public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Lin Feng <linf@chinanetcenter.com>
To: Andreas Dilger <adilger@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>,
	linux-ext4 <linux-ext4@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ext4: mballoc.c: fix ac_g_ex and ac_f_ex misuse bug in EXT4_MB_HINT_TRY_GOAL path
Date: Wed, 08 Jun 2016 14:08:21 +0800	[thread overview]
Message-ID: <5757B655.6080803@chinanetcenter.com> (raw)
In-Reply-To: <D4F0CA1E-2075-4EBE-A945-A56F6B7D6808@dilger.ca>

Hi Andreas,

Thanks for your reply and review.

On 06/08/2016 05:01 AM, Andreas Dilger wrote:
> On Jun 2, 2016, at 6:01 AM, Lin Feng <linf@chinanetcenter.com> wrote:
>>
>> Descriptions:
>> ext4 block allocation core stack:
>> ext4_mb_new_blocks
>>   ext4_mb_normalize_request
>>   ext4_mb_regular_allocator
>>     ext4_mb_find_by_goal
>>       mb_find_extent(e4b, ac->ac_g_ex.fe_start, ac->ac_g_ex.fe_len, &ex);
>>
>> The start block searching hint for merging(use EXT4_MB_HINT_TRY_GOAL flag)
>> set in ext4_mb_normalize_request is stored in ac_f_ex, while in
>> EXT4_MB_HINT_TRY_GOAL path which falls in ext4_mb_find_by_goal always use
>> ac_g_ex as a hint and the hint set in ext4_mb_normalize_request is never
>> use.
>>
>> We could hit this bug by writing a sparse file from backward mode and the
>> file may get fragments even if the physical blocks in the hole is free,
>> which is expected to be merged into a single extent.
>
> This looks reasonable.  Do you have any kind of test case that shows the
> effect of the change (e.g. fragmentation counts per file before/after)?

I found this bug by fiddling the block allocation policy for ext4.

In order to see the effect of this patch, we could do the following:

On a fresh created ext4 fs, make a new topdir called b to hash the test to some 
blockgroup relatively empty, trying to not to be effected by original physical 
fragments. Then write a new file in backward mode.

steps:
1. mkdir b && cd b

2. before this patch:
[root@CentOS6 b]# rm dat -f && sync && sleep 2 && dd if=/dev/zero of=dat bs=4k 
count=256 seek=511 conv=notrunc && sync && sleep 2 && dd if=/dev/zero of=dat 
bs=4k count=254 seek=257 conv=notrunc && sync && filefrag -vv dat
256+0 records in
256+0 records out
1048576 bytes (1.0 MB) copied, 0.000825721 s, 1.3 GB/s
254+0 records in
254+0 records out
1040384 bytes (1.0 MB) copied, 0.000766912 s, 1.4 GB/s
Filesystem type is: ef53
File size of dat is 3141632 (767 blocks, blocksize 4096)
  ext logical physical expected length flags
    0     257     9512             254
    1     511   557056     9766    256 eof
dat: 2 extents found

3. after this patch:
[root@CentOS6 b]# rm dat -f && sync && sleep 2 && dd if=/dev/zero of=dat bs=4k 
count=256 seek=511 conv=notrunc && sync && sleep 2 && dd if=/dev/zero of=dat 
bs=4k count=254 seek=257 conv=notrunc && sync && filefrag -vv dat
256+0 records in
256+0 records out
1048576 bytes (1.0 MB) copied, 0.000856416 s, 1.2 GB/s
254+0 records in
254+0 records out
1040384 bytes (1.0 MB) copied, 0.000669862 s, 1.6 GB/s
Filesystem type is: ef53
File size of dat is 3141632 (767 blocks, blocksize 4096)
  ext logical physical expected length flags
    0     257   556802             510 eof
dat: 1 extent found

thanks,
linfeng
>
> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
>
>> Signed-off-by: Lin Feng <linf@chinanetcenter.com>
>> ---
>> fs/ext4/mballoc.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
>> index c1ab3ec..e31fc63 100644
>> --- a/fs/ext4/mballoc.c
>> +++ b/fs/ext4/mballoc.c
>> @@ -3198,15 +3198,15 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
>> 	if (ar->pright && (ar->lright == (start + size))) {
>> 		/* merge to the right */
>> 		ext4_get_group_no_and_offset(ac->ac_sb, ar->pright - size,
>> -						&ac->ac_f_ex.fe_group,
>> -						&ac->ac_f_ex.fe_start);
>> +						&ac->ac_g_ex.fe_group,
>> +						&ac->ac_g_ex.fe_start);
>> 		ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL;
>> 	}
>> 	if (ar->pleft && (ar->lleft + 1 == start)) {
>> 		/* merge to the left */
>> 		ext4_get_group_no_and_offset(ac->ac_sb, ar->pleft + 1,
>> -						&ac->ac_f_ex.fe_group,
>> -						&ac->ac_f_ex.fe_start);
>> +						&ac->ac_g_ex.fe_group,
>> +						&ac->ac_g_ex.fe_start);
>> 		ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL;
>> 	}
>>
>> --
>> 1.9.3
>>
>>
>
>
> Cheers, Andreas
>
>
>
>
>

  reply	other threads:[~2016-06-08  6:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-02 12:01 [PATCH] ext4: mballoc.c: fix ac_g_ex and ac_f_ex misuse bug in EXT4_MB_HINT_TRY_GOAL path Lin Feng
2016-06-06  2:23 ` Lin Feng
2016-06-07 21:01 ` Andreas Dilger
2016-06-08  6:08   ` Lin Feng [this message]
2016-06-08  6:15     ` Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5757B655.6080803@chinanetcenter.com \
    --to=linf@chinanetcenter.com \
    --cc=adilger@dilger.ca \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox