From: Jesus Delgado <jdelgado@gmail.com>
To: Brad Barnett <bahb@l8r.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Acer Aspire 1691WCLi no boot problem
Date: Fri, 29 Jul 2005 12:01:26 -0500 [thread overview]
Message-ID: <5786143705072910011b280f67@mail.gmail.com> (raw)
In-Reply-To: <20050729122015.73165b54@be.back.l8r.net>
Hi all:
Iam have is the same problems with emachines M6807.
Any Idea?
On 7/29/05, Brad Barnett <bahb@l8r.net> wrote:
>
>
>
> Hey,
>
> I have a very odd problem with an Acer Aspire 1691WCLi. This laptop will
> simply not boot with any Debian precompiled kernel, with the exception of
> Debian's 2.4.27-2 initrd kernel. I have compiled my own kernels, using a
> vast array of options, 2.6.11, 2.6.12, 2.6.12.3, 2.6.13-rc4 and 2.4.27,
> they also all fail in exactly the same way. I have tried with and without
> initrd, acpi, 386 or other processor options, as well as very lean,
> stripped down kernels. I have tried with both lilo and grub, but both
> result in the same hang.
>
> Lilo or grub boots the kernel, and I see the classic:
>
> boot: vmlinuz
> Loading vmlinuz.................................................
> BIOS data check successful
> Uncompressiong Linux... Ok. booting the kernel.
> _
>
>
> That's it. A screencap can be had here, although it does not tell much else:
>
> http://be.back.l8r.net:8000/no_boot.jpg
>
> Debian's 2.4.27-2 boots fine, and this is what really annoys me. I took
> Debian's 2.4.27-2 initrd config from /boot, ran make oldconfig on a fresh
> 2.4.27 tree (some minor options were different due to Debian's
> backpatching). This image _still_ would not boot.
>
> Does anyone have any suggestions? If needed, I could compile a few more
> kernels, change GCC versions (if anyone thinks that would help) and so on.
> However, my goal here is to get 2.6 working in order to support various
> bits of hardware on this laptop.
>
> There are very few bios options to change. :/
>
> Pentium M 725, 512M ram.
>
> LSPCI shows:
>
> 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
> 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML ExpressGraphics Controller (rev 03)
> 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
> 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
> 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
> 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
> 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
> 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
> 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
> 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
> 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
> 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
> 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
> 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
> 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
> 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
> 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
> 0000:06:01.0 CardBus bridge: Texas Instruments Texas Instruments PCIxx21/x515 Cardbus Controller
> 0000:06:01.2 FireWire (IEEE 1394): Texas Instruments Texas Instruments OHCI Compliant IEEE 1394 Host Controller
> 0000:06:01.3 Unknown mass storage controller: Texas Instruments Texas Instruments PCIxx21Integrated FlashMedia Controller
> 0000:06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
> 0000:06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet(rev 03)
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2005-07-29 17:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-29 16:20 Acer Aspire 1691WCLi no boot problem Brad Barnett
2005-07-29 17:01 ` Jesus Delgado [this message]
2005-07-31 21:35 ` Alexey Dobriyan
2005-08-02 17:21 ` Bill Davidsen
-- strict thread matches above, loose matches on Subject: below --
2005-07-29 16:20 Brad Barnett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5786143705072910011b280f67@mail.gmail.com \
--to=jdelgado@gmail.com \
--cc=bahb@l8r.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox