Re: [PATCH 3/3] arm: dts: thermal: add thermal/auxadc node.

[Keerthy <a0393675@ti.com>]

On Thursday 07 July 2016 02:36 PM, Dawei Chien wrote:
> This adds the thermal controller and auxadc nodes
> to the Mediatek MT2701 dtsi file.
>
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> ---
> This patch depned on:
> https://patchwork.kernel.org/patch/9213545/
> ---
>   arch/arm/boot/dts/mt2701.dtsi |   43 +++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> index 2ac8b50..0834a23 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -77,6 +77,36 @@
>   		#clock-cells = <0>;
>   	};
>
> +	thermal-zones {
> +		cpu_thermal: cpu_thermal {
> +			polling-delay-passive = <1000>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +
> +			thermal-sensors = <&thermal 0>;
> +			sustainable-power = <1000>;
> +
> +			trips {
> +				threshold: trip-point@0 {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				target: trip-point@1 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu_crit@0 {
> +					temperature = <115000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +

are there any corresponding cooling-maps?

>   	timer {
>   		compatible = "arm,armv7-timer";
>   		interrupt-parent = <&gic>;
> @@ -183,4 +213,17 @@
>   		clocks = <&uart_clk>;
>   		status = "disabled";
>   	};
> +
> +	thermal: thermal@1100b000 {
> +		#thermal-sensor-cells = <0>;
> +		compatible = "mediatek,mt2701-thermal";
> +		reg = <0 0x1100b000 0 0x1000>;
> +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
> +		clock-names = "therm", "auxadc";
> +		resets = <&pericfg 0x10>;
> +		reset-names = "therm";
> +		mediatek,auxadc = <&auxadc>;
> +		mediatek,apmixedsys = <&apmixedsys>;
> +	};
>   };
>