455,6 @@ static void exynos_pm_resume(void)
/* For release retention */
exynos_pm_release_retention();
- s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
if (cpuid == ARM_CPU_PART_CORTEX_A9)
scu_enable(S5P_VA_SCU);
@@ -535,8 +521,6 @@ static void exynos5420_pm_resume(void)
pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
- s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
early_wakeup:
tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index 4ec9a70..b63aeeb 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -18,7 +18,6 @@
#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RESPIN v2 5/6] memory: samsung: exynos-srom: Add support for bank configuration
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
` (3 preceding siblings ...)
2016-04-11 7:42 ` [RESPIN v2 4/6] ARM: EXYNOS: Remove SROM related register settings from mach-exynos Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-11 7:42 ` [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific Pankaj Dubey
2016-04-18 12:30 ` [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Krzysztof Kozlowski
6 siblings, 0 replies; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey
From: Pavel Fedin <p.fedin@samsung.com>
Implement handling properties in subnodes and adding child devices to the
system. Child devices will not be added if configuration fails.
Since the driver now does more than suspend-resume support, dependency on
CONFIG_PM is removed.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 2 +-
drivers/memory/samsung/Kconfig | 2 +-
drivers/memory/samsung/exynos-srom.c | 60 ++++++++++++++++++++++++++++++++++--
3 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 28f9928..e65aa7d 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -18,7 +18,7 @@ menuconfig ARCH_EXYNOS
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
select EXYNOS_PMU
- select EXYNOS_SROM if PM
+ select EXYNOS_SROM
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
diff --git a/drivers/memory/samsung/Kconfig b/drivers/memory/samsung/Kconfig
index 64ab5dd..9de1222 100644
--- a/drivers/memory/samsung/Kconfig
+++ b/drivers/memory/samsung/Kconfig
@@ -8,6 +8,6 @@ if SAMSUNG_MC
config EXYNOS_SROM
bool "Exynos SROM controller driver" if COMPILE_TEST
- depends on (ARM && ARCH_EXYNOS && PM) || (COMPILE_TEST && HAS_IOMEM)
+ depends on (ARM && ARCH_EXYNOS) || (COMPILE_TEST && HAS_IOMEM)
endif
diff --git a/drivers/memory/samsung/exynos-srom.c b/drivers/memory/samsung/exynos-srom.c
index 68e073c..96756fb 100644
--- a/drivers/memory/samsung/exynos-srom.c
+++ b/drivers/memory/samsung/exynos-srom.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -67,11 +68,50 @@ static struct exynos_srom_reg_dump *exynos_srom_alloc_reg_dump(
return rd;
}
+static int exynos_srom_configure_bank(struct exynos_srom *srom,
+ struct device_node *np)
+{
+ u32 bank, width, pmc = 0;
+ u32 timing[6];
+ u32 cs, bw;
+
+ if (of_property_read_u32(np, "reg", &bank))
+ return -EINVAL;
+ if (of_property_read_u32(np, "reg-io-width", &width))
+ width = 1;
+ if (of_property_read_bool(np, "samsung,srom-page-mode"))
+ pmc = 1 << EXYNOS_SROM_BCX__PMC__SHIFT;
+ if (of_property_read_u32_array(np, "samsung,srom-timing", timing,
+ ARRAY_SIZE(timing)))
+ return -EINVAL;
+
+ bank *= 4; /* Convert bank into shift/offset */
+
+ cs = 1 << EXYNOS_SROM_BW__BYTEENABLE__SHIFT;
+ if (width == 2)
+ cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
+
+ bw = __raw_readl(srom->reg_base + EXYNOS_SROM_BW);
+ bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank);
+ __raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW);
+
+ __raw_writel(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
+ (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
+ (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
+ (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
+ (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
+ (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
+ srom->reg_base + EXYNOS_SROM_BC0 + bank);
+
+ return 0;
+}
+
static int exynos_srom_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *child;
struct exynos_srom *srom;
struct device *dev = &pdev->dev;
+ bool bad_bank_config = false;
np = dev->of_node;
if (!np) {
@@ -100,7 +140,23 @@ static int exynos_srom_probe(struct platform_device *pdev)
return -ENOMEM;
}
- return 0;
+ for_each_child_of_node(np, child) {
+ if (exynos_srom_configure_bank(srom, child)) {
+ dev_err(dev,
+ "Could not decode bank configuration for %s\n",
+ child->name);
+ bad_bank_config = true;
+ }
+ }
+
+ /*
+ * If any bank failed to configure, we still provide suspend/resume,
+ * but do not probe child devices
+ */
+ if (bad_bank_config)
+ return 0;
+
+ return of_platform_populate(np, NULL, NULL, dev);
}
static int exynos_srom_remove(struct platform_device *pdev)
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
` (4 preceding siblings ...)
2016-04-11 7:42 ` [RESPIN v2 5/6] memory: samsung: exynos-srom: Add support for bank configuration Pankaj Dubey
@ 2016-04-11 7:42 ` Pankaj Dubey
2016-04-12 14:35 ` Krzysztof Kozlowski
2016-04-18 12:30 ` [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Krzysztof Kozlowski
6 siblings, 1 reply; 9+ messages in thread
From: Pankaj Dubey @ 2016-04-11 7:42 UTC (permalink / raw)
To: linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, k.kozlowski, p.fedin, olof, thomas.ab, Pankaj Dubey
This patch changes SROM nodes compatible from generic to model specific
to match with binding documentation. Also updating property
"samsung,srom-page-mode" as it is not defined as bool instead of int
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
arch/arm/boot/dts/exynos4.dtsi | 4 ++--
arch/arm/boot/dts/exynos5.dtsi | 4 ++--
arch/arm/boot/dts/exynos5410-smdk5410.dts | 2 +-
arch/arm/boot/dts/exynos5410.dtsi | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 000d506..a55a159 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -77,8 +77,8 @@
reg = <0x10000000 0x100>;
};
- sromc@12570000 {
- compatible = "samsung,exynos-srom";
+ memory-controller@12570000 {
+ compatible = "samsung,exynos4210-srom";
reg = <0x12570000 0x14>;
};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 92313ca..d5c0f18 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -31,8 +31,8 @@
reg = <0x10000000 0x100>;
};
- sromc@12250000 {
- compatible = "samsung,exynos-srom";
+ memory-controller@12250000 {
+ compatible = "samsung,exynos4210-srom";
reg = <0x12250000 0x14>;
};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index a731fbe..0f6429e 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -97,7 +97,7 @@
smsc,irq-push-pull;
smsc,force-internal-phy;
- samsung,srom-page-mode = <1>;
+ samsung,srom-page-mode;
samsung,srom-timing = <9 12 1 9 1 1>;
};
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index fa55867..7a56aec 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -102,8 +102,8 @@
reg = <0x10000000 0x100>;
};
- sromc: sromc@12250000 {
- compatible = "samsung,exynos-srom";
+ sromc: memory-controller@12250000 {
+ compatible = "samsung,exynos4210-srom";
reg = <0x12250000 0x14>;
#address-cells = <2>;
#size-cells = <1>;
--
2.4.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific
2016-04-11 7:42 ` [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific Pankaj Dubey
@ 2016-04-12 14:35 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-04-12 14:35 UTC (permalink / raw)
To: Pankaj Dubey, linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, p.fedin, olof, thomas.ab
On 04/11/2016 09:42 AM, Pankaj Dubey wrote:
> This patch changes SROM nodes compatible from generic to model specific
> to match with binding documentation. Also updating property
> "samsung,srom-page-mode" as it is not defined as bool instead of int
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
> arch/arm/boot/dts/exynos4.dtsi | 4 ++--
> arch/arm/boot/dts/exynos5.dtsi | 4 ++--
> arch/arm/boot/dts/exynos5410-smdk5410.dts | 2 +-
> arch/arm/boot/dts/exynos5410.dtsi | 4 ++--
> 4 files changed, 7 insertions(+), 7 deletions(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [RESPIN v2 0/6] Add support for Exynos SROM Controller driver
2016-04-11 7:42 [RESPIN v2 0/6] Add support for Exynos SROM Controller driver Pankaj Dubey
` (5 preceding siblings ...)
2016-04-11 7:42 ` [RESPIN v2 6/6] ARM: dts: change SROM node compatible from generic to model specific Pankaj Dubey
@ 2016-04-18 12:30 ` Krzysztof Kozlowski
6 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2016-04-18 12:30 UTC (permalink / raw)
To: Pankaj Dubey, linux-kernel, linux-samsung-soc, linux-arm-kernel
Cc: kgene.kim, p.fedin, olof, thomas.ab
On 04/11/2016 09:42 AM, Pankaj Dubey wrote:
> This is second attemp for making in this series. This is a collection of patches
> already reviewed and merged in maintainer's tree, but could not make it thorugh main linus tree,
> due to last moment suggestion of proper location of driver should be
> "drivers/memory" instead of "drivers/soc". I have rebased all the patches
> and moved into "drivers/memory/samsung". Second time due to some suggestions in binding document.
>
> As this is just a movement without changing actual driver code,
> I have not removed "Reviewed-By", "Tested-By" or "Acked-By".
>
> To make sure everything is fine, I have again tested it on Exynos5880 based
> Chromebook for normal boot, S2R functionality and its working fine.
>
> This series has been prepared on top of next-soc branch of Krzysztof's tree.
>
> Changes since RESPIN-v1:
> - Addressed review comments in srom binding documentation mainly from Rob Herring.
> - Modified compatibility from "samsung, exynos-srom" to "samsung, exynos4210-srom"
> - Changed type of optional property "samsung,srom-page-mode" from int to bool
> - Adjusted exynos-srom driver code for reflecting change in type of above property.
> - Renamed exynos SROM dt node as "memory-controller" instead of "sromc".
>
>
> Pankaj Dubey (5):
> dt-bindings: EXYNOS: Add exynos-srom device tree binding
> memory: Add support for Exynos SROM driver
> MAINTAINERS: Add maintainers entry for drivers/memory/samsung
> ARM: EXYNOS: Remove SROM related register settings from mach-exynos
> ARM: dts: change SROM node compatible from generic to model specific
>
> Pavel Fedin (1):
> memory: samsung: exynos-srom: Add support for bank configuration
Thanks applied. I plan to send it for v4.7 in second pull-request.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread