* [PATCH v3 0/5] Add touch key driver support for TM2 [not found] <CGME20170106035913epcas5p2b7d66596e467c6169786eea56beb8ffc@epcas5p2.samsung.com> @ 2017-01-06 3:59 ` Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee ` (4 more replies) 0 siblings, 5 replies; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc Hi, This patchset adds support for the tm2 touchkey device. The driver has been ported from Tizen Kernel, originally written by Beomho. I ported it to the latest mainline Kernel. This patch need to apply after this one: https://lkml.org/lkml/2016/12/29/319 Changes in v3: - Changed the commit ordering, the tm2-touchkey related patches are the last 3. - Added Chanwoo's patch which fixes the wrong voltage of ldo23 and ldo25. - Andi (patch 3) moves the ldo31 and ldo38 in the tm2 and tm2e files as they have different values. Changes in v2: - fixed reviews from Javier, Dmitry - refactored power enable/disable functions. - reordered signed-offs in patch 2, while patch 4 is left as it was as Andi copy pasted the node to the new tm2.dts file - added Jarvier's (patch 1,2,4) and Krzysztof's (patch 4) reviews and Rob's Ack - patch 3 diff has been generated with -B50% Andi Shyti (1): arm64: dts: exynos: make tm2 and tm2e independent from each other Chanwoo Choi (1): arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee (3): input: Add support for the tm2 touchkey device driver input: tm2-touchkey: Add touchkey driver support for TM2 arm64: dts: exynos: Add tm2 touchkey node .../bindings/input/samsung,tm2-touchkey.txt | 27 + .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 ++++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1113 +------------------ arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 32 +- drivers/input/keyboard/Kconfig | 11 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tm2-touchkey.c | 280 +++++ 7 files changed, 1469 insertions(+), 1113 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi create mode 100644 drivers/input/keyboard/tm2-touchkey.c -- 2.7.4 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee @ 2017-01-06 3:59 ` Jaechul Lee 2017-01-06 7:05 ` Krzysztof Kozlowski 2017-01-06 3:59 ` [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Jaechul Lee ` (3 subsequent siblings) 4 siblings, 1 reply; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc From: Chanwoo Choi <cw00.choi@samsung.com> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++--- arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ---------- 2 files changed, 4 insertions(+), 13 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3b5215c..e8971f4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -504,9 +504,9 @@ }; ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.2V_AP"; + regulator-name = "CAM_SEN_CORE_1.05V_AP"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1050000>; }; ldo24_reg: LDO24 { @@ -516,9 +516,10 @@ }; ldo25_reg: LDO25 { - regulator-name = "CAM_SEN_A2.8V_AP"; + regulator-name = "UNUSED_LDO25"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-off; }; ldo26_reg: LDO26 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 1db4e7f..854c583 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -18,16 +18,6 @@ compatible = "samsung,tm2e", "samsung,exynos5433"; }; -&ldo23_reg { - regulator-name = "CAM_SEN_CORE_1.025V_AP"; - regulator-max-microvolt = <1050000>; -}; - -&ldo25_reg { - regulator-name = "UNUSED_LDO25"; - regulator-always-off; -}; - &ldo31_reg { regulator-name = "TSP_VDD_1.8V_AP"; regulator-min-microvolt = <1800000>; -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee @ 2017-01-06 7:05 ` Krzysztof Kozlowski 2017-01-06 7:20 ` Chanwoo Choi 0 siblings, 1 reply; 15+ messages in thread From: Krzysztof Kozlowski @ 2017-01-06 7:05 UTC (permalink / raw) To: Jaechul Lee Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote: > From: Chanwoo Choi <cw00.choi@samsung.com> > > This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. Please describe what is exactly wrong and how it affects the system/user. This is going to the fixes so it needs a good explanation. > > Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++--- > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ---------- > 2 files changed, 4 insertions(+), 13 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > index 3b5215c..e8971f4 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -504,9 +504,9 @@ > }; > > ldo23_reg: LDO23 { > - regulator-name = "CAM_SEN_CORE_1.2V_AP"; > + regulator-name = "CAM_SEN_CORE_1.05V_AP"; > regulator-min-microvolt = <1050000>; > - regulator-max-microvolt = <1200000>; > + regulator-max-microvolt = <1050000>; > }; > > ldo24_reg: LDO24 { > @@ -516,9 +516,10 @@ > }; > > ldo25_reg: LDO25 { > - regulator-name = "CAM_SEN_A2.8V_AP"; > + regulator-name = "UNUSED_LDO25"; > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + regulator-always-off; Don't add it. See my other patch. Best regards, Krzysztof > }; > > ldo26_reg: LDO26 { > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > index 1db4e7f..854c583 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > @@ -18,16 +18,6 @@ > compatible = "samsung,tm2e", "samsung,exynos5433"; > }; > > -&ldo23_reg { > - regulator-name = "CAM_SEN_CORE_1.025V_AP"; > - regulator-max-microvolt = <1050000>; > -}; > - > -&ldo25_reg { > - regulator-name = "UNUSED_LDO25"; > - regulator-always-off; > -}; > - > &ldo31_reg { > regulator-name = "TSP_VDD_1.8V_AP"; > regulator-min-microvolt = <1800000>; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 7:05 ` Krzysztof Kozlowski @ 2017-01-06 7:20 ` Chanwoo Choi 2017-01-06 8:50 ` Krzysztof Kozlowski 0 siblings, 1 reply; 15+ messages in thread From: Chanwoo Choi @ 2017-01-06 7:20 UTC (permalink / raw) To: Krzysztof Kozlowski, Jaechul Lee Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote: > On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote: >> From: Chanwoo Choi <cw00.choi@samsung.com> >> >> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. > > Please describe what is exactly wrong and how it affects the > system/user. This is going to the fixes so it needs a good explanation. When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E. [1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") After checking the highest version of schematic document of both TM2 and TM2E, there is no difference of ldo23/ldo25 on both TM2 and TM2E. - ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong. - ldo25 isn't used on TM2/TM2E. (not connected) Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board. this patch does not affect the operation to system/user. > >> >> Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> >> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> >> --- >> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++--- >> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ---------- >> 2 files changed, 4 insertions(+), 13 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> index 3b5215c..e8971f4 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> @@ -504,9 +504,9 @@ >> }; >> >> ldo23_reg: LDO23 { >> - regulator-name = "CAM_SEN_CORE_1.2V_AP"; >> + regulator-name = "CAM_SEN_CORE_1.05V_AP"; >> regulator-min-microvolt = <1050000>; >> - regulator-max-microvolt = <1200000>; >> + regulator-max-microvolt = <1050000>; >> }; >> >> ldo24_reg: LDO24 { >> @@ -516,9 +516,10 @@ >> }; >> >> ldo25_reg: LDO25 { >> - regulator-name = "CAM_SEN_A2.8V_AP"; >> + regulator-name = "UNUSED_LDO25"; >> regulator-min-microvolt = <2800000>; >> regulator-max-microvolt = <2800000>; >> + regulator-always-off; > > Don't add it. See my other patch. OK. After completing the kernel booting, the unused regulators will be off. > > Best regards, > Krzysztof > >> }; >> >> ldo26_reg: LDO26 { >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts >> index 1db4e7f..854c583 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts >> @@ -18,16 +18,6 @@ >> compatible = "samsung,tm2e", "samsung,exynos5433"; >> }; >> >> -&ldo23_reg { >> - regulator-name = "CAM_SEN_CORE_1.025V_AP"; >> - regulator-max-microvolt = <1050000>; >> -}; >> - >> -&ldo25_reg { >> - regulator-name = "UNUSED_LDO25"; >> - regulator-always-off; >> -}; >> - >> &ldo31_reg { >> regulator-name = "TSP_VDD_1.8V_AP"; >> regulator-min-microvolt = <1800000>; >> -- >> 2.7.4 >> > > > -- Best Regards, Chanwoo Choi S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 7:20 ` Chanwoo Choi @ 2017-01-06 8:50 ` Krzysztof Kozlowski 2017-01-06 9:06 ` Chanwoo Choi 0 siblings, 1 reply; 15+ messages in thread From: Krzysztof Kozlowski @ 2017-01-06 8:50 UTC (permalink / raw) To: Chanwoo Choi Cc: Krzysztof Kozlowski, Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On Fri, Jan 06, 2017 at 04:20:52PM +0900, Chanwoo Choi wrote: > On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote: > > On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote: > >> From: Chanwoo Choi <cw00.choi@samsung.com> > >> > >> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. > > > > Please describe what is exactly wrong and how it affects the > > system/user. This is going to the fixes so it needs a good explanation. > > When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E. > [1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") > > After checking the highest version of schematic document of both TM2 and TM2E, > there is no difference of ldo23/ldo25 on both TM2 and TM2E. > - ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong. > - ldo25 isn't used on TM2/TM2E. (not connected) > > Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board. > this patch does not affect the operation to system/user. If it does not affect anyone (including TM2/TM2E) then this do not have to be a fix. Am I right? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 8:50 ` Krzysztof Kozlowski @ 2017-01-06 9:06 ` Chanwoo Choi 2017-01-06 9:12 ` Krzysztof Kozlowski 0 siblings, 1 reply; 15+ messages in thread From: Chanwoo Choi @ 2017-01-06 9:06 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On 2017년 01월 06일 17:50, Krzysztof Kozlowski wrote: > On Fri, Jan 06, 2017 at 04:20:52PM +0900, Chanwoo Choi wrote: >> On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote: >>> On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote: >>>> From: Chanwoo Choi <cw00.choi@samsung.com> >>>> >>>> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. >>> >>> Please describe what is exactly wrong and how it affects the >>> system/user. This is going to the fixes so it needs a good explanation. >> >> When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E. >> [1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") >> >> After checking the highest version of schematic document of both TM2 and TM2E, >> there is no difference of ldo23/ldo25 on both TM2 and TM2E. >> - ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong. >> - ldo25 isn't used on TM2/TM2E. (not connected) >> >> Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board. >> this patch does not affect the operation to system/user. > > If it does not affect anyone (including TM2/TM2E) then this do not have > to be a fix. Am I right? This patch does not affect the TM2/TM2E's operation because ldo23/25 are not used on TM2/TM2E. Just fix the wrong information. -- Best Regards, Chanwoo Choi S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 2017-01-06 9:06 ` Chanwoo Choi @ 2017-01-06 9:12 ` Krzysztof Kozlowski 0 siblings, 0 replies; 15+ messages in thread From: Krzysztof Kozlowski @ 2017-01-06 9:12 UTC (permalink / raw) To: Chanwoo Choi Cc: Krzysztof Kozlowski, Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Andi Shyti, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On Fri, Jan 06, 2017 at 06:06:43PM +0900, Chanwoo Choi wrote: > On 2017년 01월 06일 17:50, Krzysztof Kozlowski wrote: > > On Fri, Jan 06, 2017 at 04:20:52PM +0900, Chanwoo Choi wrote: > >> On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote: > >>> On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote: > >>>> From: Chanwoo Choi <cw00.choi@samsung.com> > >>>> > >>>> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E. > >>> > >>> Please describe what is exactly wrong and how it affects the > >>> system/user. This is going to the fixes so it needs a good explanation. > >> > >> When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E. > >> [1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board") > >> > >> After checking the highest version of schematic document of both TM2 and TM2E, > >> there is no difference of ldo23/ldo25 on both TM2 and TM2E. > >> - ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong. > >> - ldo25 isn't used on TM2/TM2E. (not connected) > >> > >> Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board. > >> this patch does not affect the operation to system/user. > > > > If it does not affect anyone (including TM2/TM2E) then this do not have > > to be a fix. Am I right? > > This patch does not affect the TM2/TM2E's operation > because ldo23/25 are not used on TM2/TM2E. Just fix the wrong information. Ah, okay, thanks for explanation. Please just rebase on current next/dt64 (or for-next or just my https://patchwork.kernel.org/patch/9500153/) so the always-off property won't be copied. I'll take it then for v4.11. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other 2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee @ 2017-01-06 3:59 ` Jaechul Lee 2017-01-06 7:09 ` Krzysztof Kozlowski 2017-01-06 3:59 ` [PATCH v3 3/5] input: Add support for the tm2 touchkey device driver Jaechul Lee ` (2 subsequent siblings) 4 siblings, 1 reply; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc From: Andi Shyti <andi.shyti@samsung.com> Currently tm2e dts includes tm2 but there are some differences between the two boards and tm2 has some properties that tm2e doesn't have. That's why it's important to keep the two dts files independent and put all the commonalities in a tm2-common.dtsi file. At the current status the only two differences between the two dts files (besides the board name) are ldo31 and ldo38. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 +++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +- 3 files changed, 1163 insertions(+), 1130 deletions(-) create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi new file mode 100644 index 0000000..c43f9a3 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -0,0 +1,1118 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Common device tree source file for Samsung's TM2 and TM2E boards + * which are based on Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,tm2", "samsung,exynos5433"; + + aliases { + gsc0 = &gsc_0; + gsc1 = &gsc_1; + gsc2 = &gsc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + mshc0 = &mshc_0; + mshc2 = &mshc_2; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + }; + + volume-up-key { + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume-down-key { + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage-key { + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; + model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&bus_g2d_400 { + devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; + vdd-supply = <&buck4_reg>; + exynos,saturation-ratio = <10>; + status = "okay"; +}; + +&bus_g2d_266 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_gscl { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_hevc { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_jpeg { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_mscl { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc0 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc1 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc2 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&cmu_aud { + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; +}; + +&cmu_fsys { + assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, + <&cmu_top CLK_DIV_SCLK_USBDRD30>, + <&cmu_top CLK_DIV_SCLK_USBHOST30>; + assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <66700000>, <66700000>; +}; + +&cmu_gscl { + assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, + <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; +}; + +&cmu_mfc { + assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; +}; + +&cmu_mscl { + assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG>, + <&cmu_top CLK_MOUT_SCLK_JPEG_A>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + + i80-if-timings { + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13-pmic@66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 IRQ_TYPE_NONE>; + reg = <0x66>; + samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators: regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.05V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "UNUSED_LDO25"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-off; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * LDO31 differs from target to target, + * its definition is in the .dts + */ + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* + * LDO38 differs from target to target, + * its definition is in the .dts + */ + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 + &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&mshc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; +}; + +&ppmu_d0_general { + status = "okay"; + events { + ppmu_event0_d0_general: ppmu-event0-d0-general { + event-name = "ppmu-event0-d0-general"; + }; + }; +}; + +&ppmu_d1_general { + status = "okay"; + events { + ppmu_event0_d1_general: ppmu-event0-d1-general { + event-name = "ppmu-event0-d1-general"; + }; + }; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(INPUT, gpa0-0, DOWN, FAST_SR1); + PIN(INPUT, gpa0-1, NONE, FAST_SR1); + PIN(INPUT, gpa0-2, DOWN, FAST_SR1); + PIN(INPUT, gpa0-3, NONE, FAST_SR1); + PIN(INPUT, gpa0-4, NONE, FAST_SR1); + PIN(INPUT, gpa0-5, DOWN, FAST_SR1); + PIN(INPUT, gpa0-6, NONE, FAST_SR1); + PIN(INPUT, gpa0-7, NONE, FAST_SR1); + + PIN(INPUT, gpa1-0, UP, FAST_SR1); + PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-2, NONE, FAST_SR1); + PIN(INPUT, gpa1-3, DOWN, FAST_SR1); + PIN(INPUT, gpa1-4, DOWN, FAST_SR1); + PIN(INPUT, gpa1-5, NONE, FAST_SR1); + PIN(INPUT, gpa1-6, NONE, FAST_SR1); + PIN(INPUT, gpa1-7, NONE, FAST_SR1); + + PIN(INPUT, gpa2-0, NONE, FAST_SR1); + PIN(INPUT, gpa2-1, NONE, FAST_SR1); + PIN(INPUT, gpa2-2, NONE, FAST_SR1); + PIN(INPUT, gpa2-3, DOWN, FAST_SR1); + PIN(INPUT, gpa2-4, NONE, FAST_SR1); + PIN(INPUT, gpa2-5, DOWN, FAST_SR1); + PIN(INPUT, gpa2-6, DOWN, FAST_SR1); + PIN(INPUT, gpa2-7, NONE, FAST_SR1); + + PIN(INPUT, gpa3-0, DOWN, FAST_SR1); + PIN(INPUT, gpa3-1, DOWN, FAST_SR1); + PIN(INPUT, gpa3-2, NONE, FAST_SR1); + PIN(INPUT, gpa3-3, DOWN, FAST_SR1); + PIN(INPUT, gpa3-4, NONE, FAST_SR1); + PIN(INPUT, gpa3-5, DOWN, FAST_SR1); + PIN(INPUT, gpa3-6, DOWN, FAST_SR1); + PIN(INPUT, gpa3-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf1-0, NONE, FAST_SR1); + PIN(INPUT, gpf1-1, NONE, FAST_SR1); + PIN(INPUT, gpf1-2, DOWN, FAST_SR1); + PIN(INPUT, gpf1-4, UP, FAST_SR1); + PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); + PIN(INPUT, gpf1-6, DOWN, FAST_SR1); + PIN(INPUT, gpf1-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf2-0, DOWN, FAST_SR1); + PIN(INPUT, gpf2-1, DOWN, FAST_SR1); + PIN(INPUT, gpf2-2, DOWN, FAST_SR1); + PIN(INPUT, gpf2-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf3-0, DOWN, FAST_SR1); + PIN(INPUT, gpf3-1, DOWN, FAST_SR1); + PIN(INPUT, gpf3-2, NONE, FAST_SR1); + PIN(INPUT, gpf3-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf4-0, DOWN, FAST_SR1); + PIN(INPUT, gpf4-1, DOWN, FAST_SR1); + PIN(INPUT, gpf4-2, DOWN, FAST_SR1); + PIN(INPUT, gpf4-3, DOWN, FAST_SR1); + PIN(INPUT, gpf4-4, DOWN, FAST_SR1); + PIN(INPUT, gpf4-5, DOWN, FAST_SR1); + PIN(INPUT, gpf4-6, DOWN, FAST_SR1); + PIN(INPUT, gpf4-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf5-0, DOWN, FAST_SR1); + PIN(INPUT, gpf5-1, DOWN, FAST_SR1); + PIN(INPUT, gpf5-2, DOWN, FAST_SR1); + PIN(INPUT, gpf5-3, DOWN, FAST_SR1); + PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); + PIN(INPUT, gpf5-5, DOWN, FAST_SR1); + PIN(INPUT, gpf5-6, DOWN, FAST_SR1); + PIN(INPUT, gpf5-7, DOWN, FAST_SR1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(INPUT, gpv6-0, DOWN, FAST_SR1); + PIN(INPUT, gpv6-1, DOWN, FAST_SR1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(INPUT, gpj2-0, DOWN, FAST_SR1); + PIN(INPUT, gpj2-1, DOWN, FAST_SR1); + PIN(INPUT, gpj2-2, DOWN, FAST_SR1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(INPUT, gpr3-0, NONE, FAST_SR1); + PIN(INPUT, gpr3-1, DOWN, FAST_SR1); + PIN(INPUT, gpr3-2, DOWN, FAST_SR1); + PIN(INPUT, gpr3-3, DOWN, FAST_SR1); + PIN(INPUT, gpr3-7, NONE, FAST_SR1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(INPUT, gpf0-0, UP, FAST_SR1); + PIN(INPUT, gpf0-1, UP, FAST_SR1); + PIN(INPUT, gpf0-2, DOWN, FAST_SR1); + PIN(INPUT, gpf0-3, UP, FAST_SR1); + PIN(INPUT, gpf0-4, DOWN, FAST_SR1); + PIN(INPUT, gpf0-5, NONE, FAST_SR1); + PIN(INPUT, gpf0-6, DOWN, FAST_SR1); + PIN(INPUT, gpf0-7, UP, FAST_SR1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(INPUT, gpj0-2, DOWN, FAST_SR1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(INPUT, gpv7-0, DOWN, FAST_SR1); + PIN(INPUT, gpv7-1, DOWN, FAST_SR1); + PIN(INPUT, gpv7-2, NONE, FAST_SR1); + PIN(INPUT, gpv7-3, DOWN, FAST_SR1); + PIN(INPUT, gpv7-4, DOWN, FAST_SR1); + PIN(INPUT, gpv7-5, DOWN, FAST_SR1); + + PIN(INPUT, gpb0-4, DOWN, FAST_SR1); + + PIN(INPUT, gpc0-2, DOWN, FAST_SR1); + PIN(INPUT, gpc0-5, DOWN, FAST_SR1); + PIN(INPUT, gpc0-7, DOWN, FAST_SR1); + + PIN(INPUT, gpc1-1, DOWN, FAST_SR1); + + PIN(INPUT, gpc3-4, NONE, FAST_SR1); + PIN(INPUT, gpc3-5, NONE, FAST_SR1); + PIN(INPUT, gpc3-6, NONE, FAST_SR1); + PIN(INPUT, gpc3-7, NONE, FAST_SR1); + + PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); + PIN(2, gpg0-1, DOWN, FAST_SR1); + + PIN(INPUT, gpd2-5, DOWN, FAST_SR1); + + PIN(INPUT, gpd4-0, NONE, FAST_SR1); + PIN(INPUT, gpd4-1, DOWN, FAST_SR1); + PIN(INPUT, gpd4-2, DOWN, FAST_SR1); + PIN(INPUT, gpd4-3, DOWN, FAST_SR1); + PIN(INPUT, gpd4-4, DOWN, FAST_SR1); + + PIN(INPUT, gpd6-3, DOWN, FAST_SR1); + + PIN(INPUT, gpd8-1, UP, FAST_SR1); + + PIN(INPUT, gpg1-0, DOWN, FAST_SR1); + PIN(INPUT, gpg1-1, DOWN, FAST_SR1); + PIN(INPUT, gpg1-2, DOWN, FAST_SR1); + PIN(INPUT, gpg1-3, DOWN, FAST_SR1); + PIN(INPUT, gpg1-4, DOWN, FAST_SR1); + + PIN(INPUT, gpg2-0, DOWN, FAST_SR1); + PIN(INPUT, gpg2-1, DOWN, FAST_SR1); + + PIN(INPUT, gpg3-0, DOWN, FAST_SR1); + PIN(INPUT, gpg3-1, DOWN, FAST_SR1); + PIN(INPUT, gpg3-5, DOWN, FAST_SR1); + PIN(INPUT, gpg3-7, DOWN, FAST_SR1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(INPUT, gpj1-2, DOWN, FAST_SR1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&xxti>; +}; + +&serial_1 { + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x1>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + +&timer { + clock-frequency = <24000000>; +}; + +&tmu_atlas0 { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_apollo { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_g3d { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&usbdrd30 { + vdd33-supply = <&ldo10_reg>; + vdd10-supply = <&ldo6_reg>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd30_phy { + vbus-supply = <&safeout1_reg>; + status = "okay"; +}; + +&xxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts dissimilarity index 98% index e8971f4..d30b45a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,1120 +1,33 @@ -/* - * SAMSUNG Exynos5433 TM2 board device tree source - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * - * Device tree source file for Samsung's TM2 board which is based on - * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/dts-v1/; -#include "exynos5433.dtsi" -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Samsung TM2 board"; - compatible = "samsung,tm2", "samsung,exynos5433"; - - aliases { - gsc0 = &gsc_0; - gsc1 = &gsc_1; - gsc2 = &gsc_2; - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_aud; - pinctrl2 = &pinctrl_cpif; - pinctrl3 = &pinctrl_ese; - pinctrl4 = &pinctrl_finger; - pinctrl5 = &pinctrl_fsys; - pinctrl6 = &pinctrl_imem; - pinctrl7 = &pinctrl_nfc; - pinctrl8 = &pinctrl_peric; - pinctrl9 = &pinctrl_touch; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - serial3 = &serial_3; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - spi3 = &spi_3; - spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@20000000 { - device_type = "memory"; - reg = <0x0 0x20000000 0x0 0xc0000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - }; - - volume-up-key { - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - label = "volume-up key"; - debounce-interval = <10>; - }; - - volume-down-key { - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - label = "volume-down key"; - debounce-interval = <10>; - }; - - homepage-key { - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "homepage key"; - debounce-interval = <10>; - }; - }; - - i2c_max98504: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max98504: max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; - }; - }; - - sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; - model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; - status = "okay"; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - - thermistor-ap { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 1>; - #thermal-sensor-cells = <0>; - }; - - thermistor-charger { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 2>; - }; -}; - -&bus_g2d_400 { - devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; - vdd-supply = <&buck4_reg>; - exynos,saturation-ratio = <10>; - status = "okay"; -}; - -&bus_g2d_266 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_gscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_hevc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc0 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc1 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc2 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; -}; - -&cmu_fsys { - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, - <&cmu_top CLK_DIV_SCLK_USBDRD30>, - <&cmu_top CLK_DIV_SCLK_USBHOST30>; - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, - <66700000>, <66700000>; -}; - -&cmu_gscl { - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; -}; - -&cmu_mfc { - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; -}; - -&cmu_mscl { - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>; -}; - -&cpu0 { - cpu-supply = <&buck3_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - -&decon { - status = "okay"; - - i80-if-timings { - }; -}; - -&dsi { - status = "okay"; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; -}; - -&hsi2c_0 { - status = "okay"; - clock-frequency = <2500000>; - - s2mps13-pmic@66 { - compatible = "samsung,s2mps13-pmic"; - interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x66>; - samsung,s2mps11-wrstbi-ground; - - s2mps13_osc: clocks { - compatible = "samsung,s2mps13-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps13_ap", "s2mps13_cp", - "s2mps13_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_0.9V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD1_E_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD10_DPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MIPI2L_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD18_MIPI2L_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD18_LLI_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD33_USB30_3.0V_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_INT_M_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_KFC_M_1.1V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDD_G3D_M_0.95V_AP"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDDQ_EFUSE"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <3400000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_TFLASH_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "V_CODEC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VDDA_1.8V_COMP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_IO_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.05V_AP"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "VT_CAM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "UNUSED_LDO25"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-off; - }; - - ldo26_reg: LDO26 { - regulator-name = "CAM_AF_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "VCC_3.0V_LCD_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "VCC_1.8V_LCD_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "VT_CAM_2.8V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo30_reg: LDO30 { - regulator-name = "TSP_AVDD_3.3V_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "VTOUCH_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "VTOUCH_LED_3.3V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - }; - - ldo34_reg: LDO34 { - regulator-name = "VCC_1.8V_MHL_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2100000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "OIS_VM_2.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo36_reg: LDO36 { - regulator-name = "VSIL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo37_reg: LDO37 { - regulator-name = "VF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo39_reg: LDO39 { - regulator-name = "V_HRM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo40_reg: LDO40 { - regulator-name = "V_HRM_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_EGL_1.0V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_KFC_1.0V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_INT_0.95V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck6_reg: BUCK6 { - regulator-name = "VDD_G3D_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_MEM1_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VDD_LLDO_1.35V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_MLDO_2.0V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_mem2"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - }; - }; -}; - -&hsi2c_8 { - status = "okay"; - - max77843@66 { - compatible = "maxim,max77843"; - interrupt-parent = <&gpa1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - muic: max77843-muic { - compatible = "maxim,max77843-muic"; - }; - - regulators { - compatible = "maxim,max77843-regulator"; - safeout1_reg: SAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - safeout2_reg: SAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <100000>; - regulator-max-microamp = <3150000>; - }; - }; - - haptic: max77843-haptic { - compatible = "maxim,max77843-haptic"; - haptic-supply = <&ldo38_reg>; - pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mshc_0 { - status = "okay"; - num-slots = <1>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 3>; - samsung,read-strobe-delay = <90>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 - &sd0_bus8 &sd0_rdqs>; - bus-width = <8>; - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; - assigned-clock-rates = <800000000>; -}; - -&mshc_2 { - status = "okay"; - num-slots = <1>; - cap-sd-highspeed; - disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; -}; - -&ppmu_d0_general { - status = "okay"; - events { - ppmu_event0_d0_general: ppmu-event0-d0-general { - event-name = "ppmu-event0-d0-general"; - }; - }; -}; - -&ppmu_d1_general { - status = "okay"; - events { - ppmu_event0_d1_general: ppmu-event0-d1-general { - event-name = "ppmu-event0-d1-general"; - }; - }; -}; - -&pinctrl_alive { - pinctrl-names = "default"; - pinctrl-0 = <&initial_alive>; - - initial_alive: initial-state { - PIN(INPUT, gpa0-0, DOWN, FAST_SR1); - PIN(INPUT, gpa0-1, NONE, FAST_SR1); - PIN(INPUT, gpa0-2, DOWN, FAST_SR1); - PIN(INPUT, gpa0-3, NONE, FAST_SR1); - PIN(INPUT, gpa0-4, NONE, FAST_SR1); - PIN(INPUT, gpa0-5, DOWN, FAST_SR1); - PIN(INPUT, gpa0-6, NONE, FAST_SR1); - PIN(INPUT, gpa0-7, NONE, FAST_SR1); - - PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); - PIN(INPUT, gpa1-2, NONE, FAST_SR1); - PIN(INPUT, gpa1-3, DOWN, FAST_SR1); - PIN(INPUT, gpa1-4, DOWN, FAST_SR1); - PIN(INPUT, gpa1-5, NONE, FAST_SR1); - PIN(INPUT, gpa1-6, NONE, FAST_SR1); - PIN(INPUT, gpa1-7, NONE, FAST_SR1); - - PIN(INPUT, gpa2-0, NONE, FAST_SR1); - PIN(INPUT, gpa2-1, NONE, FAST_SR1); - PIN(INPUT, gpa2-2, NONE, FAST_SR1); - PIN(INPUT, gpa2-3, DOWN, FAST_SR1); - PIN(INPUT, gpa2-4, NONE, FAST_SR1); - PIN(INPUT, gpa2-5, DOWN, FAST_SR1); - PIN(INPUT, gpa2-6, DOWN, FAST_SR1); - PIN(INPUT, gpa2-7, NONE, FAST_SR1); - - PIN(INPUT, gpa3-0, DOWN, FAST_SR1); - PIN(INPUT, gpa3-1, DOWN, FAST_SR1); - PIN(INPUT, gpa3-2, NONE, FAST_SR1); - PIN(INPUT, gpa3-3, DOWN, FAST_SR1); - PIN(INPUT, gpa3-4, NONE, FAST_SR1); - PIN(INPUT, gpa3-5, DOWN, FAST_SR1); - PIN(INPUT, gpa3-6, DOWN, FAST_SR1); - PIN(INPUT, gpa3-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf1-0, NONE, FAST_SR1); - PIN(INPUT, gpf1-1, NONE, FAST_SR1); - PIN(INPUT, gpf1-2, DOWN, FAST_SR1); - PIN(INPUT, gpf1-4, UP, FAST_SR1); - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); - PIN(INPUT, gpf1-6, DOWN, FAST_SR1); - PIN(INPUT, gpf1-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf2-0, DOWN, FAST_SR1); - PIN(INPUT, gpf2-1, DOWN, FAST_SR1); - PIN(INPUT, gpf2-2, DOWN, FAST_SR1); - PIN(INPUT, gpf2-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf3-0, DOWN, FAST_SR1); - PIN(INPUT, gpf3-1, DOWN, FAST_SR1); - PIN(INPUT, gpf3-2, NONE, FAST_SR1); - PIN(INPUT, gpf3-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf4-0, DOWN, FAST_SR1); - PIN(INPUT, gpf4-1, DOWN, FAST_SR1); - PIN(INPUT, gpf4-2, DOWN, FAST_SR1); - PIN(INPUT, gpf4-3, DOWN, FAST_SR1); - PIN(INPUT, gpf4-4, DOWN, FAST_SR1); - PIN(INPUT, gpf4-5, DOWN, FAST_SR1); - PIN(INPUT, gpf4-6, DOWN, FAST_SR1); - PIN(INPUT, gpf4-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf5-0, DOWN, FAST_SR1); - PIN(INPUT, gpf5-1, DOWN, FAST_SR1); - PIN(INPUT, gpf5-2, DOWN, FAST_SR1); - PIN(INPUT, gpf5-3, DOWN, FAST_SR1); - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); - PIN(INPUT, gpf5-5, DOWN, FAST_SR1); - PIN(INPUT, gpf5-6, DOWN, FAST_SR1); - PIN(INPUT, gpf5-7, DOWN, FAST_SR1); - }; - - te_irq: te_irq { - samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; - }; -}; - -&pinctrl_cpif { - pinctrl-names = "default"; - pinctrl-0 = <&initial_cpif>; - - initial_cpif: initial-state { - PIN(INPUT, gpv6-0, DOWN, FAST_SR1); - PIN(INPUT, gpv6-1, DOWN, FAST_SR1); - }; -}; - -&pinctrl_ese { - pinctrl-names = "default"; - pinctrl-0 = <&initial_ese>; - - initial_ese: initial-state { - PIN(INPUT, gpj2-0, DOWN, FAST_SR1); - PIN(INPUT, gpj2-1, DOWN, FAST_SR1); - PIN(INPUT, gpj2-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_fsys { - pinctrl-names = "default"; - pinctrl-0 = <&initial_fsys>; - - initial_fsys: initial-state { - PIN(INPUT, gpr3-0, NONE, FAST_SR1); - PIN(INPUT, gpr3-1, DOWN, FAST_SR1); - PIN(INPUT, gpr3-2, DOWN, FAST_SR1); - PIN(INPUT, gpr3-3, DOWN, FAST_SR1); - PIN(INPUT, gpr3-7, NONE, FAST_SR1); - }; -}; - -&pinctrl_imem { - pinctrl-names = "default"; - pinctrl-0 = <&initial_imem>; - - initial_imem: initial-state { - PIN(INPUT, gpf0-0, UP, FAST_SR1); - PIN(INPUT, gpf0-1, UP, FAST_SR1); - PIN(INPUT, gpf0-2, DOWN, FAST_SR1); - PIN(INPUT, gpf0-3, UP, FAST_SR1); - PIN(INPUT, gpf0-4, DOWN, FAST_SR1); - PIN(INPUT, gpf0-5, NONE, FAST_SR1); - PIN(INPUT, gpf0-6, DOWN, FAST_SR1); - PIN(INPUT, gpf0-7, UP, FAST_SR1); - }; -}; - -&pinctrl_nfc { - pinctrl-names = "default"; - pinctrl-0 = <&initial_nfc>; - - initial_nfc: initial-state { - PIN(INPUT, gpj0-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_peric { - pinctrl-names = "default"; - pinctrl-0 = <&initial_peric>; - - initial_peric: initial-state { - PIN(INPUT, gpv7-0, DOWN, FAST_SR1); - PIN(INPUT, gpv7-1, DOWN, FAST_SR1); - PIN(INPUT, gpv7-2, NONE, FAST_SR1); - PIN(INPUT, gpv7-3, DOWN, FAST_SR1); - PIN(INPUT, gpv7-4, DOWN, FAST_SR1); - PIN(INPUT, gpv7-5, DOWN, FAST_SR1); - - PIN(INPUT, gpb0-4, DOWN, FAST_SR1); - - PIN(INPUT, gpc0-2, DOWN, FAST_SR1); - PIN(INPUT, gpc0-5, DOWN, FAST_SR1); - PIN(INPUT, gpc0-7, DOWN, FAST_SR1); - - PIN(INPUT, gpc1-1, DOWN, FAST_SR1); - - PIN(INPUT, gpc3-4, NONE, FAST_SR1); - PIN(INPUT, gpc3-5, NONE, FAST_SR1); - PIN(INPUT, gpc3-6, NONE, FAST_SR1); - PIN(INPUT, gpc3-7, NONE, FAST_SR1); - - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); - PIN(2, gpg0-1, DOWN, FAST_SR1); - - PIN(INPUT, gpd2-5, DOWN, FAST_SR1); - - PIN(INPUT, gpd4-0, NONE, FAST_SR1); - PIN(INPUT, gpd4-1, DOWN, FAST_SR1); - PIN(INPUT, gpd4-2, DOWN, FAST_SR1); - PIN(INPUT, gpd4-3, DOWN, FAST_SR1); - PIN(INPUT, gpd4-4, DOWN, FAST_SR1); - - PIN(INPUT, gpd6-3, DOWN, FAST_SR1); - - PIN(INPUT, gpd8-1, UP, FAST_SR1); - - PIN(INPUT, gpg1-0, DOWN, FAST_SR1); - PIN(INPUT, gpg1-1, DOWN, FAST_SR1); - PIN(INPUT, gpg1-2, DOWN, FAST_SR1); - PIN(INPUT, gpg1-3, DOWN, FAST_SR1); - PIN(INPUT, gpg1-4, DOWN, FAST_SR1); - - PIN(INPUT, gpg2-0, DOWN, FAST_SR1); - PIN(INPUT, gpg2-1, DOWN, FAST_SR1); - - PIN(INPUT, gpg3-0, DOWN, FAST_SR1); - PIN(INPUT, gpg3-1, DOWN, FAST_SR1); - PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); - }; -}; - -&pinctrl_touch { - pinctrl-names = "default"; - pinctrl-0 = <&initial_touch>; - - initial_touch: initial-state { - PIN(INPUT, gpj1-2, DOWN, FAST_SR1); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mic { - status = "okay"; - - i80-if-timings { - }; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&xxti>; -}; - -&serial_1 { - status = "okay"; -}; - -&spi_1 { - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - - wm5110: wm5110-codec@0 { - compatible = "wlf,wm5110"; - reg = <0x0>; - spi-max-frequency = <20000000>; - interrupt-parent = <&gpa0>; - interrupts = <4 IRQ_TYPE_NONE>; - clocks = <&pmu_system_controller 0>, - <&s2mps13_osc S2MPS11_CLK_BT>; - clock-names = "mclk1", "mclk2"; - - gpio-controller; - #gpio-cells = <2>; - - wlf,micd-detect-debounce = <300>; - wlf,micd-bias-start-time = <0x1>; - wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; - wlf,micd-force-micbias; - wlf,micd-configs = <0x0 1 0>; - wlf,hpdet-channel = <1>; - wlf,gpsw = <0x1>; - wlf,inmode = <2 0 2 0>; - - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; - - /* core supplies */ - AVDD-supply = <&ldo18_reg>; - DBVDD1-supply = <&ldo18_reg>; - CPVDD-supply = <&ldo18_reg>; - DBVDD2-supply = <&ldo18_reg>; - DBVDD3-supply = <&ldo18_reg>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - }; -}; - -&timer { - clock-frequency = <24000000>; -}; - -&tmu_atlas0 { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_apollo { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_g3d { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&usbdrd30 { - vdd33-supply = <&ldo10_reg>; - vdd10-supply = <&ldo6_reg>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd30_phy { - vbus-supply = <&safeout1_reg>; - status = "okay"; -}; - -&xxti { - clock-frequency = <24000000>; -}; +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5433-tm2-common.dtsi" + +/ { + model = "Samsung TM2E board"; + compatible = "samsung,tm2e", "samsung,exynos5433"; +}; + +®ulators { + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 854c583..53e361f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -11,21 +11,23 @@ * published by the Free Software Foundation. */ -#include "exynos5433-tm2.dts" +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2E board"; compatible = "samsung,tm2e", "samsung,exynos5433"; }; -&ldo31_reg { - regulator-name = "TSP_VDD_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; +®ulators { + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; -&ldo38_reg { - regulator-name = "VCC_3.3V_MOTOR_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + ldo38_reg: LDO38 { + regulator-name = "VCC_3.3V_MOTOR_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other 2017-01-06 3:59 ` [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Jaechul Lee @ 2017-01-06 7:09 ` Krzysztof Kozlowski 2017-01-06 7:59 ` Andi Shyti 0 siblings, 1 reply; 15+ messages in thread From: Krzysztof Kozlowski @ 2017-01-06 7:09 UTC (permalink / raw) To: Jaechul Lee Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On Fri, Jan 06, 2017 at 12:59:06PM +0900, Jaechul Lee wrote: > From: Andi Shyti <andi.shyti@samsung.com> > > Currently tm2e dts includes tm2 but there are some differences > between the two boards and tm2 has some properties that tm2e > doesn't have. > > That's why it's important to keep the two dts files independent > and put all the commonalities in a tm2-common.dtsi file. > > At the current status the only two differences between the two > dts files (besides the board name) are ldo31 and ldo38. > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > --- > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 +++++++++++++++++++ > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- Like talking to a wall. Without any feedback. If my instructions were wrong (and it is not possible to detect rename) then please say it (you can add personal comments after separator ---). As of now because it is third time without any explanation: NACK. Best regards, Krzysztof > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +- > 3 files changed, 1163 insertions(+), 1130 deletions(-) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > new file mode 100644 > index 0000000..c43f9a3 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > @@ -0,0 +1,1118 @@ > +/* > + * SAMSUNG Exynos5433 TM2 board device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Common device tree source file for Samsung's TM2 and TM2E boards > + * which are based on Samsung Exynos5433 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > +#include "exynos5433.dtsi" > +#include <dt-bindings/clock/samsung,s2mps11.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + model = "Samsung TM2 board"; > + compatible = "samsung,tm2", "samsung,exynos5433"; > + > + aliases { > + gsc0 = &gsc_0; > + gsc1 = &gsc_1; > + gsc2 = &gsc_2; > + pinctrl0 = &pinctrl_alive; > + pinctrl1 = &pinctrl_aud; > + pinctrl2 = &pinctrl_cpif; > + pinctrl3 = &pinctrl_ese; > + pinctrl4 = &pinctrl_finger; > + pinctrl5 = &pinctrl_fsys; > + pinctrl6 = &pinctrl_imem; > + pinctrl7 = &pinctrl_nfc; > + pinctrl8 = &pinctrl_peric; > + pinctrl9 = &pinctrl_touch; > + serial0 = &serial_0; > + serial1 = &serial_1; > + serial2 = &serial_2; > + serial3 = &serial_3; > + spi0 = &spi_0; > + spi1 = &spi_1; > + spi2 = &spi_2; > + spi3 = &spi_3; > + spi4 = &spi_4; > + mshc0 = &mshc_0; > + mshc2 = &mshc_2; > + }; > + > + chosen { > + stdout-path = &serial_1; > + }; > + > + memory@20000000 { > + device_type = "memory"; > + reg = <0x0 0x20000000 0x0 0xc0000000>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + power-key { > + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_POWER>; > + label = "power key"; > + debounce-interval = <10>; > + }; > + > + volume-up-key { > + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + label = "volume-up key"; > + debounce-interval = <10>; > + }; > + > + volume-down-key { > + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + label = "volume-down key"; > + debounce-interval = <10>; > + }; > + > + homepage-key { > + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_MENU>; > + label = "homepage key"; > + debounce-interval = <10>; > + }; > + }; > + > + i2c_max98504: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ > + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + max98504: max98504@31 { > + compatible = "maxim,max98504"; > + reg = <0x31>; > + maxim,rx-path = <1>; > + maxim,tx-path = <1>; > + maxim,tx-channel-mask = <3>; > + maxim,tx-channel-source = <2>; > + }; > + }; > + > + sound { > + compatible = "samsung,tm2-audio"; > + audio-codec = <&wm5110>; > + i2s-controller = <&i2s0>; > + audio-amplifier = <&max98504>; > + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; > + model = "wm5110"; > + samsung,audio-routing = > + /* Headphone */ > + "HP", "HPOUT1L", > + "HP", "HPOUT1R", > + > + /* Speaker */ > + "SPK", "SPKOUT", > + "SPKOUT", "HPOUT2L", > + "SPKOUT", "HPOUT2R", > + > + /* Receiver */ > + "RCV", "HPOUT3L", > + "RCV", "HPOUT3R"; > + status = "okay"; > + }; > +}; > + > +&adc { > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > + > + thermistor-ap { > + compatible = "murata,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 0>; > + }; > + > + thermistor-battery { > + compatible = "murata,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 1>; > + #thermal-sensor-cells = <0>; > + }; > + > + thermistor-charger { > + compatible = "murata,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 2>; > + }; > +}; > + > +&bus_g2d_400 { > + devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; > + vdd-supply = <&buck4_reg>; > + exynos,saturation-ratio = <10>; > + status = "okay"; > +}; > + > +&bus_g2d_266 { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_gscl { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_hevc { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_jpeg { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_mfc { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_mscl { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_noc0 { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_noc1 { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&bus_noc2 { > + devfreq = <&bus_g2d_400>; > + status = "okay"; > +}; > + > +&cmu_aud { > + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; > + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; > +}; > + > +&cmu_fsys { > + assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, > + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, > + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, > + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, > + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, > + <&cmu_top CLK_DIV_SCLK_USBDRD30>, > + <&cmu_top CLK_DIV_SCLK_USBHOST30>; > + assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>, > + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, > + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, > + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; > + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, > + <66700000>, <66700000>; > +}; > + > +&cmu_gscl { > + assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, > + <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; > + assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, > + <&cmu_top CLK_ACLK_GSCL_333>; > +}; > + > +&cmu_mfc { > + assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; > + assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; > +}; > + > +&cmu_mscl { > + assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, > + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, > + <&cmu_mscl CLK_MOUT_SCLK_JPEG>, > + <&cmu_top CLK_MOUT_SCLK_JPEG_A>; > + assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, > + <&cmu_top CLK_SCLK_JPEG_MSCL>, > + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, > + <&cmu_top CLK_MOUT_BUS_PLL_USER>; > +}; > + > +&cpu0 { > + cpu-supply = <&buck3_reg>; > +}; > + > +&cpu4 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&decon { > + status = "okay"; > + > + i80-if-timings { > + }; > +}; > + > +&dsi { > + status = "okay"; > + vddcore-supply = <&ldo6_reg>; > + vddio-supply = <&ldo7_reg>; > + samsung,pll-clock-frequency = <24000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&te_irq>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + > + dsi_out: endpoint { > + samsung,burst-clock-frequency = <512000000>; > + samsung,esc-clock-frequency = <16000000>; > + }; > + }; > + }; > +}; > + > +&hsi2c_0 { > + status = "okay"; > + clock-frequency = <2500000>; > + > + s2mps13-pmic@66 { > + compatible = "samsung,s2mps13-pmic"; > + interrupt-parent = <&gpa0>; > + interrupts = <7 IRQ_TYPE_NONE>; > + reg = <0x66>; > + samsung,s2mps11-wrstbi-ground; > + > + s2mps13_osc: clocks { > + compatible = "samsung,s2mps13-clk"; > + #clock-cells = <1>; > + clock-output-names = "s2mps13_ap", "s2mps13_cp", > + "s2mps13_bt"; > + }; > + > + regulators: regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ALIVE_0.9V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDDQ_MMC2_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VDD1_E_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VDD10_DPLL_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VDD10_MIPI2L_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD18_MIPI2L_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VDD18_LLI_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD33_USB30_3.0V_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_INT_M_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "VDD_KFC_M_1.1V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "VDD_G3D_M_0.95V_AP"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "VDDQ_EFUSE"; > + regulator-min-microvolt = <1400000>; > + regulator-max-microvolt = <3400000>; > + regulator-always-on; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "V_TFLASH_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "V_CODEC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "VDDA_1.8V_COMP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "VCC_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VT_CAM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "CAM_IO_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "CAM_SEN_CORE_1.05V_AP"; > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "VT_CAM_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo25_reg: LDO25 { > + regulator-name = "UNUSED_LDO25"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-off; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "CAM_AF_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo27_reg: LDO27 { > + regulator-name = "VCC_3.0V_LCD_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo28_reg: LDO28 { > + regulator-name = "VCC_1.8V_LCD_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo29_reg: LDO29 { > + regulator-name = "VT_CAM_2.8V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo30_reg: LDO30 { > + regulator-name = "TSP_AVDD_3.3V_AP"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + /* > + * LDO31 differs from target to target, > + * its definition is in the .dts > + */ > + > + ldo32_reg: LDO32 { > + regulator-name = "VTOUCH_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo33_reg: LDO33 { > + regulator-name = "VTOUCH_LED_3.3V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + }; > + > + ldo34_reg: LDO34 { > + regulator-name = "VCC_1.8V_MHL_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <2100000>; > + }; > + > + ldo35_reg: LDO35 { > + regulator-name = "OIS_VM_2.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo36_reg: LDO36 { > + regulator-name = "VSIL_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo37_reg: LDO37 { > + regulator-name = "VF_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + /* > + * LDO38 differs from target to target, > + * its definition is in the .dts > + */ > + > + ldo39_reg: LDO39 { > + regulator-name = "V_HRM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo40_reg: LDO40 { > + regulator-name = "V_HRM_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VDD_MIF_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VDD_EGL_1.0V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_KFC_1.0V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "VDD_INT_0.95V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "VDD_G3D_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VDD_MEM1_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "VDD_LLDO_1.35V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "VDD_MLDO_2.0V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck10_reg: BUCK10 { > + regulator-name = "vdd_mem2"; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&hsi2c_8 { > + status = "okay"; > + > + max77843@66 { > + compatible = "maxim,max77843"; > + interrupt-parent = <&gpa1>; > + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; > + reg = <0x66>; > + > + muic: max77843-muic { > + compatible = "maxim,max77843-muic"; > + }; > + > + regulators { > + compatible = "maxim,max77843-regulator"; > + safeout1_reg: SAFEOUT1 { > + regulator-name = "SAFEOUT1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + > + safeout2_reg: SAFEOUT2 { > + regulator-name = "SAFEOUT2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + > + charger_reg: CHARGER { > + regulator-name = "CHARGER"; > + regulator-min-microamp = <100000>; > + regulator-max-microamp = <3150000>; > + }; > + }; > + > + haptic: max77843-haptic { > + compatible = "maxim,max77843-haptic"; > + haptic-supply = <&ldo38_reg>; > + pwms = <&pwm 0 33670 0>; > + pwm-names = "haptic"; > + }; > + }; > +}; > + > +&i2s0 { > + status = "okay"; > +}; > + > +&mshc_0 { > + status = "okay"; > + num-slots = <1>; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-highspeed; > + non-removable; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; > + samsung,dw-mshc-hs400-timing = <0 3>; > + samsung,read-strobe-delay = <90>; > + fifo-depth = <0x80>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 > + &sd0_bus8 &sd0_rdqs>; > + bus-width = <8>; > + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; > + assigned-clock-rates = <800000000>; > +}; > + > +&mshc_2 { > + status = "okay"; > + num-slots = <1>; > + cap-sd-highspeed; > + disable-wp; > + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; > + fifo-depth = <0x80>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; > + bus-width = <4>; > +}; > + > +&ppmu_d0_general { > + status = "okay"; > + events { > + ppmu_event0_d0_general: ppmu-event0-d0-general { > + event-name = "ppmu-event0-d0-general"; > + }; > + }; > +}; > + > +&ppmu_d1_general { > + status = "okay"; > + events { > + ppmu_event0_d1_general: ppmu-event0-d1-general { > + event-name = "ppmu-event0-d1-general"; > + }; > + }; > +}; > + > +&pinctrl_alive { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_alive>; > + > + initial_alive: initial-state { > + PIN(INPUT, gpa0-0, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-1, NONE, FAST_SR1); > + PIN(INPUT, gpa0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-3, NONE, FAST_SR1); > + PIN(INPUT, gpa0-4, NONE, FAST_SR1); > + PIN(INPUT, gpa0-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa0-6, NONE, FAST_SR1); > + PIN(INPUT, gpa0-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa1-0, UP, FAST_SR1); > + PIN(INPUT, gpa1-1, NONE, FAST_SR1); > + PIN(INPUT, gpa1-2, NONE, FAST_SR1); > + PIN(INPUT, gpa1-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa1-4, DOWN, FAST_SR1); > + PIN(INPUT, gpa1-5, NONE, FAST_SR1); > + PIN(INPUT, gpa1-6, NONE, FAST_SR1); > + PIN(INPUT, gpa1-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa2-0, NONE, FAST_SR1); > + PIN(INPUT, gpa2-1, NONE, FAST_SR1); > + PIN(INPUT, gpa2-2, NONE, FAST_SR1); > + PIN(INPUT, gpa2-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-4, NONE, FAST_SR1); > + PIN(INPUT, gpa2-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-6, DOWN, FAST_SR1); > + PIN(INPUT, gpa2-7, NONE, FAST_SR1); > + > + PIN(INPUT, gpa3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-2, NONE, FAST_SR1); > + PIN(INPUT, gpa3-3, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-4, NONE, FAST_SR1); > + PIN(INPUT, gpa3-5, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-6, DOWN, FAST_SR1); > + PIN(INPUT, gpa3-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf1-0, NONE, FAST_SR1); > + PIN(INPUT, gpf1-1, NONE, FAST_SR1); > + PIN(INPUT, gpf1-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf1-4, UP, FAST_SR1); > + PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); > + PIN(INPUT, gpf1-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf1-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf2-3, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf3-2, NONE, FAST_SR1); > + PIN(INPUT, gpf3-3, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf4-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-3, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-4, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-5, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf4-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpf5-0, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-1, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-3, DOWN, FAST_SR1); > + PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); > + PIN(INPUT, gpf5-5, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf5-7, DOWN, FAST_SR1); > + }; > + > + te_irq: te_irq { > + samsung,pins = "gpf1-3"; > + samsung,pin-function = <0xf>; > + }; > +}; > + > +&pinctrl_cpif { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_cpif>; > + > + initial_cpif: initial-state { > + PIN(INPUT, gpv6-0, DOWN, FAST_SR1); > + PIN(INPUT, gpv6-1, DOWN, FAST_SR1); > + }; > +}; > + > +&pinctrl_ese { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_ese>; > + > + initial_ese: initial-state { > + PIN(INPUT, gpj2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpj2-1, DOWN, FAST_SR1); > + PIN(INPUT, gpj2-2, DOWN, FAST_SR1); > + }; > +}; > + > +&pinctrl_fsys { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_fsys>; > + > + initial_fsys: initial-state { > + PIN(INPUT, gpr3-0, NONE, FAST_SR1); > + PIN(INPUT, gpr3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-2, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-3, DOWN, FAST_SR1); > + PIN(INPUT, gpr3-7, NONE, FAST_SR1); > + }; > +}; > + > +&pinctrl_imem { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_imem>; > + > + initial_imem: initial-state { > + PIN(INPUT, gpf0-0, UP, FAST_SR1); > + PIN(INPUT, gpf0-1, UP, FAST_SR1); > + PIN(INPUT, gpf0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-3, UP, FAST_SR1); > + PIN(INPUT, gpf0-4, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-5, NONE, FAST_SR1); > + PIN(INPUT, gpf0-6, DOWN, FAST_SR1); > + PIN(INPUT, gpf0-7, UP, FAST_SR1); > + }; > +}; > + > +&pinctrl_nfc { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_nfc>; > + > + initial_nfc: initial-state { > + PIN(INPUT, gpj0-2, DOWN, FAST_SR1); > + }; > +}; > + > +&pinctrl_peric { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_peric>; > + > + initial_peric: initial-state { > + PIN(INPUT, gpv7-0, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-1, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-2, NONE, FAST_SR1); > + PIN(INPUT, gpv7-3, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-4, DOWN, FAST_SR1); > + PIN(INPUT, gpv7-5, DOWN, FAST_SR1); > + > + PIN(INPUT, gpb0-4, DOWN, FAST_SR1); > + > + PIN(INPUT, gpc0-2, DOWN, FAST_SR1); > + PIN(INPUT, gpc0-5, DOWN, FAST_SR1); > + PIN(INPUT, gpc0-7, DOWN, FAST_SR1); > + > + PIN(INPUT, gpc1-1, DOWN, FAST_SR1); > + > + PIN(INPUT, gpc3-4, NONE, FAST_SR1); > + PIN(INPUT, gpc3-5, NONE, FAST_SR1); > + PIN(INPUT, gpc3-6, NONE, FAST_SR1); > + PIN(INPUT, gpc3-7, NONE, FAST_SR1); > + > + PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); > + PIN(2, gpg0-1, DOWN, FAST_SR1); > + > + PIN(INPUT, gpd2-5, DOWN, FAST_SR1); > + > + PIN(INPUT, gpd4-0, NONE, FAST_SR1); > + PIN(INPUT, gpd4-1, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-2, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-3, DOWN, FAST_SR1); > + PIN(INPUT, gpd4-4, DOWN, FAST_SR1); > + > + PIN(INPUT, gpd6-3, DOWN, FAST_SR1); > + > + PIN(INPUT, gpd8-1, UP, FAST_SR1); > + > + PIN(INPUT, gpg1-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-1, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-2, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-3, DOWN, FAST_SR1); > + PIN(INPUT, gpg1-4, DOWN, FAST_SR1); > + > + PIN(INPUT, gpg2-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg2-1, DOWN, FAST_SR1); > + > + PIN(INPUT, gpg3-0, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-1, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-5, DOWN, FAST_SR1); > + PIN(INPUT, gpg3-7, DOWN, FAST_SR1); > + }; > +}; > + > +&pinctrl_touch { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_touch>; > + > + initial_touch: initial-state { > + PIN(INPUT, gpj1-2, DOWN, FAST_SR1); > + }; > +}; > + > +&pwm { > + pinctrl-0 = <&pwm0_out>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&mic { > + status = "okay"; > + > + i80-if-timings { > + }; > +}; > + > +&pmu_system_controller { > + assigned-clocks = <&pmu_system_controller 0>; > + assigned-clock-parents = <&xxti>; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&spi_1 { > + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + wm5110: wm5110-codec@0 { > + compatible = "wlf,wm5110"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + interrupt-parent = <&gpa0>; > + interrupts = <4 IRQ_TYPE_NONE>; > + clocks = <&pmu_system_controller 0>, > + <&s2mps13_osc S2MPS11_CLK_BT>; > + clock-names = "mclk1", "mclk2"; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + wlf,micd-detect-debounce = <300>; > + wlf,micd-bias-start-time = <0x1>; > + wlf,micd-rate = <0x7>; > + wlf,micd-dbtime = <0x1>; > + wlf,micd-force-micbias; > + wlf,micd-configs = <0x0 1 0>; > + wlf,hpdet-channel = <1>; > + wlf,gpsw = <0x1>; > + wlf,inmode = <2 0 2 0>; > + > + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; > + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; > + > + /* core supplies */ > + AVDD-supply = <&ldo18_reg>; > + DBVDD1-supply = <&ldo18_reg>; > + CPVDD-supply = <&ldo18_reg>; > + DBVDD2-supply = <&ldo18_reg>; > + DBVDD3-supply = <&ldo18_reg>; > + > + controller-data { > + samsung,spi-feedback-delay = <0>; > + }; > + }; > +}; > + > +&timer { > + clock-frequency = <24000000>; > +}; > + > +&tmu_atlas0 { > + vtmu-supply = <&ldo3_reg>; > + status = "okay"; > +}; > + > +&tmu_apollo { > + vtmu-supply = <&ldo3_reg>; > + status = "okay"; > +}; > + > +&tmu_g3d { > + vtmu-supply = <&ldo3_reg>; > + status = "okay"; > +}; > + > +&usbdrd30 { > + vdd33-supply = <&ldo10_reg>; > + vdd10-supply = <&ldo6_reg>; > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + dr_mode = "otg"; > +}; > + > +&usbdrd30_phy { > + vbus-supply = <&safeout1_reg>; > + status = "okay"; > +}; > + > +&xxti { > + clock-frequency = <24000000>; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > dissimilarity index 98% > index e8971f4..d30b45a 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -1,1120 +1,33 @@ > -/* > - * SAMSUNG Exynos5433 TM2 board device tree source > - * > - * Copyright (c) 2016 Samsung Electronics Co., Ltd. > - * > - * Device tree source file for Samsung's TM2 board which is based on > - * Samsung Exynos5433 SoC. > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - */ > - > -/dts-v1/; > -#include "exynos5433.dtsi" > -#include <dt-bindings/clock/samsung,s2mps11.h> > -#include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/input/input.h> > -#include <dt-bindings/interrupt-controller/irq.h> > - > -/ { > - model = "Samsung TM2 board"; > - compatible = "samsung,tm2", "samsung,exynos5433"; > - > - aliases { > - gsc0 = &gsc_0; > - gsc1 = &gsc_1; > - gsc2 = &gsc_2; > - pinctrl0 = &pinctrl_alive; > - pinctrl1 = &pinctrl_aud; > - pinctrl2 = &pinctrl_cpif; > - pinctrl3 = &pinctrl_ese; > - pinctrl4 = &pinctrl_finger; > - pinctrl5 = &pinctrl_fsys; > - pinctrl6 = &pinctrl_imem; > - pinctrl7 = &pinctrl_nfc; > - pinctrl8 = &pinctrl_peric; > - pinctrl9 = &pinctrl_touch; > - serial0 = &serial_0; > - serial1 = &serial_1; > - serial2 = &serial_2; > - serial3 = &serial_3; > - spi0 = &spi_0; > - spi1 = &spi_1; > - spi2 = &spi_2; > - spi3 = &spi_3; > - spi4 = &spi_4; > - mshc0 = &mshc_0; > - mshc2 = &mshc_2; > - }; > - > - chosen { > - stdout-path = &serial_1; > - }; > - > - memory@20000000 { > - device_type = "memory"; > - reg = <0x0 0x20000000 0x0 0xc0000000>; > - }; > - > - gpio-keys { > - compatible = "gpio-keys"; > - > - power-key { > - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; > - linux,code = <KEY_POWER>; > - label = "power key"; > - debounce-interval = <10>; > - }; > - > - volume-up-key { > - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; > - linux,code = <KEY_VOLUMEUP>; > - label = "volume-up key"; > - debounce-interval = <10>; > - }; > - > - volume-down-key { > - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; > - linux,code = <KEY_VOLUMEDOWN>; > - label = "volume-down key"; > - debounce-interval = <10>; > - }; > - > - homepage-key { > - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; > - linux,code = <KEY_MENU>; > - label = "homepage key"; > - debounce-interval = <10>; > - }; > - }; > - > - i2c_max98504: i2c-gpio-0 { > - compatible = "i2c-gpio"; > - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ > - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; > - i2c-gpio,delay-us = <2>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "okay"; > - > - max98504: max98504@31 { > - compatible = "maxim,max98504"; > - reg = <0x31>; > - maxim,rx-path = <1>; > - maxim,tx-path = <1>; > - maxim,tx-channel-mask = <3>; > - maxim,tx-channel-source = <2>; > - }; > - }; > - > - sound { > - compatible = "samsung,tm2-audio"; > - audio-codec = <&wm5110>; > - i2s-controller = <&i2s0>; > - audio-amplifier = <&max98504>; > - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; > - model = "wm5110"; > - samsung,audio-routing = > - /* Headphone */ > - "HP", "HPOUT1L", > - "HP", "HPOUT1R", > - > - /* Speaker */ > - "SPK", "SPKOUT", > - "SPKOUT", "HPOUT2L", > - "SPKOUT", "HPOUT2R", > - > - /* Receiver */ > - "RCV", "HPOUT3L", > - "RCV", "HPOUT3R"; > - status = "okay"; > - }; > -}; > - > -&adc { > - vdd-supply = <&ldo3_reg>; > - status = "okay"; > - > - thermistor-ap { > - compatible = "murata,ncp03wf104"; > - pullup-uv = <1800000>; > - pullup-ohm = <100000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 0>; > - }; > - > - thermistor-battery { > - compatible = "murata,ncp03wf104"; > - pullup-uv = <1800000>; > - pullup-ohm = <100000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 1>; > - #thermal-sensor-cells = <0>; > - }; > - > - thermistor-charger { > - compatible = "murata,ncp03wf104"; > - pullup-uv = <1800000>; > - pullup-ohm = <100000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 2>; > - }; > -}; > - > -&bus_g2d_400 { > - devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; > - vdd-supply = <&buck4_reg>; > - exynos,saturation-ratio = <10>; > - status = "okay"; > -}; > - > -&bus_g2d_266 { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_gscl { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_hevc { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_jpeg { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_mfc { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_mscl { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_noc0 { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_noc1 { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&bus_noc2 { > - devfreq = <&bus_g2d_400>; > - status = "okay"; > -}; > - > -&cmu_aud { > - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; > - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; > -}; > - > -&cmu_fsys { > - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, > - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, > - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, > - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, > - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, > - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, > - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, > - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, > - <&cmu_top CLK_DIV_SCLK_USBDRD30>, > - <&cmu_top CLK_DIV_SCLK_USBHOST30>; > - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, > - <&cmu_top CLK_MOUT_BUS_PLL_USER>, > - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, > - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, > - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, > - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, > - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, > - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; > - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, > - <66700000>, <66700000>; > -}; > - > -&cmu_gscl { > - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, > - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; > - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, > - <&cmu_top CLK_ACLK_GSCL_333>; > -}; > - > -&cmu_mfc { > - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; > - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; > -}; > - > -&cmu_mscl { > - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, > - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, > - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, > - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; > - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, > - <&cmu_top CLK_SCLK_JPEG_MSCL>, > - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, > - <&cmu_top CLK_MOUT_BUS_PLL_USER>; > -}; > - > -&cpu0 { > - cpu-supply = <&buck3_reg>; > -}; > - > -&cpu4 { > - cpu-supply = <&buck2_reg>; > -}; > - > -&decon { > - status = "okay"; > - > - i80-if-timings { > - }; > -}; > - > -&dsi { > - status = "okay"; > - vddcore-supply = <&ldo6_reg>; > - vddio-supply = <&ldo7_reg>; > - samsung,pll-clock-frequency = <24000000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&te_irq>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@1 { > - reg = <1>; > - > - dsi_out: endpoint { > - samsung,burst-clock-frequency = <512000000>; > - samsung,esc-clock-frequency = <16000000>; > - }; > - }; > - }; > -}; > - > -&hsi2c_0 { > - status = "okay"; > - clock-frequency = <2500000>; > - > - s2mps13-pmic@66 { > - compatible = "samsung,s2mps13-pmic"; > - interrupt-parent = <&gpa0>; > - interrupts = <7 IRQ_TYPE_NONE>; > - reg = <0x66>; > - samsung,s2mps11-wrstbi-ground; > - > - s2mps13_osc: clocks { > - compatible = "samsung,s2mps13-clk"; > - #clock-cells = <1>; > - clock-output-names = "s2mps13_ap", "s2mps13_cp", > - "s2mps13_bt"; > - }; > - > - regulators { > - ldo1_reg: LDO1 { > - regulator-name = "VDD_ALIVE_0.9V_AP"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - regulator-always-on; > - }; > - > - ldo2_reg: LDO2 { > - regulator-name = "VDDQ_MMC2_2.8V_AP"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo3_reg: LDO3 { > - regulator-name = "VDD1_E_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo4_reg: LDO4 { > - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; > - regulator-min-microvolt = <1300000>; > - regulator-max-microvolt = <1300000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo5_reg: LDO5 { > - regulator-name = "VDD10_DPLL_1.0V_AP"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo6_reg: LDO6 { > - regulator-name = "VDD10_MIPI2L_1.0V_AP"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo7_reg: LDO7 { > - regulator-name = "VDD18_MIPI2L_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo8_reg: LDO8 { > - regulator-name = "VDD18_LLI_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo9_reg: LDO9 { > - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo10_reg: LDO10 { > - regulator-name = "VDD33_USB30_3.0V_AP"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo11_reg: LDO11 { > - regulator-name = "VDD_INT_M_1.0V_AP"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo12_reg: LDO12 { > - regulator-name = "VDD_KFC_M_1.1V_AP"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1350000>; > - regulator-always-on; > - }; > - > - ldo13_reg: LDO13 { > - regulator-name = "VDD_G3D_M_0.95V_AP"; > - regulator-min-microvolt = <950000>; > - regulator-max-microvolt = <950000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo14_reg: LDO14 { > - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo15_reg: LDO15 { > - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - ldo16_reg: LDO16 { > - regulator-name = "VDDQ_EFUSE"; > - regulator-min-microvolt = <1400000>; > - regulator-max-microvolt = <3400000>; > - regulator-always-on; > - }; > - > - ldo17_reg: LDO17 { > - regulator-name = "V_TFLASH_2.8V_AP"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - }; > - > - ldo18_reg: LDO18 { > - regulator-name = "V_CODEC_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo19_reg: LDO19 { > - regulator-name = "VDDA_1.8V_COMP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - }; > - > - ldo20_reg: LDO20 { > - regulator-name = "VCC_2.8V_AP"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-always-on; > - }; > - > - ldo21_reg: LDO21 { > - regulator-name = "VT_CAM_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo22_reg: LDO22 { > - regulator-name = "CAM_IO_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo23_reg: LDO23 { > - regulator-name = "CAM_SEN_CORE_1.05V_AP"; > - regulator-min-microvolt = <1050000>; > - regulator-max-microvolt = <1050000>; > - }; > - > - ldo24_reg: LDO24 { > - regulator-name = "VT_CAM_1.2V"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - }; > - > - ldo25_reg: LDO25 { > - regulator-name = "UNUSED_LDO25"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - regulator-always-off; > - }; > - > - ldo26_reg: LDO26 { > - regulator-name = "CAM_AF_2.8V_AP"; > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - }; > - > - ldo27_reg: LDO27 { > - regulator-name = "VCC_3.0V_LCD_AP"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - }; > - > - ldo28_reg: LDO28 { > - regulator-name = "VCC_1.8V_LCD_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo29_reg: LDO29 { > - regulator-name = "VT_CAM_2.8V"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - }; > - > - ldo30_reg: LDO30 { > - regulator-name = "TSP_AVDD_3.3V_AP"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - ldo31_reg: LDO31 { > - regulator-name = "TSP_VDD_1.85V_AP"; > - regulator-min-microvolt = <1850000>; > - regulator-max-microvolt = <1850000>; > - }; > - > - ldo32_reg: LDO32 { > - regulator-name = "VTOUCH_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo33_reg: LDO33 { > - regulator-name = "VTOUCH_LED_3.3V"; > - regulator-min-microvolt = <2500000>; > - regulator-max-microvolt = <3300000>; > - regulator-ramp-delay = <12500>; > - }; > - > - ldo34_reg: LDO34 { > - regulator-name = "VCC_1.8V_MHL_AP"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <2100000>; > - }; > - > - ldo35_reg: LDO35 { > - regulator-name = "OIS_VM_2.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <2800000>; > - }; > - > - ldo36_reg: LDO36 { > - regulator-name = "VSIL_1.0V"; > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - }; > - > - ldo37_reg: LDO37 { > - regulator-name = "VF_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo38_reg: LDO38 { > - regulator-name = "VCC_3.0V_MOTOR_AP"; > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - }; > - > - ldo39_reg: LDO39 { > - regulator-name = "V_HRM_1.8V"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - ldo40_reg: LDO40 { > - regulator-name = "V_HRM_3.3V"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - }; > - > - buck1_reg: BUCK1 { > - regulator-name = "VDD_MIF_0.9V_AP"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <1500000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck2_reg: BUCK2 { > - regulator-name = "VDD_EGL_1.0V_AP"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <1300000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck3_reg: BUCK3 { > - regulator-name = "VDD_KFC_1.0V_AP"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck4_reg: BUCK4 { > - regulator-name = "VDD_INT_0.95V_AP"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <1500000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck5_reg: BUCK5 { > - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <1500000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck6_reg: BUCK6 { > - regulator-name = "VDD_G3D_0.9V_AP"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <1500000>; > - regulator-always-on; > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - buck7_reg: BUCK7 { > - regulator-name = "VDD_MEM1_1.2V_AP"; > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - regulator-always-on; > - }; > - > - buck8_reg: BUCK8 { > - regulator-name = "VDD_LLDO_1.35V_AP"; > - regulator-min-microvolt = <1350000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - }; > - > - buck9_reg: BUCK9 { > - regulator-name = "VDD_MLDO_2.0V_AP"; > - regulator-min-microvolt = <1350000>; > - regulator-max-microvolt = <3300000>; > - regulator-always-on; > - }; > - > - buck10_reg: BUCK10 { > - regulator-name = "vdd_mem2"; > - regulator-min-microvolt = <550000>; > - regulator-max-microvolt = <1500000>; > - regulator-always-on; > - }; > - }; > - }; > -}; > - > -&hsi2c_8 { > - status = "okay"; > - > - max77843@66 { > - compatible = "maxim,max77843"; > - interrupt-parent = <&gpa1>; > - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; > - reg = <0x66>; > - > - muic: max77843-muic { > - compatible = "maxim,max77843-muic"; > - }; > - > - regulators { > - compatible = "maxim,max77843-regulator"; > - safeout1_reg: SAFEOUT1 { > - regulator-name = "SAFEOUT1"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <4950000>; > - }; > - > - safeout2_reg: SAFEOUT2 { > - regulator-name = "SAFEOUT2"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <4950000>; > - }; > - > - charger_reg: CHARGER { > - regulator-name = "CHARGER"; > - regulator-min-microamp = <100000>; > - regulator-max-microamp = <3150000>; > - }; > - }; > - > - haptic: max77843-haptic { > - compatible = "maxim,max77843-haptic"; > - haptic-supply = <&ldo38_reg>; > - pwms = <&pwm 0 33670 0>; > - pwm-names = "haptic"; > - }; > - }; > -}; > - > -&i2s0 { > - status = "okay"; > -}; > - > -&mshc_0 { > - status = "okay"; > - num-slots = <1>; > - mmc-hs200-1_8v; > - mmc-hs400-1_8v; > - cap-mmc-highspeed; > - non-removable; > - card-detect-delay = <200>; > - samsung,dw-mshc-ciu-div = <3>; > - samsung,dw-mshc-sdr-timing = <0 4>; > - samsung,dw-mshc-ddr-timing = <0 2>; > - samsung,dw-mshc-hs400-timing = <0 3>; > - samsung,read-strobe-delay = <90>; > - fifo-depth = <0x80>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 > - &sd0_bus8 &sd0_rdqs>; > - bus-width = <8>; > - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; > - assigned-clock-rates = <800000000>; > -}; > - > -&mshc_2 { > - status = "okay"; > - num-slots = <1>; > - cap-sd-highspeed; > - disable-wp; > - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; > - cd-inverted; > - card-detect-delay = <200>; > - samsung,dw-mshc-ciu-div = <3>; > - samsung,dw-mshc-sdr-timing = <0 4>; > - samsung,dw-mshc-ddr-timing = <0 2>; > - fifo-depth = <0x80>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; > - bus-width = <4>; > -}; > - > -&ppmu_d0_general { > - status = "okay"; > - events { > - ppmu_event0_d0_general: ppmu-event0-d0-general { > - event-name = "ppmu-event0-d0-general"; > - }; > - }; > -}; > - > -&ppmu_d1_general { > - status = "okay"; > - events { > - ppmu_event0_d1_general: ppmu-event0-d1-general { > - event-name = "ppmu-event0-d1-general"; > - }; > - }; > -}; > - > -&pinctrl_alive { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_alive>; > - > - initial_alive: initial-state { > - PIN(INPUT, gpa0-0, DOWN, FAST_SR1); > - PIN(INPUT, gpa0-1, NONE, FAST_SR1); > - PIN(INPUT, gpa0-2, DOWN, FAST_SR1); > - PIN(INPUT, gpa0-3, NONE, FAST_SR1); > - PIN(INPUT, gpa0-4, NONE, FAST_SR1); > - PIN(INPUT, gpa0-5, DOWN, FAST_SR1); > - PIN(INPUT, gpa0-6, NONE, FAST_SR1); > - PIN(INPUT, gpa0-7, NONE, FAST_SR1); > - > - PIN(INPUT, gpa1-0, UP, FAST_SR1); > - PIN(INPUT, gpa1-1, NONE, FAST_SR1); > - PIN(INPUT, gpa1-2, NONE, FAST_SR1); > - PIN(INPUT, gpa1-3, DOWN, FAST_SR1); > - PIN(INPUT, gpa1-4, DOWN, FAST_SR1); > - PIN(INPUT, gpa1-5, NONE, FAST_SR1); > - PIN(INPUT, gpa1-6, NONE, FAST_SR1); > - PIN(INPUT, gpa1-7, NONE, FAST_SR1); > - > - PIN(INPUT, gpa2-0, NONE, FAST_SR1); > - PIN(INPUT, gpa2-1, NONE, FAST_SR1); > - PIN(INPUT, gpa2-2, NONE, FAST_SR1); > - PIN(INPUT, gpa2-3, DOWN, FAST_SR1); > - PIN(INPUT, gpa2-4, NONE, FAST_SR1); > - PIN(INPUT, gpa2-5, DOWN, FAST_SR1); > - PIN(INPUT, gpa2-6, DOWN, FAST_SR1); > - PIN(INPUT, gpa2-7, NONE, FAST_SR1); > - > - PIN(INPUT, gpa3-0, DOWN, FAST_SR1); > - PIN(INPUT, gpa3-1, DOWN, FAST_SR1); > - PIN(INPUT, gpa3-2, NONE, FAST_SR1); > - PIN(INPUT, gpa3-3, DOWN, FAST_SR1); > - PIN(INPUT, gpa3-4, NONE, FAST_SR1); > - PIN(INPUT, gpa3-5, DOWN, FAST_SR1); > - PIN(INPUT, gpa3-6, DOWN, FAST_SR1); > - PIN(INPUT, gpa3-7, DOWN, FAST_SR1); > - > - PIN(INPUT, gpf1-0, NONE, FAST_SR1); > - PIN(INPUT, gpf1-1, NONE, FAST_SR1); > - PIN(INPUT, gpf1-2, DOWN, FAST_SR1); > - PIN(INPUT, gpf1-4, UP, FAST_SR1); > - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); > - PIN(INPUT, gpf1-6, DOWN, FAST_SR1); > - PIN(INPUT, gpf1-7, DOWN, FAST_SR1); > - > - PIN(INPUT, gpf2-0, DOWN, FAST_SR1); > - PIN(INPUT, gpf2-1, DOWN, FAST_SR1); > - PIN(INPUT, gpf2-2, DOWN, FAST_SR1); > - PIN(INPUT, gpf2-3, DOWN, FAST_SR1); > - > - PIN(INPUT, gpf3-0, DOWN, FAST_SR1); > - PIN(INPUT, gpf3-1, DOWN, FAST_SR1); > - PIN(INPUT, gpf3-2, NONE, FAST_SR1); > - PIN(INPUT, gpf3-3, DOWN, FAST_SR1); > - > - PIN(INPUT, gpf4-0, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-1, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-2, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-3, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-4, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-5, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-6, DOWN, FAST_SR1); > - PIN(INPUT, gpf4-7, DOWN, FAST_SR1); > - > - PIN(INPUT, gpf5-0, DOWN, FAST_SR1); > - PIN(INPUT, gpf5-1, DOWN, FAST_SR1); > - PIN(INPUT, gpf5-2, DOWN, FAST_SR1); > - PIN(INPUT, gpf5-3, DOWN, FAST_SR1); > - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); > - PIN(INPUT, gpf5-5, DOWN, FAST_SR1); > - PIN(INPUT, gpf5-6, DOWN, FAST_SR1); > - PIN(INPUT, gpf5-7, DOWN, FAST_SR1); > - }; > - > - te_irq: te_irq { > - samsung,pins = "gpf1-3"; > - samsung,pin-function = <0xf>; > - }; > -}; > - > -&pinctrl_cpif { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_cpif>; > - > - initial_cpif: initial-state { > - PIN(INPUT, gpv6-0, DOWN, FAST_SR1); > - PIN(INPUT, gpv6-1, DOWN, FAST_SR1); > - }; > -}; > - > -&pinctrl_ese { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_ese>; > - > - initial_ese: initial-state { > - PIN(INPUT, gpj2-0, DOWN, FAST_SR1); > - PIN(INPUT, gpj2-1, DOWN, FAST_SR1); > - PIN(INPUT, gpj2-2, DOWN, FAST_SR1); > - }; > -}; > - > -&pinctrl_fsys { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_fsys>; > - > - initial_fsys: initial-state { > - PIN(INPUT, gpr3-0, NONE, FAST_SR1); > - PIN(INPUT, gpr3-1, DOWN, FAST_SR1); > - PIN(INPUT, gpr3-2, DOWN, FAST_SR1); > - PIN(INPUT, gpr3-3, DOWN, FAST_SR1); > - PIN(INPUT, gpr3-7, NONE, FAST_SR1); > - }; > -}; > - > -&pinctrl_imem { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_imem>; > - > - initial_imem: initial-state { > - PIN(INPUT, gpf0-0, UP, FAST_SR1); > - PIN(INPUT, gpf0-1, UP, FAST_SR1); > - PIN(INPUT, gpf0-2, DOWN, FAST_SR1); > - PIN(INPUT, gpf0-3, UP, FAST_SR1); > - PIN(INPUT, gpf0-4, DOWN, FAST_SR1); > - PIN(INPUT, gpf0-5, NONE, FAST_SR1); > - PIN(INPUT, gpf0-6, DOWN, FAST_SR1); > - PIN(INPUT, gpf0-7, UP, FAST_SR1); > - }; > -}; > - > -&pinctrl_nfc { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_nfc>; > - > - initial_nfc: initial-state { > - PIN(INPUT, gpj0-2, DOWN, FAST_SR1); > - }; > -}; > - > -&pinctrl_peric { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_peric>; > - > - initial_peric: initial-state { > - PIN(INPUT, gpv7-0, DOWN, FAST_SR1); > - PIN(INPUT, gpv7-1, DOWN, FAST_SR1); > - PIN(INPUT, gpv7-2, NONE, FAST_SR1); > - PIN(INPUT, gpv7-3, DOWN, FAST_SR1); > - PIN(INPUT, gpv7-4, DOWN, FAST_SR1); > - PIN(INPUT, gpv7-5, DOWN, FAST_SR1); > - > - PIN(INPUT, gpb0-4, DOWN, FAST_SR1); > - > - PIN(INPUT, gpc0-2, DOWN, FAST_SR1); > - PIN(INPUT, gpc0-5, DOWN, FAST_SR1); > - PIN(INPUT, gpc0-7, DOWN, FAST_SR1); > - > - PIN(INPUT, gpc1-1, DOWN, FAST_SR1); > - > - PIN(INPUT, gpc3-4, NONE, FAST_SR1); > - PIN(INPUT, gpc3-5, NONE, FAST_SR1); > - PIN(INPUT, gpc3-6, NONE, FAST_SR1); > - PIN(INPUT, gpc3-7, NONE, FAST_SR1); > - > - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); > - PIN(2, gpg0-1, DOWN, FAST_SR1); > - > - PIN(INPUT, gpd2-5, DOWN, FAST_SR1); > - > - PIN(INPUT, gpd4-0, NONE, FAST_SR1); > - PIN(INPUT, gpd4-1, DOWN, FAST_SR1); > - PIN(INPUT, gpd4-2, DOWN, FAST_SR1); > - PIN(INPUT, gpd4-3, DOWN, FAST_SR1); > - PIN(INPUT, gpd4-4, DOWN, FAST_SR1); > - > - PIN(INPUT, gpd6-3, DOWN, FAST_SR1); > - > - PIN(INPUT, gpd8-1, UP, FAST_SR1); > - > - PIN(INPUT, gpg1-0, DOWN, FAST_SR1); > - PIN(INPUT, gpg1-1, DOWN, FAST_SR1); > - PIN(INPUT, gpg1-2, DOWN, FAST_SR1); > - PIN(INPUT, gpg1-3, DOWN, FAST_SR1); > - PIN(INPUT, gpg1-4, DOWN, FAST_SR1); > - > - PIN(INPUT, gpg2-0, DOWN, FAST_SR1); > - PIN(INPUT, gpg2-1, DOWN, FAST_SR1); > - > - PIN(INPUT, gpg3-0, DOWN, FAST_SR1); > - PIN(INPUT, gpg3-1, DOWN, FAST_SR1); > - PIN(INPUT, gpg3-5, DOWN, FAST_SR1); > - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); > - }; > -}; > - > -&pinctrl_touch { > - pinctrl-names = "default"; > - pinctrl-0 = <&initial_touch>; > - > - initial_touch: initial-state { > - PIN(INPUT, gpj1-2, DOWN, FAST_SR1); > - }; > -}; > - > -&pwm { > - pinctrl-0 = <&pwm0_out>; > - pinctrl-names = "default"; > - status = "okay"; > -}; > - > -&mic { > - status = "okay"; > - > - i80-if-timings { > - }; > -}; > - > -&pmu_system_controller { > - assigned-clocks = <&pmu_system_controller 0>; > - assigned-clock-parents = <&xxti>; > -}; > - > -&serial_1 { > - status = "okay"; > -}; > - > -&spi_1 { > - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; > - status = "okay"; > - > - wm5110: wm5110-codec@0 { > - compatible = "wlf,wm5110"; > - reg = <0x0>; > - spi-max-frequency = <20000000>; > - interrupt-parent = <&gpa0>; > - interrupts = <4 IRQ_TYPE_NONE>; > - clocks = <&pmu_system_controller 0>, > - <&s2mps13_osc S2MPS11_CLK_BT>; > - clock-names = "mclk1", "mclk2"; > - > - gpio-controller; > - #gpio-cells = <2>; > - > - wlf,micd-detect-debounce = <300>; > - wlf,micd-bias-start-time = <0x1>; > - wlf,micd-rate = <0x7>; > - wlf,micd-dbtime = <0x1>; > - wlf,micd-force-micbias; > - wlf,micd-configs = <0x0 1 0>; > - wlf,hpdet-channel = <1>; > - wlf,gpsw = <0x1>; > - wlf,inmode = <2 0 2 0>; > - > - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; > - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; > - > - /* core supplies */ > - AVDD-supply = <&ldo18_reg>; > - DBVDD1-supply = <&ldo18_reg>; > - CPVDD-supply = <&ldo18_reg>; > - DBVDD2-supply = <&ldo18_reg>; > - DBVDD3-supply = <&ldo18_reg>; > - > - controller-data { > - samsung,spi-feedback-delay = <0>; > - }; > - }; > -}; > - > -&timer { > - clock-frequency = <24000000>; > -}; > - > -&tmu_atlas0 { > - vtmu-supply = <&ldo3_reg>; > - status = "okay"; > -}; > - > -&tmu_apollo { > - vtmu-supply = <&ldo3_reg>; > - status = "okay"; > -}; > - > -&tmu_g3d { > - vtmu-supply = <&ldo3_reg>; > - status = "okay"; > -}; > - > -&usbdrd30 { > - vdd33-supply = <&ldo10_reg>; > - vdd10-supply = <&ldo6_reg>; > - status = "okay"; > -}; > - > -&usbdrd_dwc3_0 { > - dr_mode = "otg"; > -}; > - > -&usbdrd30_phy { > - vbus-supply = <&safeout1_reg>; > - status = "okay"; > -}; > - > -&xxti { > - clock-frequency = <24000000>; > -}; > +/* > + * SAMSUNG Exynos5433 TM2 board device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Device tree source file for Samsung's TM2 board which is based on > + * Samsung Exynos5433 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include "exynos5433-tm2-common.dtsi" > + > +/ { > + model = "Samsung TM2E board"; > + compatible = "samsung,tm2e", "samsung,exynos5433"; > +}; > + > +®ulators { > + ldo31_reg: LDO31 { > + regulator-name = "TSP_VDD_1.85V_AP"; > + regulator-min-microvolt = <1850000>; > + regulator-max-microvolt = <1850000>; > + }; > + > + ldo38_reg: LDO38 { > + regulator-name = "VCC_3.0V_MOTOR_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > index 854c583..53e361f 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts > @@ -11,21 +11,23 @@ > * published by the Free Software Foundation. > */ > > -#include "exynos5433-tm2.dts" > +#include "exynos5433-tm2-common.dtsi" > > / { > model = "Samsung TM2E board"; > compatible = "samsung,tm2e", "samsung,exynos5433"; > }; > > -&ldo31_reg { > - regulator-name = "TSP_VDD_1.8V_AP"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > -}; > +®ulators { > + ldo31_reg: LDO31 { > + regulator-name = "TSP_VDD_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > > -&ldo38_reg { > - regulator-name = "VCC_3.3V_MOTOR_AP"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > + ldo38_reg: LDO38 { > + regulator-name = "VCC_3.3V_MOTOR_AP"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > }; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other 2017-01-06 7:09 ` Krzysztof Kozlowski @ 2017-01-06 7:59 ` Andi Shyti 2017-01-06 8:37 ` Krzysztof Kozlowski 0 siblings, 1 reply; 15+ messages in thread From: Andi Shyti @ 2017-01-06 7:59 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc Hi, On Fri, Jan 06, 2017 at 09:09:11AM +0200, Krzysztof Kozlowski wrote: > On Fri, Jan 06, 2017 at 12:59:06PM +0900, Jaechul Lee wrote: > > From: Andi Shyti <andi.shyti@samsung.com> > > > > Currently tm2e dts includes tm2 but there are some differences > > between the two boards and tm2 has some properties that tm2e > > doesn't have. > > > > That's why it's important to keep the two dts files independent > > and put all the commonalities in a tm2-common.dtsi file. > > > > At the current status the only two differences between the two > > dts files (besides the board name) are ldo31 and ldo38. > > > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > > --- > > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 +++++++++++++++++++ > > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- > > Like talking to a wall. Without any feedback. If my instructions were > wrong (and it is not possible to detect rename) then please say it (you > can add personal comments after separator ---). no Krzysztof, I'm sorry, but this patch has been formatted with the diff algorithm *you* asked, -B50% both version 2 (where you didn't comment) and version 3. If you still don't like it, please don't blame me, blame the algorithm. Now we can stay here at trying random diff algorithms (as they give more or less the same result) or you tell me which exact algorithm you want me to use. Besides, for me it's clear, tm2-common is all new, while in tm2 you have on one side the '-' (if it applies nothing has changed) on the bottom the '+'. Andi ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other 2017-01-06 7:59 ` Andi Shyti @ 2017-01-06 8:37 ` Krzysztof Kozlowski 2017-01-06 9:25 ` Andi Shyti 0 siblings, 1 reply; 15+ messages in thread From: Krzysztof Kozlowski @ 2017-01-06 8:37 UTC (permalink / raw) To: Andi Shyti Cc: Krzysztof Kozlowski, Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc On Fri, Jan 06, 2017 at 04:59:14PM +0900, Andi Shyti wrote: > Hi, > > On Fri, Jan 06, 2017 at 09:09:11AM +0200, Krzysztof Kozlowski wrote: > > On Fri, Jan 06, 2017 at 12:59:06PM +0900, Jaechul Lee wrote: > > > From: Andi Shyti <andi.shyti@samsung.com> > > > > > > Currently tm2e dts includes tm2 but there are some differences > > > between the two boards and tm2 has some properties that tm2e > > > doesn't have. > > > > > > That's why it's important to keep the two dts files independent > > > and put all the commonalities in a tm2-common.dtsi file. > > > > > > At the current status the only two differences between the two > > > dts files (besides the board name) are ldo31 and ldo38. > > > > > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > > > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > > > --- > > > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 +++++++++++++++++++ > > > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- > > > > Like talking to a wall. Without any feedback. If my instructions were > > wrong (and it is not possible to detect rename) then please say it (you > > can add personal comments after separator ---). > > no Krzysztof, I'm sorry, but this patch has been formatted with > the diff algorithm *you* asked, -B50% both version 2 (where you > didn't comment) and version 3. If you still don't like it, please > don't blame me, blame the algorithm. If you wrote it in cover letter or after '---' I wouldn't complain because I would know that my feedback was ignored. But here it is like black hole - I do not know whether I was ignored or it was not working. > > Now we can stay here at trying random diff algorithms (as they > give more or less the same result) or you tell me which exact > algorithm you want me to use. Besides, for me it's clear, > tm2-common is all new, while in tm2 you have on one side the '-' > (if it applies nothing has changed) on the bottom the '+'. Maybe that depends on the git? $ git --version git version 2.9.3 $ git format-patch -2 -B50% ... 21 ...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 24 +- 22 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- 23 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +- 24 3 files changed, 56 insertions(+), 1143 deletions(-) 25 copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%) 26 rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%) Best regards, Krzysztof ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other 2017-01-06 8:37 ` Krzysztof Kozlowski @ 2017-01-06 9:25 ` Andi Shyti 0 siblings, 0 replies; 15+ messages in thread From: Andi Shyti @ 2017-01-06 9:25 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Jaechul Lee, Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Javier Martinez Canillas, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc Hi Krzysztof, > > > > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1118 +++++++++++++++++++ > > > > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- > > > > > > Like talking to a wall. Without any feedback. If my instructions were > > > wrong (and it is not possible to detect rename) then please say it (you > > > can add personal comments after separator ---). > > > > no Krzysztof, I'm sorry, but this patch has been formatted with > > the diff algorithm *you* asked, -B50% both version 2 (where you > > didn't comment) and version 3. If you still don't like it, please > > don't blame me, blame the algorithm. > > If you wrote it in cover letter or after '---' I wouldn't complain > because I would know that my feedback was ignored. But here it is like > black hole - I do not know whether I was ignored or it was not working. In the cover letter is written: "- patch 3 diff has been generated with -B50%" in "Changes in v2:". In v3 patch 3 has become patch 2. > > Now we can stay here at trying random diff algorithms (as they > > give more or less the same result) or you tell me which exact > > algorithm you want me to use. Besides, for me it's clear, > > tm2-common is all new, while in tm2 you have on one side the '-' > > (if it applies nothing has changed) on the bottom the '+'. > > Maybe that depends on the git? > $ git --version > git version 2.9.3 > $ git format-patch -2 -B50% > ... > 21 ...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 24 +- > 22 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1153 +------------------- > 23 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 22 +- > 24 3 files changed, 56 insertions(+), 1143 deletions(-) > 25 copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%) > 26 rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%) I guess you're right, this has been generated from Jaechul's PC who perhaps has a different version. I have version 2.11.0 and I have same output as you. I will send the patch generated from my PC as reply to your mail. Andi ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v3 3/5] input: Add support for the tm2 touchkey device driver 2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Jaechul Lee @ 2017-01-06 3:59 ` Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 4/5] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 5/5] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee 4 siblings, 0 replies; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc This patch adds the binding description of the tm2 touchkey device driver. Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Rob Herring <robh@kernel.org> --- .../bindings/input/samsung,tm2-touchkey.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt diff --git a/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt new file mode 100644 index 0000000..4de1af0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt @@ -0,0 +1,27 @@ +Samsung tm2-touchkey + +Required properties: +- compatible: must be "samsung,tm2-touchkey" +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). +- vcc-supply : internal regulator output. 1.8V +- vdd-supply : power supply for IC 3.3V + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + &i2c0 { + /* ... */ + + touchkey@20 { + compatible = "samsung,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply=<&ldo32_reg>; + vdd-supply=<&ldo33_reg>; + }; + }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 4/5] input: tm2-touchkey: Add touchkey driver support for TM2 2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee ` (2 preceding siblings ...) 2017-01-06 3:59 ` [PATCH v3 3/5] input: Add support for the tm2 touchkey device driver Jaechul Lee @ 2017-01-06 3:59 ` Jaechul Lee 2017-01-06 3:59 ` [PATCH v3 5/5] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee 4 siblings, 0 replies; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc This patch adds support for the TM2 touch key and led functionality. The driver interfaces with userspace through an input device and reports KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by "/sys/class/leds/tm2-touchkey/brightness". Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> --- drivers/input/keyboard/Kconfig | 11 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tm2-touchkey.c | 280 ++++++++++++++++++++++++++++++++++ 3 files changed, 292 insertions(+) create mode 100644 drivers/input/keyboard/tm2-touchkey.c diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index cbd75cf..e6e9858 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X To compile this driver as a module, choose M here: the module will be called tc3589x-keypad. +config KEYBOARD_TM2_TOUCHKEY + tristate "tm2-touchkey support" + depends on I2C + depends on LEDS_CLASS + help + Say Y here to enable device driver for tm2-touchkey with + LED control for the Exynos5433 TM2 board. + + To compile this driver as a module, choose M here. + module will be called tm2-touchkey. + config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index d9f4cfc..7d9acff 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c new file mode 100644 index 0000000..92eacb6 --- /dev/null +++ b/drivers/input/keyboard/tm2-touchkey.c @@ -0,0 +1,280 @@ +/* + * TM2 touchkey device driver + * + * Copyright 2005 Phil Blundell + * Copyright 2016 Samsung Electronics Co., Ltd. + * + * Author: Beomho Seo <beomho.seo@samsung.com> + * Author: Jaechul Lee <jcsing.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/regulator/consumer.h> + +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" +#define TM2_TOUCHKEY_KEYCODE_REG 0x03 +#define TM2_TOUCHKEY_BASE_REG 0x00 +#define TM2_TOUCHKEY_CMD_LED_ON 0x10 +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20 +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 + +enum { + TM2_TOUCHKEY_KEY_MENU = 0x1, + TM2_TOUCHKEY_KEY_BACK, +}; + +struct tm2_touchkey_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct led_classdev led_dev; + struct regulator_bulk_data regulators[2]; + + u8 keycode_type; + u8 pressed; +}; + +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct tm2_touchkey_data *touchkey = + container_of(led_dev, struct tm2_touchkey_data, led_dev); + u32 volt; + u8 data; + + if (brightness == LED_OFF) { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; + data = TM2_TOUCHKEY_CMD_LED_OFF; + } else { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; + data = TM2_TOUCHKEY_CMD_LED_ON; + } + + regulator_set_voltage(touchkey->regulators[1].consumer, volt, volt); + i2c_smbus_write_byte_data(touchkey->client, + TM2_TOUCHKEY_BASE_REG, data); +} + +static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) +{ + int ret = 0; + + ret = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); + if (ret) + return ret; + + /* waiting for device initialization, at least 150ms */ + msleep(150); + + return 0; +} + +static void tm2_touchkey_power_disable(void *data) +{ + struct tm2_touchkey_data *touchkey = data; + + regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); +} + +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) +{ + struct tm2_touchkey_data *touchkey = devid; + u32 data; + + data = i2c_smbus_read_byte_data(touchkey->client, + TM2_TOUCHKEY_KEYCODE_REG); + + if (data < 0) { + dev_err(&touchkey->client->dev, "Failed to read i2c data\n"); + return IRQ_HANDLED; + } + + touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE; + touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV); + + if (touchkey->keycode_type != TM2_TOUCHKEY_KEY_MENU && + touchkey->keycode_type != TM2_TOUCHKEY_KEY_BACK) { + dev_warn(&touchkey->client->dev, "Skip unhandled keycode(%d)\n", + touchkey->keycode_type); + return IRQ_HANDLED; + } + + if (!touchkey->pressed) { + input_report_key(touchkey->input_dev, KEY_PHONE, 0); + input_report_key(touchkey->input_dev, KEY_BACK, 0); + } else { + if (touchkey->keycode_type == TM2_TOUCHKEY_KEY_MENU) + input_report_key(touchkey->input_dev, + KEY_PHONE, 1); + else + input_report_key(touchkey->input_dev, + KEY_BACK, 1); + } + input_sync(touchkey->input_dev); + + return IRQ_HANDLED; +} + +static int tm2_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tm2_touchkey_data *touchkey; + int ret; + + ret = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&client->dev, "No I2C functionality found\n"); + return -ENODEV; + } + + touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL); + if (!touchkey) + return -ENOMEM; + + touchkey->client = client; + i2c_set_clientdata(client, touchkey); + + /* regulators */ + touchkey->regulators[0].supply = "vcc"; + touchkey->regulators[1].supply = "vdd"; + ret = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(touchkey->regulators), + touchkey->regulators); + if (ret) { + dev_err(&client->dev, "Failed to get regulators\n"); + return ret; + } + + /* power */ + ret = tm2_touchkey_power_enable(touchkey); + if (ret) { + dev_err(&client->dev, "Failed to enable power\n"); + return ret; + } + + ret = devm_add_action_or_reset(&client->dev, + tm2_touchkey_power_disable, touchkey); + if (ret) + return ret; + + /* input device */ + touchkey->input_dev = devm_input_allocate_device(&client->dev); + if (!touchkey->input_dev) { + dev_err(&client->dev, "Failed to alloc input device\n"); + return -ENOMEM; + } + touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; + touchkey->input_dev->id.bustype = BUS_I2C; + + set_bit(EV_KEY, touchkey->input_dev->evbit); + input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE); + input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK); + + input_set_drvdata(touchkey->input_dev, touchkey); + + ret = input_register_device(touchkey->input_dev); + if (ret) { + dev_err(&client->dev, "Failed to register input device\n"); + return ret; + } + + /* irq */ + ret = devm_request_threaded_irq(&client->dev, + client->irq, NULL, + tm2_touchkey_irq_handler, + IRQF_ONESHOT, TM2_TOUCHKEY_DEV_NAME, + touchkey); + if (ret) { + dev_err(&client->dev, "Failed to request threaded irq\n"); + return ret; + } + + /* led device */ + touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; + touchkey->led_dev.brightness = LED_FULL; + touchkey->led_dev.max_brightness = LED_FULL; + touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set; + + ret = devm_led_classdev_register(&client->dev, &touchkey->led_dev); + if (ret < 0) { + dev_err(&client->dev, "Failed to register touchkey led\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused tm2_touchkey_suspend(struct device *dev) +{ + struct tm2_touchkey_data *touchkey = dev_get_drvdata(dev); + + disable_irq(touchkey->client->irq); + tm2_touchkey_power_disable(touchkey); + + return 0; +} + +static int __maybe_unused tm2_touchkey_resume(struct device *dev) +{ + struct tm2_touchkey_data *touchkey = dev_get_drvdata(dev); + int ret; + + enable_irq(touchkey->client->irq); + ret = tm2_touchkey_power_enable(touchkey); + if (ret) + dev_err(dev, "Failed to enable power\n"); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, tm2_touchkey_suspend, + tm2_touchkey_resume); + +static const struct i2c_device_id tm2_touchkey_id_table[] = { + {TM2_TOUCHKEY_DEV_NAME, 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); + +static const struct of_device_id tm2_touchkey_of_match[] = { + {.compatible = "samsung,tm2-touchkey",}, + {}, +}; +MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match); + +static struct i2c_driver tm2_touchkey_driver = { + .driver = { + .name = TM2_TOUCHKEY_DEV_NAME, + .pm = &tm2_touchkey_pm_ops, + .of_match_table = of_match_ptr(tm2_touchkey_of_match), + }, + .probe = tm2_touchkey_probe, + .id_table = tm2_touchkey_id_table, +}; + +module_i2c_driver(tm2_touchkey_driver); + +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); +MODULE_DESCRIPTION("Samsung touchkey driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 5/5] arm64: dts: exynos: Add tm2 touchkey node 2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee ` (3 preceding siblings ...) 2017-01-06 3:59 ` [PATCH v3 4/5] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee @ 2017-01-06 3:59 ` Jaechul Lee 4 siblings, 0 replies; 15+ messages in thread From: Jaechul Lee @ 2017-01-06 3:59 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon, Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas Cc: Jaechul Lee, Andi Shyti, Chanwoo Choi, beomho.seo, galaxyra, linux-arm-kernel, linux-input, devicetree, linux-kernel, linux-samsung-soc Add DT node support for TM2 touchkey device. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index d30b45a..15bdc2e 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -18,6 +18,19 @@ compatible = "samsung,tm2e", "samsung,exynos5433"; }; +&hsi2c_9 { + status = "okay"; + + touchkey@20 { + compatible = "samsung,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&ldo32_reg>; + vdd-supply = <&ldo33_reg>; + }; +}; + ®ulators { ldo31_reg: LDO31 { regulator-name = "TSP_VDD_1.85V_AP"; -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2017-01-06 9:28 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20170106035913epcas5p2b7d66596e467c6169786eea56beb8ffc@epcas5p2.samsung.com>
2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee
2017-01-06 7:05 ` Krzysztof Kozlowski
2017-01-06 7:20 ` Chanwoo Choi
2017-01-06 8:50 ` Krzysztof Kozlowski
2017-01-06 9:06 ` Chanwoo Choi
2017-01-06 9:12 ` Krzysztof Kozlowski
2017-01-06 3:59 ` [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Jaechul Lee
2017-01-06 7:09 ` Krzysztof Kozlowski
2017-01-06 7:59 ` Andi Shyti
2017-01-06 8:37 ` Krzysztof Kozlowski
2017-01-06 9:25 ` Andi Shyti
2017-01-06 3:59 ` [PATCH v3 3/5] input: Add support for the tm2 touchkey device driver Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 4/5] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 5/5] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox