* [PATCH v2 2/2] extcon: gpio: add DT binding doc for extcon-gpio
2016-05-25 11:35 ` [PATCH v2 1/2] extcon: gpio: add device tree support for extcon-gpio Venkat Reddy Talla
@ 2016-05-25 11:35 ` Venkat Reddy Talla
2016-05-25 12:32 ` [PATCH v2 1/2] extcon: gpio: add device tree support " Chanwoo Choi
1 sibling, 0 replies; 3+ messages in thread
From: Venkat Reddy Talla @ 2016-05-25 11:35 UTC (permalink / raw)
To: MyungJoo Ham, Chanwoo Choi, Rob Herring, Pawel Moll
Cc: Mark Rutland, Ian Campbell, devicetree, Kumar Gala, linux-kernel,
Laxman Dewangan, Venkat Reddy Talla
Adding DT binding doc for extcon gpio device
properties.
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
---
changes in v2:
- added description for extcon-gpio
- using gpio flag cell to handle gpio active state
- change dts property name gpio to gpios
- removed prefix for debounce
- added description for extcon-gpio,cable-names
---
---
.../devicetree/bindings/extcon/extcon-gpio.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
new file mode 100644
index 0000000..2302960
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -0,0 +1,22 @@
+EXTCON FOR GPIO
+
+extcon-gpio responsible to detect external cable state when
+attached or detached.
+
+Required Properties:
+ - compatible : Should be "extcon-gpio";
+
+Optional Properties:
+ - extcon-gpio,name: Name of extcon device.
+ - gpios: gpio number.
+ - extcon-gpio,irq-flags: IRQ flags for gpio.
+ - debounce-ms: Debounce time in ms.
+ - extcon-gpio,cable-names: The unique id of specific external connector
+ defined in include/linux/extcon.h
+
+extcon-gpio {
+ compatible = "extcon-gpio";
+ extcon-gpio,name = "VBUS";
+ gpios = <&gpio 20 0>;
+ extcon-gpio,cable-names = <EXTCON_USB EXTCON_NONE>;
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2 1/2] extcon: gpio: add device tree support for extcon-gpio
2016-05-25 11:35 ` [PATCH v2 1/2] extcon: gpio: add device tree support for extcon-gpio Venkat Reddy Talla
2016-05-25 11:35 ` [PATCH v2 2/2] extcon: gpio: add DT binding doc " Venkat Reddy Talla
@ 2016-05-25 12:32 ` Chanwoo Choi
1 sibling, 0 replies; 3+ messages in thread
From: Chanwoo Choi @ 2016-05-25 12:32 UTC (permalink / raw)
To: Venkat Reddy Talla, MyungJoo Ham, Rob Herring, Pawel Moll
Cc: Mark Rutland, Ian Campbell, devicetree, Kumar Gala, linux-kernel,
Laxman Dewangan
Hi Venkat,
I'm already working the support the device-tree for extcon-gpio [1].
[1] https://lkml.org/lkml/2015/10/21/8
- [PATCH v3] extcon: gpio: Add the support for Device tree bindings
So, I just apply this patch the temporay extcon-test[2] branch on extcon.git.
[2] https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/commit/?h=extcon-test&id=294d13e8d79fb0997e1bb146892cd75ec02221c0
But, Rob Herring gave me the some comment[2].
[3] https://lkml.org/lkml/2015/10/21/906
[4] https://lkml.org/lkml/2015/10/26/80
So, if you possible, do you improve the extcon-gpio.c for device-tree using by my patch[1]?
I think that you could improve the extcon-gpio.c driver as comment of Rob Herring.
I'm sorry for late reply.
Thanks,
Chanwoo Choi
On 2016년 05월 25일 20:35, Venkat Reddy Talla wrote:
> Adding device tree support for extcon-gpio driver.
>
> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
>
> ---
> changes in v2:
> - using gpio flag cell to handle gpio active state
> - change dts property name gpio to gpios
> - removed prefix for debounce
> ---
> ---
> drivers/extcon/extcon-gpio.c | 80 +++++++++++++++++++++++++++++++++++---
> include/linux/extcon/extcon-gpio.h | 4 +-
> 2 files changed, 77 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index d023789..f29032c 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -28,6 +28,8 @@
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
>
> struct gpio_extcon_data {
> struct extcon_dev *edev;
> @@ -90,21 +92,80 @@ static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
> return 0;
> }
>
> +static struct gpio_extcon_pdata *gpio_extcon_of_pdata(
> + struct platform_device *pdev)
> +{
> + struct gpio_extcon_pdata *pdata;
> + struct device_node *np = pdev->dev.of_node;
> + enum of_gpio_flags flags;
> + int gpio;
> + u32 pval;
> + int ret;
> +
> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + gpio = of_get_named_gpio_flags(np, "gpios", 0, &flags);
> + if (gpio < 0)
> + return ERR_PTR(gpio);
> +
> + pdata->gpio = gpio;
> +
> + if (flags & OF_GPIO_ACTIVE_LOW)
> + pdata->gpio_active_low = 1;
> +
> + ret = of_property_read_u32(np, "extcon-gpio,irq-flags", &pval);
> + if (!ret)
> + pdata->irq_flags = pval;
> + else
> + pdata->irq_flags = IRQF_TRIGGER_RISING |
> + IRQF_TRIGGER_FALLING;
> +
> + ret = of_property_read_u32(np, "debounce-ms", &pval);
> + if (!ret)
> + pdata->debounce = pval;
> +
> + pdata->extcon_cable_cnt = of_property_count_u32_elems(np,
> + "extcon-gpio,cable-names");
> + if (pdata->extcon_cable_cnt <= 0) {
> + dev_err(&pdev->dev, "not found out cable names\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + pdata->extcon_id = devm_kzalloc(&pdev->dev,
> + (pdata->extcon_cable_cnt) *
> + sizeof(*pdata->extcon_id), GFP_KERNEL);
> + if (!pdata->extcon_id)
> + return ERR_PTR(-ENOMEM);
> +
> + ret = of_property_read_u32_array(np, "extcon-gpio,cable-names",
> + pdata->extcon_id, pdata->extcon_cable_cnt);
> + if (ret)
> + return ERR_PTR(-EINVAL);
> +
> + return pdata;
> +}
> +
> static int gpio_extcon_probe(struct platform_device *pdev)
> {
> struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev);
> struct gpio_extcon_data *data;
> int ret;
>
> - if (!pdata)
> - return -EBUSY;
> - if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
> - return -EINVAL;
> -
> data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
> GFP_KERNEL);
> if (!data)
> return -ENOMEM;
> +
> + if (!pdata && pdev->dev.of_node)
> + pdata = gpio_extcon_of_pdata(pdev);
> +
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + if (!pdata->irq_flags || !pdata->extcon_id)
> + return -EINVAL;
> +
> data->pdata = pdata;
>
> /* Initialize the gpio */
> @@ -113,7 +174,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> return ret;
>
> /* Allocate the memory of extcon devie and register extcon device */
> - data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
> + data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->extcon_id);
> if (IS_ERR(data->edev)) {
> dev_err(&pdev->dev, "failed to allocate extcon device\n");
> return -ENOMEM;
> @@ -167,12 +228,19 @@ static int gpio_extcon_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
>
> +static const struct of_device_id of_extcon_gpio_tbl[] = {
> + { .compatible = "extcon-gpio", },
> + { /* end */ }
> +};
> +MODULE_DEVICE_TABLE(of, of_extcon_gpio_tbl);
> +
> static struct platform_driver gpio_extcon_driver = {
> .probe = gpio_extcon_probe,
> .remove = gpio_extcon_remove,
> .driver = {
> .name = "extcon-gpio",
> .pm = &gpio_extcon_pm_ops,
> + .of_match_table = of_extcon_gpio_tbl,
> },
> };
>
> diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
> index 7cacafb..1914894 100644
> --- a/include/linux/extcon/extcon-gpio.h
> +++ b/include/linux/extcon/extcon-gpio.h
> @@ -31,15 +31,17 @@
> * If false, high state of gpio means active.
> * @debounce: Debounce time for GPIO IRQ in ms.
> * @irq_flags: IRQ Flags (e.g., IRQF_TRIGGER_LOW).
> + * extcon_cable_cnt: External cable count.
> * @check_on_resume: Boolean describing whether to check the state of gpio
> * while resuming from sleep.
> */
> struct gpio_extcon_pdata {
> - unsigned int extcon_id;
> + unsigned int *extcon_id;
> unsigned gpio;
> bool gpio_active_low;
> unsigned long debounce;
> unsigned long irq_flags;
> + int extcon_cable_cnt;
>
> bool check_on_resume;
> };
>
^ permalink raw reply [flat|nested] 3+ messages in thread