Re: [PATCH v6 11/12] usb: core: hub: Notify OTG fsm when A device sets b_hnp_enable

[Roger Quadros <rogerq@ti.com>]

On 18/04/16 10:08, Peter Chen wrote:
> On Tue, Apr 05, 2016 at 05:05:16PM +0300, Roger Quadros wrote:
>> This is the a_set_b_hnp_enable flag in the OTG state machine
>> diagram and must be set when the A-Host has successfully set
>> the b_hnp_enable feature of the OTG-B-Peripheral attached to it.
>>
>> When this bit changes we kick our OTG FSM to make note of the
>> change and act accordingly.
> 
> Since we have still not added fsm.a_set_b_hnp_en in OTG FSM, and this
> patch set is mainly for DRD, would you please move out this patch from
> this set?

Sure.

cheers,
-roger

> 
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  drivers/usb/core/hub.c | 17 +++++++++++++++--
>>  1 file changed, 15 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
>> index 38cc4ba..27e3b4c 100644
>> --- a/drivers/usb/core/hub.c
>> +++ b/drivers/usb/core/hub.c
>> @@ -2273,6 +2273,7 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>>  			&& udev->parent == udev->bus->root_hub) {
>>  		struct usb_otg_descriptor	*desc = NULL;
>>  		struct usb_bus			*bus = udev->bus;
>> +		struct usb_hcd			*hcd = bus_to_hcd(bus);
>>  		unsigned			port1 = udev->portnum;
>>  
>>  		/* descriptor may appear anywhere in config */
>> @@ -2302,6 +2303,9 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>>  				dev_err(&udev->dev, "can't set HNP mode: %d\n",
>>  									err);
>>  				bus->b_hnp_enable = 0;
>> +			} else {
>> +				/* notify OTG fsm about a_set_b_hnp_enable */
>> +				usb_otg_kick_fsm(hcd->otg_dev);
>>  			}
>>  		} else if (desc->bLength == sizeof
>>  				(struct usb_otg_descriptor)) {
>> @@ -2312,10 +2316,14 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
>>  				USB_DEVICE_A_ALT_HNP_SUPPORT,
>>  				0, NULL, 0,
>>  				USB_CTRL_SET_TIMEOUT);
>> -			if (err < 0)
>> +			if (err < 0) {
>>  				dev_err(&udev->dev,
>>  					"set a_alt_hnp_support failed: %d\n",
>>  					err);
>> +			} else {
>> +				/* notify OTG fsm about a_set_b_hnp_enable */
>> +				usb_otg_kick_fsm(hcd->otg_dev);
>> +			}
>>  		}
>>  	}
>>  #endif
>> @@ -4355,8 +4363,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
>>  	 */
>>  	if (!hdev->parent) {
>>  		delay = HUB_ROOT_RESET_TIME;
>> -		if (port1 == hdev->bus->otg_port)
>> +		if (port1 == hdev->bus->otg_port) {
>>  			hdev->bus->b_hnp_enable = 0;
>> +#ifdef CONFIG_USB_OTG
>> +			/* notify OTG fsm about a_set_b_hnp_enable change */
>> +			usb_otg_kick_fsm(hcd->otg_dev);
>> +#endif
>> +		}
>>  	}
>>  
>>  	/* Some low speed devices have problems with the quick delay, so */
>> -- 
>> 2.5.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>