Re: [PATCH v2] mfd: stmpe: move platform data into mfd driver

[Patrice Chotard <patrice.chotard@st.com>]

On 05/25/2016 02:22 PM, Linus Walleij wrote:
> The STMPE platform data is only populated from the device tree
> in all existing users, so push the struct and make the OF case
> the norm.
>
> Cc: Patrice Chotard <patrice.chotard@st.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Drop check for (!np) NULL device node: as Lee notices, this
>    can no longer happen on a pure DT driver.
> ---
>   drivers/mfd/stmpe.c       | 40 ++++++++++++++++++++++++++++------------
>   include/linux/mfd/stmpe.h | 22 +---------------------
>   2 files changed, 29 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index fb8f9e8b75df..94c7cc02fdab 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -23,6 +23,27 @@
>   #include <linux/regulator/consumer.h>
>   #include "stmpe.h"
>   
> +/**
> + * struct stmpe_platform_data - STMPE platform data
> + * @id: device id to distinguish between multiple STMPEs on the same board
> + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
> + * @irq_trigger: IRQ trigger to use for the interrupt to the host
> + * @autosleep: bool to enable/disable stmpe autosleep
> + * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
> + * @irq_over_gpio: true if gpio is used to get irq
> + * @irq_gpio: gpio number over which irq will be requested (significant only if
> + *	      irq_over_gpio is true)
> + */
> +struct stmpe_platform_data {
> +	int id;
> +	unsigned int blocks;
> +	unsigned int irq_trigger;
> +	bool autosleep;
> +	bool irq_over_gpio;
> +	int irq_gpio;
> +	int autosleep_timeout;
> +};
> +
>   static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
>   {
>   	return stmpe->variant->enable(stmpe, blocks, true);
> @@ -1187,24 +1208,19 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata,
>   /* Called from client specific probe routines */
>   int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
>   {
> -	struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
> +	struct stmpe_platform_data *pdata;
>   	struct device_node *np = ci->dev->of_node;
>   	struct stmpe *stmpe;
>   	int ret;
>   
> -	if (!pdata) {
> -		if (!np)
> -			return -EINVAL;
> -
> -		pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
> -		if (!pdata)
> -			return -ENOMEM;
> +	pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return -ENOMEM;
>   
> -		stmpe_of_probe(pdata, np);
> +	stmpe_of_probe(pdata, np);
>   
> -		if (of_find_property(np, "interrupts", NULL) == NULL)
> -			ci->irq = -1;
> -	}
> +	if (of_find_property(np, "interrupts", NULL) == NULL)
> +		ci->irq = -1;
>   
>   	stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
>   	if (!stmpe)
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> index cb83883918a7..de748bc7525e 100644
> --- a/include/linux/mfd/stmpe.h
> +++ b/include/linux/mfd/stmpe.h
> @@ -62,6 +62,7 @@ enum {
>   
>   struct stmpe_variant_info;
>   struct stmpe_client_info;
> +struct stmpe_platform_data;
>   
>   /**
>    * struct stmpe - STMPE MFD structure
> @@ -117,25 +118,4 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
>   
>   #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
>   
> -/**
> - * struct stmpe_platform_data - STMPE platform data
> - * @id: device id to distinguish between multiple STMPEs on the same board
> - * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
> - * @irq_trigger: IRQ trigger to use for the interrupt to the host
> - * @autosleep: bool to enable/disable stmpe autosleep
> - * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
> - * @irq_over_gpio: true if gpio is used to get irq
> - * @irq_gpio: gpio number over which irq will be requested (significant only if
> - *	      irq_over_gpio is true)
> - */
> -struct stmpe_platform_data {
> -	int id;
> -	unsigned int blocks;
> -	unsigned int irq_trigger;
> -	bool autosleep;
> -	bool irq_over_gpio;
> -	int irq_gpio;
> -	int autosleep_timeout;
> -};
> -
>   #endif

Acked-by: Patrice Chotard <patrice.chotard@st.com>

Thanks

Patrice