From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Roger Quadros <rogerq@ti.com>, <balbi@kernel.org>
Cc: <tony@atomide.com>, <Joao.Pinto@synopsys.com>,
<sergei.shtylyov@cogentembedded.com>, <peter.chen@freescale.com>,
<jun.li@freescale.com>, <yoshihiro.shimoda.uh@renesas.com>,
<nsekhar@ti.com>, <b-liu@ti.com>, <linux-usb@vger.kernel.org>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v9 5/5] usb: dwc3: core: cleanup IRQ resources
Date: Thu, 2 Jun 2016 14:52:45 +0300 [thread overview]
Message-ID: <57501E0D.4010007@ti.com> (raw)
In-Reply-To: <574E92E8.5080201@ti.com>
On 06/01/2016 10:46 AM, Roger Quadros wrote:
> Implementations might use different IRQs for
> host, gadget and OTG so use named interrupt resources
> to allow Device tree to specify the 3 interrupts.
>
> Following are the interrupt names
>
> Peripheral Interrupt - peripheral
> HOST Interrupt - host
> OTG Interrupt - otg
or "dwc_usb3"??
>
> We still maintain backward compatibility for a single named
> interrupt for all 3 interrupts (e.g. for dwc3-pci) and
> single unnamed interrupt for all 3 interrupts (e.g. old DT).
bindings
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> v9: rebased on top of balbi/testing/next
>
> drivers/usb/dwc3/core.c | 10 ----------
> drivers/usb/dwc3/gadget.c | 20 ++++++++++++++++++--
> drivers/usb/dwc3/host.c | 19 +++++++++++++++++++
> 3 files changed, 37 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9c4e1d8d..5cedf3d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -843,16 +843,6 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->mem = mem;
> dwc->dev = dev;
>
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (!res) {
> - dev_err(dev, "missing IRQ\n");
> - return -ENODEV;
> - }
> - dwc->xhci_resources[1].start = res->start;
> - dwc->xhci_resources[1].end = res->end;
> - dwc->xhci_resources[1].flags = res->flags;
> - dwc->xhci_resources[1].name = res->name;
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index c37168d..c18c72f 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1726,7 +1726,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> int ret = 0;
> int irq;
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> + irq = dwc->irq_gadget;
> ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
> IRQF_SHARED, "dwc3", dwc->ev_buf);
> if (ret) {
> @@ -1734,7 +1734,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> irq, ret);
> goto err0;
> }
> - dwc->irq_gadget = irq;
>
> spin_lock_irqsave(&dwc->lock, flags);
> if (dwc->gadget_driver) {
> @@ -2853,6 +2852,23 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
> int dwc3_gadget_init(struct dwc3 *dwc)
> {
> int ret;
> + struct resource *res;
> + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
> +
> + dwc->irq_gadget = platform_get_irq_byname(dwc3_pdev, "peripheral");
> + if (dwc->irq_gadget <= 0) {
Is it expected to get -EPROBE_DEFER here?
> + dwc->irq_gadget = platform_get_irq_byname(dwc3_pdev,
> + "dwc_usb3");
> + if (dwc->irq_gadget <= 0) {
> + res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
> + 0);
It's better to use platform_get_irq().
> + if (!res) {
> + dev_err(dwc->dev, "missing peripheral IRQ\n");
> + return -ENODEV;
> + }
> + dwc->irq_gadget = res->start;
> + }
> + }
>
> dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
> &dwc->ctrl_req_addr, GFP_KERNEL);
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index c679f63..f2b60a4 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -25,6 +25,25 @@ int dwc3_host_init(struct dwc3 *dwc)
> struct platform_device *xhci;
> struct usb_xhci_pdata pdata;
> int ret;
> + struct resource *res;
> + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
> +
> + res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ, "host");
> + if (!res) {
> + res = platform_get_resource_byname(dwc3_pdev, IORESOURCE_IRQ,
> + "dwc_usb3");
> + if (!res) {
> + res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
> + 0);
> + if (!res)
> + return -ENOMEM;
> + }
> + }
Is it expected to have more than one IRQ here?
if not - it will better to use platform_get_irq[_byname]().
> +
> + dwc->xhci_resources[1].start = res->start;
> + dwc->xhci_resources[1].end = res->end;
> + dwc->xhci_resources[1].flags = res->flags;
> + dwc->xhci_resources[1].name = res->name;
>
> xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
> if (!xhci) {
>
--
regards,
-grygorii
next prev parent reply other threads:[~2016-06-02 11:53 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 14:36 [PATCH v8 0/5] dwc3: omap: fixes and dual-role preparation Roger Quadros
2016-05-11 14:36 ` [PATCH v8 1/5] usb: dwc3: omap: use request_threaded_irq() Roger Quadros
2016-05-11 14:36 ` [PATCH v8 2/5] usb: dwc3: omap: Mark the interrupt handler as shared Roger Quadros
2016-05-11 14:36 ` [PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT Roger Quadros
2016-05-11 14:36 ` [PATCH v8 4/5] usb: dwc3: omap: Pass VBUS and ID events transparently Roger Quadros
2016-05-11 14:36 ` [PATCH v8 5/5] usb: dwc3: core: cleanup IRQ resources Roger Quadros
2016-05-24 9:35 ` Felipe Balbi
2016-05-24 12:35 ` Roger Quadros
2016-06-01 7:46 ` [PATCH v9 " Roger Quadros
2016-06-01 8:06 ` Felipe Balbi
2016-06-07 9:28 ` Roger Quadros
2016-06-02 11:52 ` Grygorii Strashko [this message]
2016-06-07 9:34 ` Roger Quadros
2016-06-07 11:49 ` Grygorii Strashko
2016-06-07 12:44 ` Roger Quadros
2016-06-07 13:09 ` Felipe Balbi
2016-06-07 14:05 ` Roger Quadros
2016-06-10 7:56 ` Roger Quadros
2016-06-10 8:02 ` Roger Quadros
2016-06-10 8:04 ` Roger Quadros
2016-06-10 8:18 ` Felipe Balbi
2016-06-10 8:32 ` Roger Quadros
2016-06-10 9:18 ` Felipe Balbi
2016-06-10 8:11 ` Felipe Balbi
2016-06-10 9:56 ` [PATCH v10 " Roger Quadros
2016-06-10 10:39 ` Sergei Shtylyov
2016-06-10 11:35 ` Roger Quadros
2016-06-10 11:44 ` Sergei Shtylyov
2016-06-10 11:46 ` Roger Quadros
2016-06-10 12:22 ` Sergei Shtylyov
2016-06-10 11:48 ` [PATCH v11 " Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57501E0D.4010007@ti.com \
--to=grygorii.strashko@ti.com \
--cc=Joao.Pinto@synopsys.com \
--cc=b-liu@ti.com \
--cc=balbi@kernel.org \
--cc=jun.li@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=peter.chen@freescale.com \
--cc=rogerq@ti.com \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=tony@atomide.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox