* [PATCH] extcon: Restructure multi-line comments to follow codingstyle
@ 2016-12-07 11:59 ` Srikant Ritolia
2016-12-07 13:36 ` Chanwoo Choi
0 siblings, 1 reply; 2+ messages in thread
From: Srikant Ritolia @ 2016-12-07 11:59 UTC (permalink / raw)
To: MyungJoo Ham, Chanwoo Choi, Srikant Ritolia
Cc: linux-kernel, vidushi.koul, srikant.ritolia
Aligning all block comments in extcon subsystem as per linux coding style.
Found using checkpatch.pl script.
Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com>
---
drivers/extcon/extcon-max14577.c | 6 ++++--
drivers/extcon/extcon-max77693.c | 12 ++++++++----
drivers/extcon/extcon-max77843.c | 24 ++++++++++++++++--------
drivers/extcon/extcon-rt8973a.c | 6 ++++--
drivers/extcon/extcon-sm5502.c | 6 ++++--
5 files changed, 36 insertions(+), 18 deletions(-)
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index 12e26c4..0a4e12a 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -531,8 +531,10 @@ static int max14577_parse_irq(struct max14577_muic_info *info, int irq_type)
case MAX14577_IRQ_INT1_ADC:
case MAX14577_IRQ_INT1_ADCLOW:
case MAX14577_IRQ_INT1_ADCERR:
- /* Handle all of accessory except for
- type of charger accessory */
+ /*
+ * Handle all of accessory except for
+ * type of charger accessory
+ */
info->irq_adc = true;
return 1;
case MAX14577_IRQ_INT2_CHGTYP:
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 68dbcb8..91d3313 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -188,8 +188,10 @@ enum max77693_muic_acc_type {
MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE,
MAX77693_MUIC_ADC_OPEN,
- /* The below accessories have same ADC value so ADCLow and
- ADC1K bit is used to separate specific accessory */
+ /*
+ * The below accessories have same ADC value so ADCLow and
+ * ADC1K bit is used to separate specific accessory
+ */
/* ADC|VBVolot|ADCLow|ADC1K| */
MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */
MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */
@@ -970,8 +972,10 @@ static void max77693_muic_irq_work(struct work_struct *work)
case MAX77693_MUIC_IRQ_INT1_ADC_LOW:
case MAX77693_MUIC_IRQ_INT1_ADC_ERR:
case MAX77693_MUIC_IRQ_INT1_ADC1K:
- /* Handle all of accessory except for
- type of charger accessory */
+ /*
+ * Handle all of accessory except for
+ * type of charger accessory
+ */
ret = max77693_muic_adc_handler(info);
break;
case MAX77693_MUIC_IRQ_INT2_CHGTYP:
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 5d11fdf..f618f51 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -97,8 +97,10 @@ enum max77843_muic_accessory_type {
MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
MAX77843_MUIC_ADC_OPEN,
- /* The blow accessories should check
- not only ADC value but also ADC1K and VBVolt value. */
+ /*
+ * The blow accessories should check
+ * not only ADC value but also ADC1K and VBVolt value.
+ */
/* Offset|ADC1K|VBVolt| */
MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */
MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */
@@ -265,16 +267,20 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
/* Check GROUND accessory with charger cable */
if (adc == MAX77843_MUIC_ADC_GROUND) {
if (chg_type == MAX77843_MUIC_CHG_NONE) {
- /* The following state when charger cable is
+ /*
+ * The following state when charger cable is
* disconnected but the GROUND accessory still
- * connected */
+ * connected
+ */
*attached = false;
cable_type = info->prev_chg_type;
info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
} else {
- /* The following state when charger cable is
- * connected on the GROUND accessory */
+ /*
+ * The following state when charger cable is
+ * connected on the GROUND accessory
+ */
*attached = true;
cable_type = MAX77843_MUIC_CHG_GND;
info->prev_chg_type = MAX77843_MUIC_CHG_GND;
@@ -299,11 +305,13 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
} else {
*attached = true;
- /* Offset|ADC1K|VBVolt|
+ /*
+ * Offset|ADC1K|VBVolt|
* 0x1| 0| 0| USB-HOST
* 0x1| 0| 1| USB-HOST with VB
* 0x1| 1| 0| MHL
- * 0x1| 1| 1| MHL with VB */
+ * 0x1| 1| 1| MHL with VB
+ */
/* Get ADC1K register bit */
gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
MAX77843_MUIC_STATUS1_ADC1K_MASK);
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index 174c388..3e882aa 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -142,8 +142,10 @@ enum rt8973a_muic_acc_type {
RT8973A_MUIC_ADC_UNKNOWN_ACC_5,
RT8973A_MUIC_ADC_OPEN = 0x1f,
- /* The below accessories has same ADC value (0x1f).
- So, Device type1 is used to separate specific accessory. */
+ /*
+ * The below accessories has same ADC value (0x1f).
+ * So, Device type1 is used to separate specific accessory.
+ */
/* |---------|--ADC| */
/* | [7:5]|[4:0]| */
RT8973A_MUIC_ADC_USB = 0x3f, /* | 001|11111| */
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index b223256..106ef02 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -135,8 +135,10 @@ enum sm5502_muic_acc_type {
SM5502_MUIC_ADC_AUDIO_TYPE1,
SM5502_MUIC_ADC_OPEN = 0x1f,
- /* The below accessories have same ADC value (0x1f or 0x1e).
- So, Device type1 is used to separate specific accessory. */
+ /*
+ * The below accessories have same ADC value (0x1f or 0x1e).
+ * So, Device type1 is used to separate specific accessory.
+ */
/* |---------|--ADC| */
/* | [7:5]|[4:0]| */
SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* | 001|11110| */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread