From: Neil Armstrong <narmstrong@baylibre.com>
To: Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [RFC PATCH] usb: gadget: Introduce Cadence USB2 UDC Driver
Date: Tue, 24 May 2016 16:16:16 +0200 [thread overview]
Message-ID: <57446230.6000208@baylibre.com> (raw)
In-Reply-To: <87ziydncuj.fsf@saruman.tx.rr.com>
[-- Attachment #1.1: Type: text/plain, Size: 3050 bytes --]
Hi Felipe, Laurent,
I submitted this driver for a Cadence IP library from a now abandoned project.
The driver was working on a SoC platform ported on a FPGA, but I do not have access to this HW anymore.
But I have a fixed version...
Now, I am looking for SoCs, vendors and even Cadence people (or even Evatronix employees who worked on this IP before being in Cadence portfolio)
to push this driver upstream by testing it on a real HW or even FPGA.
I hope this message in a bottle will get read !
Regards,
Neil
On 11/16/2015 05:11 PM, Felipe Balbi wrote:
>
> Hi,
>
> Neil Armstrong <narmstrong@baylibre.com> writes:
>> Introduces UDC support for the Device-Mode only version of the
>> Cadence USB2 Controller IP Core.
>>
>> Host mode and OTG mode are not implemented by lack of hardware.
>> Support for Isochronous endpoints is not implemented by lack of time.
>>
>> Internal DMA is supported and can be activated by DT property.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> looks like there are a few checkpatch warnings to be fixed:
>
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #89:
> new file mode 100644
>
> WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
> #233: FILE: drivers/usb/gadget/udc/cadence_hsudc.c:44:
> + * - EP Bulk and Interrupt tranfer
>
> WARNING: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
> #968: FILE: drivers/usb/gadget/udc/cadence_hsudc.c:779:
> + BUG();
>
> WARNING: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
> #1492: FILE: drivers/usb/gadget/udc/cadence_hsudc.c:1303:
> + BUG();
>
> WARNING: DT compatible string "cdns,usbhs-udc" appears un-documented -- check workspace/linux/Documentation/devicetree/bindings/
> #1882: FILE: drivers/usb/gadget/udc/cadence_hsudc.c:1693:
> + { .compatible = "cdns,usbhs-udc" },
>
> WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
> #2603: FILE: drivers/usb/gadget/udc/cadence_hsudc_regs.h:272:
> +#define HSUDC_DMA_BUSCTRL_HSIZE_8BIT (0 << 1) /* 8-bit data tranfer */
>
> WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
> #2604: FILE: drivers/usb/gadget/udc/cadence_hsudc_regs.h:273:
> +#define HSUDC_DMA_BUSCTRL_HSIZE_16BIT (1 << 1) /* 16-bit data tranfer */
>
> WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
> #2605: FILE: drivers/usb/gadget/udc/cadence_hsudc_regs.h:274:
> +#define HSUDC_DMA_BUSCTRL_HSIZE_32BIT (2 << 1) /* 32-bit data tranfer */
>
> WARNING: 'tranfer' may be misspelled - perhaps 'transfer'?
> #2607: FILE: drivers/usb/gadget/udc/cadence_hsudc_regs.h:276:
> +#define HSUDC_DMA_BUSCTRL_BURST_SINGLE (0 << 4) /* Single tranfer */
>
> total: 0 errors, 9 warnings, 2499 lines checked
>
> Your patch has style problems, please review.
>
> NOTE: If any of the errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2016-05-24 14:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 16:33 [RFC PATCH] usb: gadget: Introduce Cadence USB2 UDC Driver kbuild test robot
2015-10-16 14:54 ` Neil Armstrong
2015-10-16 16:33 ` [PATCH] usb: gadget: fix bugon.cocci warnings kbuild test robot
2015-10-16 16:33 ` [PATCH] usb: gadget: fix platform_no_drv_owner.cocci warnings kbuild test robot
2015-10-16 16:46 ` [RFC PATCH] usb: gadget: Introduce Cadence USB2 UDC Driver kbuild test robot
2015-11-16 16:11 ` Felipe Balbi
2016-05-24 14:16 ` Neil Armstrong [this message]
2016-05-24 14:34 ` Felipe Balbi
2016-05-24 15:35 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57446230.6000208@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox