From: Matthias Brugger <mbrugger@suse.com>
To: Vladimir Murzin <vladimir.murzin@arm.com>, sudeep.holla@arm.com
Cc: lorenzo.pieralisi@arm.com, linux@arm.linux.org.uk, arnd@arndb.de,
liviu.dudau@arm.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/5] ARM: dts: introduce MPS2 AN385/AN386
Date: Mon, 25 Apr 2016 11:23:38 +0200 [thread overview]
Message-ID: <571DE21A.5010502@suse.com> (raw)
In-Reply-To: <1461574157-23580-4-git-send-email-vladimir.murzin@arm.com>
On 25/04/16 10:49, Vladimir Murzin wrote:
> Application Notes 385 and 386 shares the same memory map and features
> except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386
> is supplied with Cortex-M4.
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mps2-an385.dts | 92 +++++++++++++++
> arch/arm/boot/dts/mps2.dtsi | 241 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 334 insertions(+)
> create mode 100644 arch/arm/boot/dts/mps2-an385.dts
> create mode 100644 arch/arm/boot/dts/mps2.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 95c1923..1efa5a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -253,6 +253,7 @@ dtb-$(CONFIG_ARCH_MMP) += \
> dtb-$(CONFIG_MACH_MESON8B) += \
> meson8b-mxq.dtb \
> meson8b-odroidc1.dtb
> +dtb-$(CONFIG_ARCH_MPS2) += mps2-an385.dtb
> dtb-$(CONFIG_ARCH_MOXART) += \
> moxart-uc7112lx.dtb
> dtb-$(CONFIG_SOC_IMX1) += \
> diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
> new file mode 100644
> index 0000000..d7cb594
> --- /dev/null
> +++ b/arch/arm/boot/dts/mps2-an385.dts
> @@ -0,0 +1,92 @@
> +/*
> + * Copyright (C) 2015 ARM Limited
> + *
> + * Author: Vladimir Murzin <vladimir.murzin@arm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "mps2.dtsi"
> +
> +/ {
> + model = "ARM MPS2 Application Note 385/386";
> + compatible = "arm,mps2";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + bootargs = "rdinit=/sbin/init earlycon";
The rootfs should be independent from the board.
In my opinion, this type of bootargs should not be part of the DTS.
Regards,
Matthias
next prev parent reply other threads:[~2016-04-25 9:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 8:49 [PATCH 0/5] Support MPS2 platform Vladimir Murzin
2016-04-25 8:49 ` [PATCH 1/5] ARM: vexpress/mps2: introduce " Vladimir Murzin
2016-04-25 8:49 ` [PATCH 2/5] ARM: configs: add MPS2 defconfig Vladimir Murzin
2016-04-25 8:49 ` [PATCH 3/5] ARM: dts: introduce MPS2 AN385/AN386 Vladimir Murzin
2016-04-25 9:23 ` Matthias Brugger [this message]
2016-04-25 10:15 ` Vladimir Murzin
2016-04-25 11:32 ` Arnd Bergmann
2016-04-25 12:03 ` Vladimir Murzin
2016-04-25 13:52 ` Sudeep Holla
2016-04-25 8:49 ` [PATCH 4/5] ARM: dts: introduce MPS2 AN399/AN400 Vladimir Murzin
2016-04-25 9:24 ` Matthias Brugger
2016-04-25 8:49 ` [PATCH 5/5] MAINTAINERS: Update ARM Versatile Express platform entry Vladimir Murzin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=571DE21A.5010502@suse.com \
--to=mbrugger@suse.com \
--cc=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=liviu.dudau@arm.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=sudeep.holla@arm.com \
--cc=vladimir.murzin@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox