From: Chanwoo Choi <cw00.choi@samsung.com>
To: Hans de Goede <hdegoede@redhat.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/8] extcon: axp288: Remove unnecessary irq?_en register writes
Date: Mon, 19 Dec 2016 15:51:30 +0900 [thread overview]
Message-ID: <58578372.8000909@samsung.com> (raw)
In-Reply-To: <20161219001313.13402-7-hdegoede@redhat.com>
Hi Hans,
On 2016년 12월 19일 09:13, Hans de Goede wrote:
> Setting the irq_enable bits is taken care of by the irq chip when we
> request the irqs and the driver should not be meddling with the
> irq?_en registers itself.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/extcon/extcon-axp288.c | 19 +++----------------
> 1 file changed, 3 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index 7aec413..a27ee68 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -70,12 +70,6 @@
> #define DET_STAT_CDP 2
> #define DET_STAT_DCP 3
>
> -/* IRQ enable-1 register */
> -#define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2))
> -
> -/* IRQ enable-6 register */
> -#define BC12_IRQ_CFG_MASK BIT(1)
> -
> enum axp288_extcon_reg {
> AXP288_PS_STAT_REG = 0x00,
> AXP288_PS_BOOT_REASON_REG = 0x02,
> @@ -83,8 +77,6 @@ enum axp288_extcon_reg {
> AXP288_BC_VBUS_CNTL_REG = 0x2d,
> AXP288_BC_USB_STAT_REG = 0x2e,
> AXP288_BC_DET_STAT_REG = 0x2f,
> - AXP288_PWRSRC_IRQ_CFG_REG = 0x40,
> - AXP288_BC12_IRQ_CFG_REG = 0x45,
> };
>
> enum axp288_mux_select {
> @@ -242,15 +234,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
> +static void axp288_extcon_enable(struct axp288_extcon_info *info)
> {
> - /* Unmask VBUS interrupt */
> - regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
> - PWRSRC_IRQ_CFG_MASK);
> regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
> BC_GLOBAL_RUN, 0);
> - /* Unmask the BC1.2 complete interrupts */
> - regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
> /* Enable the charger detection logic */
> regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
> BC_GLOBAL_RUN, BC_GLOBAL_RUN);
> @@ -327,8 +314,8 @@ static int axp288_extcon_probe(struct platform_device *pdev)
> }
> }
>
> - /* Enable interrupts */
> - axp288_extcon_enable_irq(info);
> + /* Start charger cable type detection */
> + axp288_extcon_enable(info);
>
> return 0;
> }
>
Looks good to me.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Regards,
Chanwoo Choi
next prev parent reply other threads:[~2016-12-19 6:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20161219001318epcas5p1884657998ce4dd35c8ef8094fe00904f@epcas5p1.samsung.com>
2016-12-19 0:13 ` [PATCH 1/8] extcon: axp288: Remove dependency on non-existing platform_data Hans de Goede
2016-12-19 0:13 ` [PATCH 2/8] extcon: axp288: Remove usb_phy notification code Hans de Goede
2016-12-19 6:54 ` Chanwoo Choi
2016-12-19 0:13 ` [PATCH 3/8] extcon: axp288: Simplify axp288_handle_chrg_det_event Hans de Goede
2016-12-19 6:10 ` Chanwoo Choi
2016-12-19 0:13 ` [PATCH 4/8] extcon: axp288: Fix possibly reporting 2 cables in state true Hans de Goede
2016-12-19 6:27 ` Chanwoo Choi
2016-12-19 0:13 ` [PATCH 5/8] extcon: axp288: Make a couple of messages dev_info instead of dev_dbg Hans de Goede
2016-12-19 6:31 ` Chanwoo Choi
2016-12-19 0:13 ` [PATCH 6/8] extcon: axp288: Use vbus-valid instead of -present to determine cable presence Hans de Goede
2016-12-19 6:36 ` Chanwoo Choi
2016-12-19 0:13 ` [PATCH 7/8] extcon: axp288: Remove unnecessary irq?_en register writes Hans de Goede
2016-12-19 6:51 ` Chanwoo Choi [this message]
2016-12-19 0:13 ` [PATCH 8/8] extcon: axp288: Fix the module not auto-loading Hans de Goede
2016-12-19 6:51 ` Chanwoo Choi
2016-12-19 6:10 ` [PATCH 1/8] extcon: axp288: Remove dependency on non-existing platform_data Chanwoo Choi
2016-12-19 6:58 ` Chanwoo Choi
2016-12-19 8:18 ` Hans de Goede
2016-12-19 8:22 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58578372.8000909@samsung.com \
--to=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox