[GIT PULL] extcon next for v4.11

[Chanwoo Choi <cw00.choi@samsung.com>]

Dear Greg,

This is extcon-next pull request for v4.11. I add detailed description of
this pull request on below. Please pull extcon with following updates.

Best Regards,
Chanwoo Choi

The following changes since commit a121103c922847ba5010819a3f250f1f7fc84ab8:

  Linux 4.10-rc3 (2017-01-08 14:18:17 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-4.11

for you to fetch changes up to 567ab5a81ba569b823b51f4af74f26c437e98b56:

  extcon: palmas: Use dev_dbg macro for the debug messages (2017-01-25 15:03:54 +0900)

----------------------------------------------------------------
Update extcon for 4.11

Detailed description for this pull request:
1. Add the new extcon driver.
- Intel INT3496 ACPI USB id detection driver detects whether
  EXTCON_USB_HOST is attached or detached. (extcon-intel-int3496.c)

2. Add the new type of external connector.
- EXTCON_CHG_USB_PD (USB Power Delivery) provides the increased
  power more than 7.5W to device with larger power demand.

3. Add the description for EXTCON_CHG_USB_(SDP|ACA|SLOW|FAST)
- EXTCON_CHG_USB_SDP should always appear together with EXTCON_USB
- EXTCON_CHG_USB_ACA would normally appear with EXTCON_USB_HOST.
- EXTCON_CHG_USB_SLOW can provide at least 500mA of current at 5V
- EXTCON_CHG_USB_FAST can provide at least 1A of current at 5V.

4. Modify the connector name of EXTCON_USB_HOST
- "USB_HOST" -> "USB-HOST"

5. Update the extcon core
- Move the private extcon structure into driver/extcon directory.
  The 'struct extcon_dev' should be only handled by extcon core
  to prevent the direct access and to maintain the integrity of it.
- Remove the ambigous operation of extcon_register_notifier()
  in case of the 'extcon_dev' instance is NULL. The user of
  extcon_register_notifier() have to specify the correct instance
  of the provider extcon driver.

6. Update the extcon drivers and fix the minor issues
- Update the extcon-axp288 driver to remove the unncessary code.
- Add pinctrl operation during suspend mode to extcon-usb-gpio driver.
- Clean up the extcon-arizona/adc-jack driver.
- Use the dev_dbg() for debug messsage on extcon-palmas driver.
- Return the error code on failure of extcon_sync()

----------------------------------------------------------------
Baolin Wang (3):
      extcon: Add documentation for EXTCON_CHG_USB_* and EXTCON_USB_*
      extcon: axp288: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set
      extcon: Add documentation for EXTCON_CHG_USB_SLOW/FAST

Chanwoo Choi (5):
      extcon: Remove potential problem when calling extcon_register_notifier()
      extcon: adc-jack: Use the internal data instead of using struct extcon_dev
      extcon: Move defintion of struct extcon_dev to driver/extcon directory
      extcon: Add new EXTCON_CHG_USB_PD type for USB Power Delivery
      extcon: Modify the name of EXTCON_USB_HOST connector

Charles Keepax (1):
      extcon: arizona: Simplify micd_pol_gpio handling

David Cohen (1):
      extcon: int3496: Add Intel INT3496 ACPI device extcon driver

Hans de Goede (7):
      extcon: axp288: Remove dependency on non-existing platform_data
      extcon: axp288: Remove usb_phy notification code
      extcon: axp288: Simplify axp288_handle_chrg_det_event
      extcon: axp288: Fix possibly reporting 2 cables in state true
      extcon: axp288: Use vbus-valid instead of -present to determine cable presence
      extcon: axp288: Remove unnecessary irq?_en register writes
      extcon: axp288: Fix the module not auto-loading

Pan Bian (1):
      extcon: Return error code on failure

Peter Chen (1):
      extcon: usb-gpio: Add pinctrl operation during system PM

Peter Foley (1):
      extcon: adc-jack: Fix incompatible pointer type warning

Roger Quadros (2):
      extcon: palmas: Check the parent instance to prevent the NULL
      extcon: palmas: Use dev_dbg macro for the debug messages

Srikant Ritolia (1):
      extcon: Restructure multi-line comments to follow codingstyle

 Documentation/extcon/intel-int3496.txt |  22 ++++
 drivers/extcon/Kconfig                 |  10 ++
 drivers/extcon/Makefile                |   1 +
 drivers/extcon/devres.c                |   2 +-
 drivers/extcon/extcon-adc-jack.c       |   2 +-
 drivers/extcon/extcon-arizona.c        |  20 ++--
 drivers/extcon/extcon-axp288.c         | 110 ++++++++------------
 drivers/extcon/extcon-intel-int3496.c  | 179 +++++++++++++++++++++++++++++++++
 drivers/extcon/extcon-max14577.c       |   6 +-
 drivers/extcon/extcon-max77693.c       |  12 ++-
 drivers/extcon/extcon-max77843.c       |  24 +++--
 drivers/extcon/extcon-palmas.c         |  21 ++--
 drivers/extcon/extcon-rt8973a.c        |   6 +-
 drivers/extcon/extcon-sm5502.c         |   6 +-
 drivers/extcon/extcon-usb-gpio.c       |   7 ++
 drivers/extcon/extcon.c                |  45 +++------
 drivers/extcon/extcon.h                |  62 ++++++++++++
 include/linux/extcon.h                 |  71 +++----------
 include/linux/extcon/extcon-adc-jack.h |   2 +-
 19 files changed, 415 insertions(+), 193 deletions(-)
 create mode 100644 Documentation/extcon/intel-int3496.txt
 create mode 100644 drivers/extcon/extcon-intel-int3496.c
 create mode 100644 drivers/extcon/extcon.h