From: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Wolfram Sang <wsa@the-dreams.de>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <damm+renesas@opensource.se>,
Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Thao Phuong Le. Nguyen" <thao.nguyen.yb@rvc.renesas.com>,
"Hien Duy. Dang" <hien.dang.eb@rvc.renesas.com>,
Toru Oishi <toru.oishi.zj@rvc.renesas.com>
Subject: [PATCH 3/4] arm64: dts: r8a7795: Add R-Car Gen3 thermal support
Date: Sun, 19 Jun 2016 10:35:53 +0700 [thread overview]
Message-ID: <57661319.7040308@rvc.renesas.com> (raw)
In-Reply-To: <576612DE.3070204@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 86 ++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index c14e89a..db203db 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -25,6 +25,9 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
+ tsc0 = &tsc1;
+ tsc1 = &tsc2;
+ tsc2 = &tsc3;
};
psci {
@@ -1620,5 +1623,88 @@
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
+
+ tsc1: thermal@e6198000 {
+ compatible = "renesas,thermal-r8a7795",
+ "renesas,rcar-gen3-thermal";
+ reg = <0 0xe6198000 0 0x5c>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ #thermal-sensor-cells = <0>;
+ status = "okay";
+ };
+
+ tsc2: thermal@e61a0000 {
+ compatible = "renesas,thermal-r8a7795",
+ "renesas,rcar-gen3-thermal";
+ reg = <0 0xe61a0000 0 0x5c>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ #thermal-sensor-cells = <0>;
+ status = "okay";
+ };
+
+ tsc3: thermal@e61a8000 {
+ compatible = "renesas,thermal-r8a7795",
+ "renesas,rcar-gen3-thermal";
+ reg = <0 0xe61a8000 0 0x5c>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ #thermal-sensor-cells = <0>;
+ status = "okay";
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ /* sensor ID */
+ thermal-sensors = <&tsc1>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ /* sensor ID */
+ thermal-sensors = <&tsc2>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ /* sensor ID */
+ thermal-sensors = <&tsc3>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2016-06-19 3:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-19 3:31 [PATCH 0/4] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal support Khiem Nguyen
2016-06-19 3:33 ` [PATCH 1/4] thermal: rcar_gen3_thermal: Document the R-Car Gen3 thermal bindings Khiem Nguyen
2016-06-20 7:49 ` Geert Uytterhoeven
2016-06-19 3:34 ` [PATCH 2/4] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver support Khiem Nguyen
2016-06-19 3:35 ` Khiem Nguyen [this message]
2016-06-19 3:36 ` [PATCH 4/4] arm64: defconfig: Enable R-Car Gen3 thermal support Khiem Nguyen
2016-06-20 1:44 ` [PATCH 2/4] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver support Kuninori Morimoto
2016-09-03 2:10 ` Khiem Nguyen
2016-06-19 4:12 ` [PATCH/RFC 0/3] thermal: rcar_gen3_thermal: Apply shared interrupts for thermal sensors Khiem Nguyen
2016-06-19 4:13 ` [PATCH/RFC 1/3] thermal: rcar_gen3_thermal: Modify the shared irq with initialization Khiem Nguyen
2016-06-19 4:15 ` [PATCH/RFC 2/3] thermal: rcar_gen3_thermal: Modify the way to detect the interrupts Khiem Nguyen
2016-06-19 4:16 ` [PATCH/RFC 3/3] arm64: dts: r8a7795: Support shared irq for thermal sensors Khiem Nguyen
2016-06-20 7:53 ` Geert Uytterhoeven
2016-06-20 7:40 ` [PATCH 0/4] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal support Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57661319.7040308@rvc.renesas.com \
--to=khiem.nguyen.xt@rvc.renesas.com \
--cc=damm+renesas@opensource.se \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=geert+renesas@glider.be \
--cc=hien.dang.eb@rvc.renesas.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thao.nguyen.yb@rvc.renesas.com \
--cc=toru.oishi.zj@rvc.renesas.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox