From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Paul Gortmaker <paul.gortmaker@windriver.com>,
<linux-kernel@vger.kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: Re: [PATCH 1/6] memory: atmel-sdramc: make it explicitly non-modular
Date: Fri, 17 Jun 2016 09:30:59 +0200 [thread overview]
Message-ID: <5763A733.2020607@atmel.com> (raw)
In-Reply-To: <20160617003748.12188-2-paul.gortmaker@windriver.com>
Le 17/06/2016 02:37, Paul Gortmaker a écrit :
> The Kconfig for this option is currently:
>
> config ATMEL_SDRAMC
> bool "Atmel (Multi-port DDR-)SDRAM Controller"
>
> ...meaning that it currently is not being built as a module by anyone.
> Lets remove the couple traces of modularity, so that when reading the
> driver there is no doubt it is builtin-only.
>
> Since module_init translates to device_initcall in the non-modular
> case, the init ordering remains unchanged with this commit. An
> alternate init level might be worth considering at a later date.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We also delete the MODULE_LICENSE tag etc. since all that information
> was (or is now) contained at the top of the file in the comments.
>
> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
> ---
> drivers/memory/atmel-sdramc.c | 11 ++++-------
> 1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c
> index a3ebc8a87479..53a341f3b305 100644
> --- a/drivers/memory/atmel-sdramc.c
> +++ b/drivers/memory/atmel-sdramc.c
> @@ -1,6 +1,8 @@
> /*
> * Atmel (Multi-port DDR-)SDRAM Controller driver
> *
> + * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> + *
> * Copyright (C) 2014 Atmel
> *
> * This program is free software: you can redistribute it and/or modify
> @@ -20,7 +22,7 @@
> #include <linux/clk.h>
> #include <linux/err.h>
> #include <linux/kernel.h>
> -#include <linux/module.h>
> +#include <linux/init.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
>
> @@ -48,7 +50,6 @@ static const struct of_device_id atmel_ramc_of_match[] = {
> { .compatible = "atmel,sama5d3-ddramc", .data = &sama5d3_caps, },
> {},
> };
> -MODULE_DEVICE_TABLE(of, atmel_ramc_of_match);
>
> static int atmel_ramc_probe(struct platform_device *pdev)
> {
> @@ -90,8 +91,4 @@ static int __init atmel_ramc_init(void)
> {
> return platform_driver_register(&atmel_ramc_driver);
> }
> -module_init(atmel_ramc_init);
> -
> -MODULE_LICENSE("GPL v2");
> -MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
> -MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller");
> +device_initcall(atmel_ramc_init);
>
--
Nicolas Ferre
next prev parent reply other threads:[~2016-06-17 7:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-17 0:37 [PATCH 0/6] memory: remove modular usage from non-modular drivers Paul Gortmaker
2016-06-17 0:37 ` [PATCH 1/6] memory: atmel-sdramc: make it explicitly non-modular Paul Gortmaker
2016-06-17 7:30 ` Nicolas Ferre [this message]
2016-06-21 15:17 ` Alexandre Belloni
2016-06-17 0:37 ` [PATCH 2/6] memory: mvebu-devbus: " Paul Gortmaker
2016-06-17 0:37 ` [PATCH 3/6] memory: omap-gpmc: " Paul Gortmaker
2016-06-17 7:26 ` Roger Quadros
2016-06-17 0:37 ` [PATCH 4/6] memory: tegra20-mc: " Paul Gortmaker
2016-06-17 0:37 ` [PATCH 5/6] memory: samsung/exynos-srom: " Paul Gortmaker
2016-06-20 7:50 ` Krzysztof Kozlowski
2016-06-17 0:37 ` [PATCH 6/6] memory: atmel-ebi: " Paul Gortmaker
2016-06-17 7:35 ` Nicolas Ferre
2016-06-17 7:38 ` Boris Brezillon
2016-06-21 15:18 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5763A733.2020607@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox