Re: [PATCH] watchdog: f71808e_wdt: Add F81866 support

[Guenter Roeck <linux@roeck-us.net>]

On 06/07/2016 06:40 PM, Ji-Ze Hong (Peter Hong) wrote:
> Hi Guenter,
>
> Guenter Roeck 於 2016/6/7 下午 10:06 寫道:
>> On 06/05/2016 11:58 PM, Ji-Ze Hong (Peter Hong) wrote:
>>> +#define SIO_REG_PORT_SEL    0x27    /* F81866 Multi-Function Register */
>>> +#define SIO_REG_GPIO1        0x2c    /*
>>> +                     * GPIO1 Control Register when 27h
>>> +                     * BIT3:2 = 01 & BIT0 = 0
>>> +                     *
>>> +                     * The PIN 70(GPIO15/WDTRST) is
>>> +                     * controlled by 2Ch:
>>> +                     * BIT5: 0 -> WDTRST#
>>> +                     *       1 -> GPIO15
>>> +                     */
>>> +
>> Please keep register defines in order, and move the explanation
>> to where the register values are set.
>
> OK. BTW, should I rename SIO_REG_PORT_SEL & SIO_REG_GPIO1 to
> SIO_F81866_REG_PORT_SEL & SIO_F81866_REG_GPIO1? It's only used by
> F81866.
>

Might be a good idea.

Thanks,
Guenter

>>> +    case f81866:
>>> +        /* Set pin 70 to WDTRST# */
>>> +        superio_clear_bit(watchdog.sioaddr, SIO_REG_PORT_SEL, 9);
>>> +        superio_set_bit(watchdog.sioaddr, SIO_REG_PORT_SEL, 4);
>>> +        superio_clear_bit(watchdog.sioaddr, SIO_REG_GPIO1, 0x20);
>>
>> Using BIT() here would be a bit nicer. Yes, I know, it isn't done
>> everywhere
>> in this driver, but that doesn't mean we should not do it in added code.
>
> I'll use BIT() to re-write it.
>
> Thanks