From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Seung-Woo Kim <sw0312.kim@samsung.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, k.kozlowski@samsung.com,
thierry.reding@gmail.com, linux-pwm@vger.kernel.org,
Joonyoung Shim <jy0922.shim@samsung.com>
Subject: Re: [PATCH] pwm: samsung: fix to use lowest div for large enough modulation bits
Date: Wed, 03 Aug 2016 10:58:40 +0900 [thread overview]
Message-ID: <57A14FD0.9030905@samsung.com> (raw)
In-Reply-To: <1470133006-4272-1-git-send-email-sw0312.kim@samsung.com>
Hi,
On 08/02/2016 07:16 PM, Seung-Woo Kim wrote:
>>From pwm_samsung_calc_tin(), there is routine to find the lowest
> divider possible to generate lower frequency than requested one.
> But it is always possible to generate requested frequency with
> large enough modulation bits, so this patch fixes to use lowest
> div for the case. This patch removes following UBSAN warning:
>
> UBSAN: Undefined behaviour in drivers/pwm/pwm-samsung.c:197:13
> shift exponent 32 is too large for 32-bit type 'long unsigned int'
> [...]
> [<c0670248>] (ubsan_epilogue) from [<c06707b4>] (__ubsan_handle_shift_out_of_bounds+0xd8/0x120)
> [<c06707b4>] (__ubsan_handle_shift_out_of_bounds) from [<c0694b28>] (pwm_samsung_config+0x508/0x6a4)
> [<c0694b28>] (pwm_samsung_config) from [<c069286c>] (pwm_apply_state+0x174/0x40c)
> [<c069286c>] (pwm_apply_state) from [<c0b2e070>] (pwm_fan_probe+0xc8/0x488)
> [<c0b2e070>] (pwm_fan_probe) from [<c07ba8b0>] (platform_drv_probe+0x70/0x150)
> [...]
>
> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> ---
> The UBSAN warning from ARM is reported with the patch in following link:
> https://patchwork.kernel.org/patch/9189575/
> ---
> drivers/pwm/pwm-samsung.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
> index ada2d32..ff0def6 100644
> --- a/drivers/pwm/pwm-samsung.c
> +++ b/drivers/pwm/pwm-samsung.c
> @@ -193,9 +193,13 @@ static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
> * divider settings and choose the lowest divisor that can generate
> * frequencies lower than requested.
> */
> - for (div = variant->div_base; div < 4; ++div)
> - if ((rate >> (variant->bits + div)) < freq)
> - break;
> + if (fls(rate) <= variant->bits) {
> + div = variant->div_base;
It's reasonable to me not to check to decide div at above case.
> + } else {
> + for (div = variant->div_base; div < 4; ++div)
> + if ((rate >> (variant->bits + div)) < freq)
> + break;
> + }
>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Thanks.
next prev parent reply other threads:[~2016-08-03 1:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20160802102943epcas1p3d34d2c3536a094e2e8c91568eefd7cf8@epcas1p3.samsung.com>
2016-08-02 10:16 ` [PATCH] pwm: samsung: fix to use lowest div for large enough modulation bits Seung-Woo Kim
2016-08-03 1:58 ` Joonyoung Shim [this message]
2016-08-16 7:37 ` Krzysztof Kozlowski
2016-08-16 8:25 ` Seung-Woo Kim
2016-08-16 9:00 ` Tomasz Figa
2016-08-16 9:10 ` Krzysztof Kozlowski
2016-08-16 9:32 ` Tomasz Figa
2016-08-16 9:54 ` Seung-Woo Kim
2016-08-16 14:22 ` [PATCH v2] " Seung-Woo Kim
2016-08-16 16:25 ` Krzysztof Kozlowski
2016-09-05 6:53 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57A14FD0.9030905@samsung.com \
--to=jy0922.shim@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sw0312.kim@samsung.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox