From: Jaehoon Chung <jh80.chung@samsung.com>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mmc: dw_mmc: remove parsing for each slot subnode
Date: Tue, 26 Jul 2016 09:49:37 +0900 [thread overview]
Message-ID: <5796B3A1.1050002@samsung.com> (raw)
In-Reply-To: <1468547254-805-1-git-send-email-shawn.lin@rock-chips.com>
On 07/15/2016 10:47 AM, Shawn Lin wrote:
> The intention to remove it comes from the conflict of
> what the mmc-core does with the way dw_mmc treats disable-wp.
> We could see that 'disable-wp' is supported by core but
> it's deprecated by dw_mmc as we don't expect it to be existed
> for each slot subnode but should be in the parent node. Based
> on searching for all the upstream dts using dw_mmc, we're
> confident that none of them use the deprecated way. Maybe
> we should take old dtb in consideration but it was a flag day
> since the time we was considering to take it away. The fact is
> that there are none of dts using the deprecated way since v3.18
> or even earlier. So personally I don't believe the old dtb
> would/could bootup current kernel(may not?). Let's remove it now.
>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Applied on my repository. Thanks!
Best Regards,
Jaehoon Chung
> ---
>
> drivers/mmc/host/dw_mmc.c | 43 -------------------------------------------
> 1 file changed, 43 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 2dfdc58..d0adddb 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2523,47 +2523,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -#ifdef CONFIG_OF
> -/* given a slot, find out the device node representing that slot */
> -static struct device_node *dw_mci_of_find_slot_node(struct dw_mci_slot *slot)
> -{
> - struct device *dev = slot->mmc->parent;
> - struct device_node *np;
> - const __be32 *addr;
> - int len;
> -
> - if (!dev || !dev->of_node)
> - return NULL;
> -
> - for_each_child_of_node(dev->of_node, np) {
> - addr = of_get_property(np, "reg", &len);
> - if (!addr || (len < sizeof(int)))
> - continue;
> - if (be32_to_cpup(addr) == slot->id)
> - return np;
> - }
> - return NULL;
> -}
> -
> -static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
> -{
> - struct device_node *np = dw_mci_of_find_slot_node(slot);
> -
> - if (!np)
> - return;
> -
> - if (of_property_read_bool(np, "disable-wp")) {
> - slot->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
> - dev_warn(slot->mmc->parent,
> - "Slot quirk 'disable-wp' is deprecated\n");
> - }
> -}
> -#else /* CONFIG_OF */
> -static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
> -{
> -}
> -#endif /* CONFIG_OF */
> -
> static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
> {
> struct mmc_host *mmc;
> @@ -2620,8 +2579,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
> if (host->pdata->caps2)
> mmc->caps2 = host->pdata->caps2;
>
> - dw_mci_slot_of_parse(slot);
> -
> ret = mmc_of_parse(mmc);
> if (ret)
> goto err_host_allocated;
>
prev parent reply other threads:[~2016-07-26 0:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20160715020607epcas1p1d7c7b7fd23c280be82d74d83225bf795@epcas1p1.samsung.com>
2016-07-15 1:47 ` [PATCH] mmc: dw_mmc: remove parsing for each slot subnode Shawn Lin
2016-07-26 0:49 ` Jaehoon Chung [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5796B3A1.1050002@samsung.com \
--to=jh80.chung@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox