Re: [PATCH v4 3/7] powerpc: use the new LED disk activity trigger

[Jacek Anaszewski <j.anaszewski@samsung.com>]

Hi all,

For consistency reasons this patch should be merged through LED tree,
but I need an ack from relevant maintainer. Benjamin, Michael, Paul?

Thanks,
Jacek Anaszewski

On 06/10/2016 07:59 AM, Stephan Linz wrote:
> - dts: rename 'ide-disk' to 'disk-activity'
> - defconfig: rename 'ADB_PMU_LED_IDE' to 'ADB_PMU_LED_DISK'
>
> Cc: Joseph Jezak <josejx@gentoo.org>
> Cc: Jörg Sommer <joerg@alea.gnuu.de>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---
>   arch/powerpc/boot/dts/mpc8315erdb.dts |  2 +-
>   arch/powerpc/boot/dts/mpc8377_rdb.dts |  2 +-
>   arch/powerpc/boot/dts/mpc8378_rdb.dts |  2 +-
>   arch/powerpc/boot/dts/mpc8379_rdb.dts |  2 +-
>   arch/powerpc/configs/pmac32_defconfig |  2 +-
>   arch/powerpc/configs/ppc6xx_defconfig |  2 +-
>   drivers/macintosh/Kconfig             | 13 ++++++-------
>   drivers/macintosh/via-pmu-led.c       |  4 ++--
>   8 files changed, 14 insertions(+), 15 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
> index 4354684..ca5139e 100644
> --- a/arch/powerpc/boot/dts/mpc8315erdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
> @@ -472,7 +472,7 @@
>
>   		hdd {
>   			gpios = <&mcu_pio 1 0>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>   		};
>   	};
>   };
> diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
> index 2b4b653..e326139 100644
> --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
> @@ -496,7 +496,7 @@
>
>   		hdd {
>   			gpios = <&mcu_pio 1 0>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>   		};
>   	};
>   };
> diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
> index 74b6a53..71842fc 100644
> --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
> @@ -480,7 +480,7 @@
>
>   		hdd {
>   			gpios = <&mcu_pio 1 0>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>   		};
>   	};
>   };
> diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
> index 3b5cbac..e442a29 100644
> --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
> @@ -446,7 +446,7 @@
>
>   		hdd {
>   			gpios = <&mcu_pio 1 0>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>   		};
>   	};
>   };
> diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
> index ea8705f..3f6c9a6 100644
> --- a/arch/powerpc/configs/pmac32_defconfig
> +++ b/arch/powerpc/configs/pmac32_defconfig
> @@ -158,7 +158,7 @@ CONFIG_ADB=y
>   CONFIG_ADB_CUDA=y
>   CONFIG_ADB_PMU=y
>   CONFIG_ADB_PMU_LED=y
> -CONFIG_ADB_PMU_LED_IDE=y
> +CONFIG_ADB_PMU_LED_DISK=y
>   CONFIG_PMAC_APM_EMU=m
>   CONFIG_PMAC_MEDIABAY=y
>   CONFIG_PMAC_BACKLIGHT=y
> diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
> index 99ccbeba..1dde0be 100644
> --- a/arch/powerpc/configs/ppc6xx_defconfig
> +++ b/arch/powerpc/configs/ppc6xx_defconfig
> @@ -442,7 +442,7 @@ CONFIG_ADB=y
>   CONFIG_ADB_CUDA=y
>   CONFIG_ADB_PMU=y
>   CONFIG_ADB_PMU_LED=y
> -CONFIG_ADB_PMU_LED_IDE=y
> +CONFIG_ADB_PMU_LED_DISK=y
>   CONFIG_PMAC_APM_EMU=y
>   CONFIG_PMAC_MEDIABAY=y
>   CONFIG_PMAC_BACKLIGHT=y
> diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
> index 3e8b29e..d28690f 100644
> --- a/drivers/macintosh/Kconfig
> +++ b/drivers/macintosh/Kconfig
> @@ -96,19 +96,18 @@ config ADB_PMU_LED
>   	  Support the front LED on Power/iBooks as a generic LED that can
>   	  be triggered by any of the supported triggers. To get the
>   	  behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
> -	  and the ide-disk LED trigger and configure appropriately through
> -	  sysfs.
> +	  and the disk LED trigger and configure appropriately through sysfs.
>
> -config ADB_PMU_LED_IDE
> -	bool "Use front LED as IDE LED by default"
> +config ADB_PMU_LED_DISK
> +	bool "Use front LED as DISK LED by default"
>   	depends on ADB_PMU_LED
>   	depends on LEDS_CLASS
>   	depends on IDE_GD_ATA
>   	select LEDS_TRIGGERS
> -	select LEDS_TRIGGER_IDE_DISK
> +	select LEDS_TRIGGER_DISK
>   	help
> -	  This option makes the front LED default to the IDE trigger
> -	  so that it blinks on IDE activity.
> +	  This option makes the front LED default to the disk trigger
> +	  so that it blinks on disk activity.
>
>   config PMAC_SMU
>   	bool "Support for SMU  based PowerMacs"
> diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
> index 19c3718..ae067ab 100644
> --- a/drivers/macintosh/via-pmu-led.c
> +++ b/drivers/macintosh/via-pmu-led.c
> @@ -73,8 +73,8 @@ static void pmu_led_set(struct led_classdev *led_cdev,
>
>   static struct led_classdev pmu_led = {
>   	.name = "pmu-led::front",
> -#ifdef CONFIG_ADB_PMU_LED_IDE
> -	.default_trigger = "ide-disk",
> +#ifdef CONFIG_ADB_PMU_LED_DISK
> +	.default_trigger = "disk-activity",
>   #endif
>   	.brightness_set = pmu_led_set,
>   };
>


-- 
Best regards,
Jacek Anaszewski