[PATCH 1/2] ARM: dts: sunxi: Use constants for RTC clock indexes

[PATCH 1/2] ARM: dts: sunxi: Use constants for RTC clock indexes

[Samuel Holland]

The binding header provides descriptive names for the RTC clock indexes,
since the indexes were arbitrarily chosen by the binding, not by the
hardware. Let's use the names, so the meaning is clearer.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 arch/arm/boot/dts/sun6i-a31.dtsi                    | 12 +++++++-----
 arch/arm/boot/dts/sun8i-a23-a33.dtsi                |  8 +++++---
 .../arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts |  4 ++--
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts           |  2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts          |  4 ++--
 arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts       |  2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts            |  4 ++--
 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts        |  4 ++--
 arch/arm/boot/dts/sun8i-r40.dtsi                    |  8 +++++---
 arch/arm/boot/dts/sun8i-v3s.dtsi                    |  6 ++++--
 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi       |  4 ++--
 arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi     |  4 ++--
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                  | 13 ++++++++-----
 13 files changed, 43 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 715d74854449..70e634b37aae 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
@@ -598,7 +599,7 @@ ohci2: usb@1c1c400 {
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -612,7 +613,8 @@ pio: pinctrl@1c20800 {
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1319,7 +1321,7 @@ prcm@1f01400 {
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&rtc 0>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
@@ -1354,7 +1356,7 @@ apb0_gates: apb0_gates_clk {
 			ir_clk: ir_clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&rtc 0>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
@@ -1385,7 +1387,7 @@ r_pio: pinctrl@1f02c00 {
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 4461d5098b20..1a262a05fdcb 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -44,6 +44,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
@@ -329,7 +330,7 @@ ohci0: usb@1c1a400 {
 
 		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -340,7 +341,8 @@ pio: pinctrl@1c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupt-parent = <&r_intc>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -810,7 +812,7 @@ r_pio: pinctrl@1f02c00 {
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			resets = <&apb0_rst 0>;
 			gpio-controller;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d5c7b7984d85..c06b217a8af5 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -106,7 +106,7 @@ poweroff {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -181,7 +181,7 @@ &uart1 {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index cd9f655e4f92..7721a7a50d45 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -125,7 +125,7 @@ spdif_out: spdif-out {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 8e7dfcffe1fb..23aae3eaed79 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -90,7 +90,7 @@ reg_vdd_sys: vdd-sys {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -151,7 +151,7 @@ &uart2 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index cd3df12b6573..9e1a33f94cad 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -127,7 +127,7 @@ &uart3 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..42cd1131adf3 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -46,7 +46,7 @@ reg_vdd_cpux: gpio-regulator {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -147,7 +147,7 @@ &uart3 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index bf5b5e2f6168..bc394686fedb 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -91,7 +91,7 @@ reg_vcc5v0: vcc5v0 {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -283,7 +283,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_aldo3>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 03d3e5f45a09..75d55a46b50e 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
 #include <dt-bindings/clock/sun8i-tcon-top.h>
@@ -485,7 +486,7 @@ spi3: spi@1c1f000 {
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -504,7 +505,8 @@ pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1231,7 +1233,7 @@ hdmi: hdmi@1ee0000 {
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu CLK_HDMI>, <&rtc 0>;
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 084323d5c61c..db194c606fdc 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -321,7 +322,7 @@ usbphy: phy@1c19400 {
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-v3s-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -342,7 +343,8 @@ pio: pinctrl@1c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index d03f5853ef7b..d4627bc7c122 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -101,7 +101,7 @@ reg_gmac_3v3: gmac-3v3 {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -221,7 +221,7 @@ &uart1 {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
index fc67e30fe212..60804b0e6c56 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -22,7 +22,7 @@ wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -124,7 +124,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index d7e9f977f986..09aefb4e90f8 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
@@ -386,7 +387,7 @@ ohci3: usb@1c1d400 {
 		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -398,7 +399,8 @@ pio: pinctrl@1c20800 {
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -818,7 +820,7 @@ hdmi: hdmi@1ee0000 {
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>, <&rtc 0>;
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
@@ -878,7 +880,7 @@ r_intc: interrupt-controller@1f00c00 {
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -931,7 +933,8 @@ r_pio: pinctrl@1f02c00 {
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
-- 
2.35.1

[PATCH 2/2] arm64: dts: allwinner: Use constants for RTC clock indexes

[Samuel Holland]

The binding header provides descriptive names for the RTC clock indexes,
since the indexes were arbitrarily chosen by the binding, not by the
hardware. Let's use the names, so the meaning is clearer.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 .../boot/dts/allwinner/sun50i-a64-amarula-relic.dts  |  2 +-
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts   |  4 ++--
 .../boot/dts/allwinner/sun50i-a64-nanopi-a64.dts     |  2 +-
 .../boot/dts/allwinner/sun50i-a64-orangepi-win.dts   |  4 ++--
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 10 ++++++----
 .../boot/dts/allwinner/sun50i-h6-orangepi-3.dts      |  4 ++--
 .../boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts  |  4 ++--
 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi   |  2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi         | 12 +++++++-----
 9 files changed, 24 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index f17cc89f472d..8233582f6288 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -58,7 +58,7 @@ ov5640_ep: endpoint {
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 997a19372683..e6d5bc0f7a61 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -56,7 +56,7 @@ led-2 {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -355,7 +355,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo2>;
 		vddio-supply = <&reg_dldo4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index e47ff06a6fa9..0af6dcdf7515 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -43,7 +43,7 @@ led {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index c519d9fa6967..e2f963332925 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -71,7 +71,7 @@ reg_usb1_vbus: usb1-vbus {
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -369,7 +369,7 @@ &uart1 {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo2>;
 		vddio-supply = <&reg_dldo4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index de77c87481fd..77b5349f6087 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -4,6 +4,7 @@
 //    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -660,7 +661,7 @@ ohci1: usb@1c1b400 {
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun50i-a64-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -673,7 +674,8 @@ pio: pinctrl@1c20800 {
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -1226,7 +1228,7 @@ hdmi: hdmi@1ee0000 {
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>, <&rtc 0>;
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
@@ -1287,7 +1289,7 @@ r_intc: interrupt-controller@1f00c00 {
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index c45d7b7fb39a..6fc65e8db220 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -86,7 +86,7 @@ reg_vcc_wifi_io: vcc-wifi-io {
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;
@@ -314,7 +314,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
 		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index e8770858b5d0..fb31dcb1cb6d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -13,7 +13,7 @@ aliases {
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 		post-power-on-delay-ms = <200>;
@@ -64,7 +64,7 @@ &uart1 {
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
 		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index edb71e4a0304..4903d6358112 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -78,7 +78,7 @@ spdif_out: spdif-out {
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index fbe94abbb1f9..5a28303d3d4c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
 #include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
@@ -237,7 +238,7 @@ ve_sram: sram-section@0 {
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-h6-ccu";
 			reg = <0x03001000 0x1000>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
 			clock-names = "hosc", "losc", "iosc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -317,7 +318,7 @@ pio: pinctrl@300b000 {
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -725,7 +726,7 @@ dwc3: usb@5200000 {
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_XHCI>,
 				 <&ccu CLK_BUS_XHCI>,
-				 <&rtc 0>;
+				 <&rtc CLK_OSC32K>;
 			clock-names = "ref", "bus_early", "suspend";
 			resets = <&ccu RST_BUS_XHCI>;
 			/*
@@ -931,7 +932,7 @@ rtc: rtc@7000000 {
 		r_ccu: clock@7010000 {
 			compatible = "allwinner,sun50i-h6-r-ccu";
 			reg = <0x07010000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -960,7 +961,8 @@ r_pio: pinctrl@7022000 {
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
-- 
2.35.1

Re: [PATCH 1/2] ARM: dts: sunxi: Use constants for RTC clock indexes

[Jernej Škrabec]

Dne torek, 07. junij 2022 ob 03:24:37 CEST je Samuel Holland napisal(a):
> The binding header provides descriptive names for the RTC clock indexes,
> since the indexes were arbitrarily chosen by the binding, not by the
> hardware. Let's use the names, so the meaning is clearer.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

Re: [PATCH 2/2] arm64: dts: allwinner: Use constants for RTC clock indexes

[Jernej Škrabec]

Dne torek, 07. junij 2022 ob 03:24:38 CEST je Samuel Holland napisal(a):
> The binding header provides descriptive names for the RTC clock indexes,
> since the indexes were arbitrarily chosen by the binding, not by the
> hardware. Let's use the names, so the meaning is clearer.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

Re: Re: [PATCH 1/2] ARM: dts: sunxi: Use constants for RTC clock indexes

[Jernej Škrabec]

Dne nedelja, 12. junij 2022 ob 22:45:47 CEST je Jernej Škrabec napisal(a):
> Dne torek, 07. junij 2022 ob 03:24:37 CEST je Samuel Holland napisal(a):
> > The binding header provides descriptive names for the RTC clock indexes,
> > since the indexes were arbitrarily chosen by the binding, not by the
> > hardware. Let's use the names, so the meaning is clearer.
> > 
> > Signed-off-by: Samuel Holland <samuel@sholland.org>
> 
> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Applied both, thanks!

Best regards,
Jernej