From: Kishon Vijay Abraham I <kishon@ti.com>
To: David Lechner <david@lechnology.com>
Cc: <petr@barix.com>, <sergei.shtylyov@cogentembedded.com>,
<David.Laight@ACULAB.COM>, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>, Bin Liu <b-liu@ti.com>,
Lee Jones <lee.jones@linaro.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
"open list:USB SUBSYSTEM" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH v3 09/16] phy: da8xx-usb: new driver for DA8xx SoC USB PHY
Date: Wed, 13 Apr 2016 18:50:22 +0530 [thread overview]
Message-ID: <570E4796.7070005@ti.com> (raw)
In-Reply-To: <1458863503-31121-10-git-send-email-david@lechnology.com>
Hi,
On Friday 25 March 2016 05:21 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8xx
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
>
> v3 changes:
>
> * Uses syscon device for CFGCHIP2 instead of using it directly.
> * Got rid of nop inline funtions
> * Correct suffix on funtions to match ops.*
> * Added header file for extern method.
>
>
> drivers/phy/Kconfig | 10 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-da8xx-usb.c | 249 ++++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy-da8xx-usb.h | 19 +++
> 4 files changed, 279 insertions(+)
> create mode 100644 drivers/phy/phy-da8xx-usb.c
> create mode 100644 include/linux/phy/phy-da8xx-usb.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..c1d315f 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -35,6 +35,16 @@ config ARMADA375_USBCLUSTER_PHY
> depends on OF && HAS_IOMEM
> select GENERIC_PHY
>
> +config PHY_DA8XX_USB
> + tristate "TI DA8xx USB PHY Driver"
> + depends on ARCH_DAVINCI_DA8XX
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the USB PHY on DA8xx SoCs.
> +
> + This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
> +
> config PHY_DM816X_USB
> tristate "TI dm816x USB PHY driver"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..722e01c 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
> obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..687d9a0
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,249 @@
> +/*
> + * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
> + *
> + * Copyright (C) 2016 David Lechner <david@lechnology.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/mfd/da8xx-cfgchip.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/phy/phy-da8xx-usb.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/otg.h>
> +
> +struct da8xx_usbphy {
> + struct phy_provider *phy_provider;
> + struct phy *usb11_phy;
> + struct phy *usb20_phy;
> + struct clk *usb11_clk;
> + struct clk *usb20_clk;
> + struct regmap *regmap;
> +};
> +
> +static int da8xx_usb11_phy_power_on(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP2_REG, CFGCHIP2_USB1SUSPENDM,
> + CFGCHIP2_USB1SUSPENDM);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_power_off(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP2_REG, CFGCHIP2_USB1SUSPENDM, 0);
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_power_on,
> + .power_off = da8xx_usb11_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int da8xx_usb20_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(d_phy->usb20_clk);
> + if (ret)
> + return ret;
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP2_REG, CFGCHIP2_OTGPWRDN, 0);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb20_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP2_REG, CFGCHIP2_OTGPWRDN,
> + CFGCHIP2_OTGPWRDN);
> +
> + clk_disable_unprepare(d_phy->usb20_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb20_phy_ops = {
> + .power_on = da8xx_usb20_phy_init,
> + .power_off = da8xx_usb20_phy_shutdown,
> + .owner = THIS_MODULE,
> +};
> +
> +int da8xx_usb20_phy_set_mode(struct phy *phy, enum musb_mode mode)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + switch (mode) {
> + case MUSB_HOST: /* Force VBUS valid, ID = 0 */
> + val = CFGCHIP2_FORCE_HOST;
> + break;
> + case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
> + val = CFGCHIP2_FORCE_DEVICE;
> + break;
> + case MUSB_OTG: /* Don't override the VBUS/ID comparators */
> + val = CFGCHIP2_NO_OVERRIDE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + regmap_write_bits(d_phy->regmap, CFGCHIP2_REG, CFGCHIP2_OTGMODE_MASK,
> + val);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(da8xx_usb20_phy_set_mode);
Don't prefer export symbols from PHY driver. That'll create unnecessary
dependencies between the controller and the PHY.
To see how to fix it, please see my comment for the previous version of your patch.
Thanks
Kishon
next prev parent reply other threads:[~2016-04-13 13:22 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-24 23:51 [PATCH v3 00/16] da8xx USB clocks David Lechner
2016-03-24 23:51 ` [PATCH v3 01/16] dt: davinci: use proper address after @ David Lechner
2016-03-25 13:29 ` Sergei Shtylyov
2016-03-25 15:13 ` Rob Herring
2016-03-25 16:36 ` Sergei Shtylyov
2016-03-25 15:14 ` Rob Herring
2016-04-11 8:19 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 02/16] mfd: da8xx-cfgchip: New header file for CFGCHIP registers David Lechner
2016-03-25 17:22 ` Sergei Shtylyov
2016-03-28 15:02 ` David Lechner
2016-03-28 16:42 ` Sergei Shtylyov
2016-04-11 8:23 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 03/16] ARM: davinici: da8xx: move usb code to new file David Lechner
2016-04-11 8:55 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 04/16] ARM: davinci: Move clock init after ioremap David Lechner
2016-04-11 9:14 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 05/16] ARM: davinci: add set_parent callback for mux clocks David Lechner
2016-04-11 10:40 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 06/16] ARM: davinci: da850: use clk->set_parent for async3 David Lechner
2016-04-11 10:49 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 07/16] ARM: davinci: da8xx: add usb phy clocks David Lechner
2016-03-24 23:51 ` [PATCH v3 08/16] dt-bindings: Add bindings for phy-da8xx-usb David Lechner
2016-03-25 15:04 ` Rob Herring
2016-03-24 23:51 ` [PATCH v3 09/16] phy: da8xx-usb: new driver for DA8xx SoC USB PHY David Lechner
2016-03-25 1:57 ` [PATCH] " David Lechner
2016-03-26 14:10 ` Sergei Shtylyov
2016-04-13 13:20 ` Kishon Vijay Abraham I [this message]
2016-04-13 20:07 ` [PATCH v3 09/16] " David Lechner
2016-04-14 12:38 ` Kishon Vijay Abraham I
2016-03-24 23:51 ` [PATCH v3 10/16] ARM: davinci: da8xx: Add CFGCHIPn syscon platform declaration David Lechner
2016-03-24 23:51 ` [PATCH v3 11/16] ARM: davinci: da8xx: Add USB PHY " David Lechner
2016-03-24 23:51 ` [PATCH v3 12/16] ARM: dt: da850: Add cfgchip syscon node David Lechner
2016-03-24 23:51 ` [PATCH v3 13/16] ARM: dt: da850: Add usb phy node David Lechner
2016-03-24 23:51 ` [PATCH v3 14/16] usb: ohci-da8xx: Remove code that references mach David Lechner
2016-03-24 23:51 ` [PATCH v3 15/16] usb: musb: da8xx: Use devm in probe David Lechner
2016-03-31 22:21 ` Bin Liu
2016-03-31 22:28 ` David Lechner
2016-04-01 14:56 ` Bin Liu
2016-04-01 10:36 ` Sergei Shtylyov
2016-03-24 23:51 ` [PATCH v3 16/16] usb: musb: da8xx: Remove mach code David Lechner
2016-04-07 16:29 ` [PATCH v3 00/16] da8xx USB clocks David Lechner
2016-04-11 11:28 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570E4796.7070005@ti.com \
--to=kishon@ti.com \
--cc=David.Laight@ACULAB.COM \
--cc=b-liu@ti.com \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=petr@barix.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).