From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754012AbcESIFi (ORCPT <rfc822;w@1wt.eu>);
	Thu, 19 May 2016 04:05:38 -0400
Received: from hqemgate16.nvidia.com ([216.228.121.65]:16508 "EHLO
	hqemgate16.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751513AbcESIFH (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Thu, 19 May 2016 04:05:07 -0400
X-PGP-Universal: processed;
	by hqnvupgp07.nvidia.com on Thu, 19 May 2016 01:03:00 -0700
Message-ID: <573D70E8.3070802@nvidia.com>
Date: Thu, 19 May 2016 13:23:12 +0530
From: Laxman Dewangan <ldewangan@nvidia.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
MIME-Version: 1.0
To: <thierry.reding@gmail.com>, <airlied@linux.ie>, <swarren@wwwdotorg.org>,
        <jonathanh@nvidia.com>
CC: <gnurou@gmail.com>, <dri-devel@lists.freedesktop.org>,
        <linux-kernel@vger.kernel.org>, <linux-tegra@vger.kernel.org>
Subject: Re: [PATCH V5 0/3] soc/tegra: Add support for IO pads power and voltage
 control
References: <1463055706-17744-1-git-send-email-ldewangan@nvidia.com>
In-Reply-To: <1463055706-17744-1-git-send-email-ldewangan@nvidia.com>
X-Originating-IP: [10.19.65.30]
X-ClientProxiedBy: BGMAIL101.nvidia.com (10.25.59.10) To bgmail102.nvidia.com
 (10.25.59.11)
Content-Type: text/plain; charset="ISO-8859-1"; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Hi Jon/Thierry,

On Thursday 12 May 2016 05:51 PM, Laxman Dewangan wrote:
> The IO pins of Tegra SoCs are grouped for common control of IO interface
> like setting voltage signal levels and power state of the interface. The
> group is generally referred as IO pads. The power state and voltage control
> of IO pins can be done at IO pads level.
>
> Tegra124 onwards IO pads support the power down state when system is
> active. The voltage levels on IO pads are auto detected on Tegra124/
> Tegra132 but it is not in Tegra210. For Tegra210, the SW need to
> explicitly configure the voltage levels of IO pads
>
> This series add the interface for the IO pad power state and voltage
> configurations. Modifies the client to use new APIs.
> Register the child devices to provide the client interface to configure
> IO pads power state and voltage from Device tree.
>

Any comment on this series?